IP 400 RAIN – submersible pump for rainwater and clean water
The IBO IP 400 RAIN submersible pump is a 400 W device designed for pumping
rainwater and other clean water, free of solid contaminants. The narrowed impeller passage
the impeller limits its tolerance for contaminants compared with the other models in the IP series,
instead providing a greater head of up to 10 m. The integrated float switch
automatically controls the pump's operation and protects the motor from starting without water.
Who is it for
-
Home and garden owners – a head of up to 10 m allows collected rainwater to be used for garden watering.
-
Installation companies – the compact dimensions and low weight make it easier to install the pump inside a rainwater tank.
-
Farms and horticultural businesses – the greater head than in the other IP series models enables it to supply an irrigation system located higher than the tank.
-
Wholesale and technical stores – the model expands the range with a version dedicated to clean rainwater, distinguishing it from the rest of the IP series.
Applications
The IP 400 RAIN submersible pump is designed for pumping rainwater and other
clean water, free of solid contaminants. The device is designed to use collected
rainwater for garden watering, washing, or supplying domestic utility systems
not requiring drinking water.
The pump operates vertically, fully submerged, at a maximum temperature
pumped liquid up to 35°C. Unlike the other models in the IP series, the IP 400 RAIN has a narrowed
the impeller passage, so the pumped medium must be free of any solid contaminants
solids. The IP 400 RAIN 230 V submersible pump works with rainwater tanks
and control automation selected for the installation.
Features of the IP 400 RAIN pump
The IP 400 RAIN pump features a technopolymer housing, while the shaft and rotor
the motor is made of AISI 304 stainless steel. The impeller is made of PPO polymer, and the cable gland
The mechanical seal in a SiC/graphite arrangement ensures resistance to typical operating conditions
when pumping clean water.
The integrated float switch automatically starts and stops the pump depending
depending on the water level, while also providing basic protection against dry running.
The thermal protection built into the winding protects the motor from overheating,
and the threaded discharge connection allows hoses of various diameters to be connected.
- Pump type: submersible pump for clean and rainwater
- Power supply: 230 V (single-phase)
- Motor power: 400 W
- Head (Hmax): 10 m
- Flow rate (Qmax): 83 l/min
- Insulation class: B
- Protection rating: IP68
- Operating mode: continuous
- Operating position: vertical
- Rotational speed: 2850 rpm
- Max. liquid temperature: 35°C
- Impeller passage: 1 mm
- Minimum immersion level: 2 m
- Switch: float switch
- Motor protection: thermal, built into the winding
- Materials: housing – technopolymer, shaft and rotor – AISI 304 stainless steel, impeller – PPO polymer, mechanical seal – SiC/graphite
IBO – 24 months (2 years) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certifications.
Frequently Asked Questions (FAQ) – IP 400 RAIN submersible pump
What type of water is the IP 400 RAIN pump intended for?
The IP 400 RAIN pump is intended exclusively for clean water, including rainwater,
free of any solid contaminants. The narrowed impeller passage, measuring
The 1 mm passage does not tolerate contaminants permitted in the other IP series models.
How does the pump protect against dry running?
Protection is provided by a built-in float switch that cuts off power to the motor
when the water level falls below the safe minimum. Additionally, the thermal protection
in the winding protects the motor from overheating.
How does the IP 400 RAIN pump differ from the other IP series models?
The IP 400 RAIN has a significantly narrower impeller passage (1 mm compared with 30 mm in the other
models), so it can operate only with completely clean water, free of solid contaminants
solid particles. Instead, it achieves a higher head of up to 10 m, greater than that of the IP 400
or the IP 550, which have similar power.
What maximum head does the IP 400 RAIN pump achieve?
The IP 400 RAIN pump achieves a maximum head of up to 10 m at a flow rate of
up to 83 l/min, allowing it to supply garden installations located higher than the tank
for rainwater. If you are unsure about the selection, we encourage you to
contact with the technical department.
Where can I buy the IP 400 RAIN submersible pump?
Dambat does not sell directly. The IP 400 RAIN pump is available from partners
commercial outlets, installation wholesalers, and authorized online distributors.
What warranty terms apply to the IP 400 RAIN pump?
IBO – 24 months (2 years) manufacturer's warranty. Warranty and post-warranty service
provided by Dambat.
