IP 400 RAIN - submersible pump for rainwater and clean water
submersible pump IP 400 RAIN by IBO is a 400 W device designed for pumping
rainwater and other clean water, free from solid pollutants. Narrowed passage
the rotor limits the tolerance to contamination compared to other models of the IP series,
in return providing a higher lifting height of up to 10 m. Built-in float switch
automatically controls the pump and protects the engine against starting without water.
For whom
-
House and garden owners – lifting height up to 10 m allows you to use the collected rainwater to water the garden.
-
Installation companies – compact dimensions and low weight make it easy to install the pump inside a rainwater tank.
-
Agricultural and horticultural farms – higher lifting height than in other models of the IP series allows Power supply irrigation installation located higher than the reservoir.
-
Wholesale and technical stores – the model complements the offer with a variant dedicated to clean rainwater, distinguished from the rest of the IP series.
Application
submersible pump IP 400 RAIN is designed for pumping rainwater and other water
clean, free of solid impurities. The device is used to use the collected data
rainwater for watering the garden, washing or powering household installations
not requiring drinking water.
The pump operates in a vertical position, fully submerged, at maximum temperature
pumped liquid up to 35°C. Unlike other models of the IP series, the IP 400 RAIN has a narrowed design
rotor passage, therefore the pumped medium must be free from any contamination
solids. submersible pump IP 400 RAIN 230 V works with rainwater tanks
and control automation selected for the installation.
Features of the IP 400 RAIN pump
The IP 400 RAIN pump is constructed with a technopolymer casing, and the shaft and rotor
The engine is made of AISI 304 stainless steel. The impeller is made of PPO polymer and stuffing box
mechanical in the SiC/graphite system ensure resistance to typical operating conditions
when pumping clean water.
The integrated float switch automatically turns the pump on and off as required
from the water level, at the same time providing basic protection against dry running.
Thermal protection built into the winding protects the motor against overheating,
and the threaded discharge port allows the connection of hoses of various diameters.
- Pump type: submersible pump for clean and rainwater
- Power supply: 230V (single phase)
- Engine power: 400 W
- Lifting height (Hmax): 10 m
- Efficiency (Qmax): 83 l/min
- Insulation class: B
- Degree of protection: IP68
- Working mode: continuous
- Working position: vertical
- Rotational speed: 2850 rpm
- Max. liquid temperature: 35°C
- Flow through the rotor: 1mm
- Minimum immersion level: 2 m
- Switch: float switch
- Motor protection: thermal, built into the winding
- Materials: housing – technopolymer, shaft and rotor – AISI 304 stainless steel, rotor – PPO polymer, mechanical stuffing box – SiC/graphite
IBO – 24 months (2 years) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – submersible pump IP 400 RAIN
What type of water is the IP 400 RAIN pump intended for?
The IP 400 RAIN pump is intended only for clean water, including rainwater,
free of any solid impurities. Narrowed rotor passage approx
1 mm does not tolerate contamination permitted in other models of the IP series.
How does the pump protect itself against dry running?
Protection is provided by a built-in float switch that shuts off Power supply engine,
when the water level drops below a safe minimum. Additionally, thermal protection
in the winding protects the motor against overheating.
What is the difference between the IP 400 RAIN pump and other IP series models?
IP 400 RAIN has a much narrower passage through the rotor (1 mm compared to 30 mm in the others
models), therefore it can only work with completely clean water, without any contamination
solids. In return, it achieves a higher lifting height of up to 10 m, higher than the IP 400 models
or IP 550 with similar power.
What is the maximum lifting height achieved by the IP 400 RAIN pump?
The IP 400 RAIN pump reaches a maximum lifting height of up to 10 m with capacity
up to 83 l/min, which allows you to power garden installations located higher than the tank
for rainwater. If you have any doubts about the selection, we encourage you to:
contact the technical department.
Where can you buy the IP 400 RAIN submersible pump?
Dambat does not sell directly. The IP 400 RAIN pump is available from partners
commercial stores, installation wholesalers and authorized online distributors.
What warranty conditions apply to the IP 400 RAIN pump?
IBO – 24 months (2 years) manufacturer's warranty. Warranty and post-warranty service
Dambat assures.
