IP 550 INOX – submersible pump
The IBO IP 550 INOX submersible pump is a series of devices with a stainless steel housing,
designed for pumping clean and slightly contaminated water free of
abrasive particles. The power range from 550 W (IP 550 INOX) to 1100 W (IP 1100 INOX) makes it possible to choose
the model to match the capacity required for a given installation. The stainless steel housing design
reduces susceptibility to mechanical damage and corrosion in more demanding operating conditions.
Who is it for
-
Water and sewer installation companies – the stainless steel housing is suitable for frequent transfer of the pump between successive service calls.
-
Industrial plants and maintenance departments – the housing’s increased mechanical resistance facilitates operation in harsher conditions than a technopolymer housing.
-
Farms and livestock operations – the pumps are suitable for pumping water from ponds, reservoirs, and shallow ring wells for irrigation or watering animals.
-
Wholesale and hardware stores – the power range from 550 W to 1100 W makes it possible to offer a model suited to installations of various scales.
Applications
The IP INOX series of submersible pumps is intended for pumping clean and slightly
contaminated water without abrasive particles such as sand. The pumps are designed
for draining flooded rooms, basements, garages, swimming pools, and sump pits, as well as
for pumping water from ponds, rivers, and surface water reservoirs.
The devices operate vertically, fully submerged, at a maximum temperature
of the pumped liquid up to 35°C. The permissible size of soft solid contaminants is
30 mm, allowing operation in slightly contaminated water without the risk of blockage
impeller. The IP INOX 230 V submersible pump is suitable for both domestic installations,
as well as in applications requiring greater housing resistance to damage.
IP INOX series features
IP INOX series pumps feature an AISI 304 stainless steel housing, while the shaft and rotor
The motor shaft is made of the same material. The impeller is made of PPO polymer, and the mechanical seal
the SiC/graphite arrangement provides resistance to typical contaminants found
in raw and slightly contaminated water.
The integrated float switch automatically switches the pump on and off depending
depending on the water level, also providing basic protection against dry running.
The thermal protection built into the winding protects the motor against overheating,
and the threaded, stepped discharge outlet allows hoses with different diameters to be connected.
- Pump type: submersible pump for clean and slightly contaminated water, stainless steel housing
- Power supply: 230 V (single-phase)
- Insulation class: B
- Degree of protection: IP68
- Operating mode: continuous
- Operating position: vertical
- Rotational speed: 2850 rpm
- Max. liquid temperature: 35°C
- Permissible size of solid contaminants: 30 mm
- Power cable length: 10 m
- Switch: float switch
- Motor protection: thermal, built into the winding
- Discharge connection: threaded, stepped, suitable for hoses of various diameters
- Materials: housing – AISI 304 stainless steel, shaft and rotor – AISI 304 stainless steel, impeller – PPO polymer, mechanical seal – SiC/graphite
IBO – 24 months (2 years) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently Asked Questions (FAQ) – IP INOX submersible pump
What type of water is the IP INOX submersible pump designed for?
IP INOX series pumps are designed for clean and slightly contaminated water,
that does not contain abrasive elements such as sand. The permissible size of
soft solid contaminants is 30 mm.
How does the pump protect itself against dry running?
Protection is provided by a built-in float switch that cuts off power to the motor
when the water level falls below the safe minimum. Additionally, thermal protection
in the winding protects the motor against overheating.
What is the difference between the IP INOX pump and the standard IP version?
Both lines have identical hydraulic and electrical parameters within corresponding
the same power, but they differ in housing material – the IP INOX version uses
AISI 304 stainless steel, while the standard IP series has a technopolymer housing. The choice depends
whether additional mechanical resistance of the housing is the priority (IP INOX),
or the low weight of the device (IP).
How do I choose the right IP INOX pump model for my needs?
The choice of model depends on the required head and capacity – the series includes
models from 550 W (IP 550 INOX) to 1100 W (IP 1100 INOX), selected according to the extent of flooding
or the size of the tank being emptied. If in doubt, please contact
contact with the technical department.
Where can I buy an IP INOX submersible pump?
Dambat does not sell directly. IP INOX series pumps are available from partners
retail outlets, installation wholesalers, and authorized online distributors.
What warranty terms apply to the IP INOX pump?
IBO – 24 months (2 years) manufacturer's warranty. Warranty and post-warranty service
provided by Dambat.
