Who it's for
- Rainwater tank owners - automatic tank emptying is controlled by a level sensor, so there is no need to switch on the pump manually.
- Fish pond owners - the filter in the base helps protect small fish from entering the pump.
- Users working with seawater - dual seals, a PPO polymer housing and a stainless steel shaft prepare the pump for operation in salt water.
- Installers and service companies - clear operating characteristics, a 1" outlet and a simple base configuration make it easy to choose the right pump.
- Facilities with technical tanks - the ability to pump water down to 1 mm reduces the amount of water left in the tank.
Applications
- Emptying storage and technical tanks and periodically lowering the water level in them.
- Pumping rainwater from storage tanks.
- Pumping technically clean fresh and seawater (salinity max. 25‰, operation max. 2 h).
- Operation in fish ponds with the filter mounted in the base.
- Pumps clean water down to a level of 1 mm when the base is removed.
The IP 370 SEA 230 V submersible pump operates automatically, controlled by a water level sensor.
Features, description and technical data
The IBO IP 370 SEA is a submersible pump for technically clean fresh and seawater. In its design, we used a dual shaft sealing system - mechanical and lip seals - to protect the motor and internal components from contact with the pumped water. We confirmed the seal's durability with a 3,500-hour continuous operation test.
Automatic water level control
The pump is equipped with an external electronic level sensor that detects the limit levels and automatically switches the pump on and off. Position the sensor next to the pump, on the same surface. When the water drops to the switch-off level, the pump stops after a 10-second delay.
- With the filter base and float adapter: switches on at approx. 3.5 cm and switches off at approx. 2 cm.
- Without the base and float adapter: switches on at approx. 1.5 cm, runs down to approx. 1 cm, and pumps water down to a level of 1 mm.
The filter base is mounted with a twist and protects the pump from drawing in larger contaminants. Operating without the base, and therefore without the filter, is permitted only in clean water. Clean the filter regularly by rinsing it under running water.
Operating parameters
- Maximum head: 7 m; maximum flow rate: 100 l/min (6 m³/h). According to the performance curve, at a head of approx. 5 m, the pump achieves approx. 50 l/min.
- Motor power: 370 W; power supply: 230 V / 50 Hz; current draw: 1.7 A; capacitor: 8 µF; rotational speed: 2850 rpm.
- Protection rating: IPX8; insulation class: F.
- Discharge outlet: 1"; weight: 4.5 kg.
- Maximum liquid temperature: 35°C; water pH: 6.5–8.5; maximum submersion depth: 5 m.
- Seawater: maximum salinity 25‰; maximum operating time 2 h. Rinse the pump with clean water after use.
- Maximum contaminant diameter: 1–3 mm; solids content up to 10%, with no abrasive contaminants such as sand or gravel.
Materials
- Pump and motor housing: PPO polymer.
- Impeller: polyamide (PA).
- Shaft: stainless steel.
Installation and operation
Lower and lift the pump using a rope attached to the handle - never by the power cable or float switch cable. Secure the discharge hose to the connector with a clamp; we recommend installing a check valve on the discharge outlet to reduce frequent pump starts. The power supply must have a functioning ground connection and a residual current device with a trip current of up to 30 mA. The pump must not run dry, with a pressurized water source, or for more than 10 minutes with the discharge side closed. Do not use it to pump sewage, flammable liquids, oils, or water above 35°C, or install it where it may be exposed to freezing temperatures. After each use, remove the pump from the tank and rinse it with clean water.
The pump complies with the MD 2006/42/EC, LVD 2014/35/EU, and EMC 2014/30/EU directives, as confirmed by the EU declaration of conformity included with the operating manual.
The pump is designed to pump clean water, including rainwater, stored water, and seawater. It is not intended to verify water quality or treat water intended for drinking.
Warranty
IBO – 24 months (2 years) manufacturer's warranty. The warranty covers equipment operated in the territory of the Republic of Poland, and warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and water engineering equipment with quality certificates.
Frequently asked questions (FAQ) – what is the IP 370 SEA submersible pump used for?
What is the IP 370 SEA submersible pump used for?
We designed the IP 370 SEA pump to pump clean, technically pure fresh and seawater—for emptying tanks, pumping rainwater, and use in fish ponds. The level sensor automatically switches the pump on and off.
Why is the IP 370 SEA pump suitable for seawater?
The pump is equipped with a double shaft seal, with mechanical and lip seals. Its housing is made of PPO polymer, its impeller of polyamide, and its shaft of stainless steel. The seal's durability has been confirmed by a 3,500-hour continuous operation test. The pump can operate in seawater with salinity of up to 25‰ for a maximum of 2 hours. Rinse it with clean water after use.
What should I consider when choosing the IBO IP 370 SEA pump?
The pump delivers a maximum head of 7 m and a flow rate of 100 l/min. Actual output decreases as the delivery head and hose length increase, and as the hose diameter decreases. The water temperature must not exceed 35°C, and the water must be free of sand and other abrasive contaminants.
Where can I buy the IP 370 SEA submersible pump manufactured by Dambat?
As a manufacturer, we do not sell directly. The IP 370 SEA submersible pump is available from our trade partners, plumbing wholesalers, and authorized online distributors.
How do I pump water down to a level of 1 mm?
Remove the base with the filter by turning it to the left, and remove the float adapter. Place the float next to the pump on the same surface. Operation without the filter is permitted only in clean water.
How do I care for the IP 370 SEA pump?
The filter in the base should be cleaned regularly under running water, and the pump should be removed from the tank and rinsed with clean water after each use. All work must be carried out with the power disconnected, and the pump should be stored in a dry room.
What warranty does the IP 370 SEA pump have?
IBO – 24 months (2 years) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.