Description
IBOPROM AUTO 1200 – submersible pump with an electronic controller
IBOPROM AUTO is a series of high-pressure submersible pumps by IBO with an electronic control unit. The pump switches on when the valve is opened and switches off when it is closed, maintaining constant pressure in the system. It pumps raw, technically clean or slightly contaminated water – for watering, drawing and pumping water in domestic applications, and for operation in a pressurised system.
Who it is for
- Domestic users – constant water pressure thanks to the electronic controller; the pump starts when the tap is opened.
- Allotment holders and gardeners – convenient watering with automatic pump start-up and shutdown.
- Owners of ring wells – drawing raw water into a building without the need to fully submerge the pump.
- Installers – installation of a pump with built-in control, without a separate automation set.
Applications
IBOPROM AUTO is used for drawing and pumping raw water in domestic applications and for watering wherever constant pressure in the system is required. The electronic controller switches the pump off when the outlet valve is closed and starts it again when the valve is opened. The pump draws technically clean or slightly contaminated water that does not contain abrasive particles.
It is suitable for ring wells and for drawing water from sources with a water table close to the surface. The cooling jacket allows the pump to operate without being fully submerged. The 230 V IBOPROM AUTO submersible pump maintains constant pressure in a domestic system supplying the installation. The pump is not a water-treatment device – when using it for other purposes, we recommend ensuring appropriate water treatment.
Features of the IBOPROM AUTO submersible pump
IBOPROM AUTO comprises high-pressure submersible pumps with an electronic control unit. When the outlet valve is closed, the pump switches off and enters standby mode while maintaining pressure in the system. When the valve is opened, the pump starts automatically, making its operation similar to that of a domestic pressure-boosting system.
The design includes a motor cooling jacket, so the pump does not have to be fully submerged. The motor is protected against overheating and dry running. The housing and shaft are made of AISI 304 stainless steel, the impeller is made of PPO polymer, and the mechanical seal uses SiC/graphite/NBR.
The series includes the IBOPROM AUTO 1000 (1.0 kW, lifting height up to 37 m) and IBOPROM AUTO 1200 (1.2 kW, up to 47 m) models. Both models pump up to 100 l/min of technically clean or slightly contaminated water without abrasive particles such as sand.
- Type: high-pressure submersible pump with an electronic controller
- Models: IBOPROM AUTO 1000 (37 m) and IBOPROM AUTO 1200 (47 m)
- Motor power: 1.0 / 1.2 kW (depending on the model)
- Maximum flow rate: 100 l/min
- Power supply: 230 V / 50 Hz
- Current consumption: 3.9 / 5.4 A (depending on the model)
- Rotational speed: 2800 RPM
- Discharge outlet: 1"
- Impeller passage: 0.5 mm (technically clean / slightly contaminated water)
- Operating mode: continuous
- Protection rating / insulation class: IPX8 / B
- Maximum liquid temperature: 35°C
- Control: electronic controller (start/stop according to the valve, constant pressure)
- Protection: against dry running and overheating (in the winding)
- Power cable length: 10 m
- Materials: AISI 304 (housing, shaft), PPO polymer (impeller), SiC/graphite/NBR mechanical seal
Funding under the Mikroretencja 2026 programme
The IBOPROM AUTO submersible pump may form part of a rainwater-management installation covered by the nationwide “Mikroretencja” programme (2026). The programme is aimed at owners of single-family homes and supports the retention and use of rainwater on their own properties – including tanks, pumps, filters and infiltration systems. Find out more about the Mikroretencja programme on our website.
IBO – 24 months (2 years) of the manufacturer’s warranty. Dambat provides warranty and post-warranty service.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – IBO IBOPROM AUTO submersible pump
What is the IBOPROM AUTO submersible pump used for?
IBOPROM AUTO is a high-pressure submersible pump with an electronic controller, designed for drawing and pumping raw water in domestic applications and for watering. It maintains constant pressure in the system and starts when the valve is opened. It pumps technically clean or slightly contaminated water.
How does the controller in the IBOPROM AUTO pump work?
When the outlet valve is closed, the pump switches off and enters standby mode while maintaining pressure in the system. When the valve is opened, the pump starts automatically. As a result, it operates similarly to a domestic pressure-boosting system.
How does IBOPROM AUTO differ from the INOX version?
IBOPROM AUTO controls operation באמצעות an electronic controller that responds to the opening and closing of the valve while maintaining constant pressure. The INOX version has a float switch that controls the pump according to the water level. AUTO is better suited to supplying a pressurised system, while INOX is suitable for drawing and draining according to the water level.
What type of water can be pumped with an IBOPROM pump?
The pump is designed for technically clean or slightly contaminated water that does not contain abrasive particles such as sand. The impeller passage is 0.5 mm, so water containing abrasive suspended particles could damage the pump. The maximum liquid temperature is 35°C.
Which model should you choose – IBOPROM AUTO 1000 or 1200?
IBOPROM AUTO 1000 has a power rating of 1.0 kW and lifts water to a height of up to 37 m. IBOPROM AUTO 1200 has a power rating of 1.2 kW and a lifting height of up to 47 m. Both models achieve a flow rate of up to 100 l/min, while the more powerful model is chosen for greater lifting heights.
Where can I buy an IBO IBOPROM AUTO pump?
As a manufacturer, we do not sell directly. The IBO IBOPROM AUTO submersible pump can be purchased from our trade partners, installation wholesalers and authorised online distributors. The model is selected according to the lifting height and the method of drawing water.
What is the warranty on an IBO IBOPROM pump?
IBO – 24 months (2 years) of the manufacturer’s warranty. Dambat provides warranty and post-warranty service. For questions about model selection, it is best to contact an authorised distributor.
- Lift: 47.0 m,
- Capacity: 100.0 l/min.,
- Power: 1.2 kW,
- Power supply: 1~230 V,
- Current: 5.4 A,
- Frequency: 50 Hz,
- Motor speed: 2800 rpm,
- Insulation class: ,
- Operating mode: continuous,
- Protection rating: IPX8,
- Impeller type: ,
- Particle size: mm,
- Connection [DN/cale]: 1,
- Discharge direction: ,
- Built-in float switch/probe: ,
- Operating position: Vertical,
- Power cable length: 10.0 m,
- Length/height/width: 620/270/425 mm,
- Weight: 9.8 kg,
Download: IBO_Instrukcja_Pompy_Zatapialne.pdf
Download: GARAN_Prawny_obowiazek_zapewnienia_zgodnosci_towaru_z_umowa.pdf
IBOPROM AUTO 1200 – submersible pump with an electronic controller
IBOPROM AUTO is a series of high-pressure submersible pumps by IBO with an electronic control unit. The pump switches on when the valve is opened and switches off when it is closed, maintaining constant pressure in the system. It pumps raw, technically clean or slightly contaminated water – for watering, drawing and pumping water in domestic applications, and for operation in a pressurised system.
Who it is for
- Domestic users – constant water pressure thanks to the electronic controller; the pump starts when the tap is opened.
- Allotment holders and gardeners – convenient watering with automatic pump start-up and shutdown.
- Owners of ring wells – drawing raw water into a building without the need to fully submerge the pump.
- Installers – installation of a pump with built-in control, without a separate automation set.
Applications
IBOPROM AUTO is used for drawing and pumping raw water in domestic applications and for watering wherever constant pressure in the system is required. The electronic controller switches the pump off when the outlet valve is closed and starts it again when the valve is opened. The pump draws technically clean or slightly contaminated water that does not contain abrasive particles.
It is suitable for ring wells and for drawing water from sources with a water table close to the surface. The cooling jacket allows the pump to operate without being fully submerged. The 230 V IBOPROM AUTO submersible pump maintains constant pressure in a domestic system supplying the installation. The pump is not a water-treatment device – when using it for other purposes, we recommend ensuring appropriate water treatment.
Features of the IBOPROM AUTO submersible pump
IBOPROM AUTO comprises high-pressure submersible pumps with an electronic control unit. When the outlet valve is closed, the pump switches off and enters standby mode while maintaining pressure in the system. When the valve is opened, the pump starts automatically, making its operation similar to that of a domestic pressure-boosting system.
The design includes a motor cooling jacket, so the pump does not have to be fully submerged. The motor is protected against overheating and dry running. The housing and shaft are made of AISI 304 stainless steel, the impeller is made of PPO polymer, and the mechanical seal uses SiC/graphite/NBR.
The series includes the IBOPROM AUTO 1000 (1.0 kW, lifting height up to 37 m) and IBOPROM AUTO 1200 (1.2 kW, up to 47 m) models. Both models pump up to 100 l/min of technically clean or slightly contaminated water without abrasive particles such as sand.
- Type: high-pressure submersible pump with an electronic controller
- Models: IBOPROM AUTO 1000 (37 m) and IBOPROM AUTO 1200 (47 m)
- Motor power: 1.0 / 1.2 kW (depending on the model)
- Maximum flow rate: 100 l/min
- Power supply: 230 V / 50 Hz
- Current consumption: 3.9 / 5.4 A (depending on the model)
- Rotational speed: 2800 RPM
- Discharge outlet: 1"
- Impeller passage: 0.5 mm (technically clean / slightly contaminated water)
- Operating mode: continuous
- Protection rating / insulation class: IPX8 / B
- Maximum liquid temperature: 35°C
- Control: electronic controller (start/stop according to the valve, constant pressure)
- Protection: against dry running and overheating (in the winding)
- Power cable length: 10 m
- Materials: AISI 304 (housing, shaft), PPO polymer (impeller), SiC/graphite/NBR mechanical seal
Funding under the Mikroretencja 2026 programme
The IBOPROM AUTO submersible pump may form part of a rainwater-management installation covered by the nationwide “Mikroretencja” programme (2026). The programme is aimed at owners of single-family homes and supports the retention and use of rainwater on their own properties – including tanks, pumps, filters and infiltration systems. Find out more about the Mikroretencja programme on our website.
IBO – 24 months (2 years) of the manufacturer’s warranty. Dambat provides warranty and post-warranty service.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – IBO IBOPROM AUTO submersible pump
What is the IBOPROM AUTO submersible pump used for?
IBOPROM AUTO is a high-pressure submersible pump with an electronic controller, designed for drawing and pumping raw water in domestic applications and for watering. It maintains constant pressure in the system and starts when the valve is opened. It pumps technically clean or slightly contaminated water.
How does the controller in the IBOPROM AUTO pump work?
When the outlet valve is closed, the pump switches off and enters standby mode while maintaining pressure in the system. When the valve is opened, the pump starts automatically. As a result, it operates similarly to a domestic pressure-boosting system.
How does IBOPROM AUTO differ from the INOX version?
IBOPROM AUTO controls operation באמצעות an electronic controller that responds to the opening and closing of the valve while maintaining constant pressure. The INOX version has a float switch that controls the pump according to the water level. AUTO is better suited to supplying a pressurised system, while INOX is suitable for drawing and draining according to the water level.
What type of water can be pumped with an IBOPROM pump?
The pump is designed for technically clean or slightly contaminated water that does not contain abrasive particles such as sand. The impeller passage is 0.5 mm, so water containing abrasive suspended particles could damage the pump. The maximum liquid temperature is 35°C.
Which model should you choose – IBOPROM AUTO 1000 or 1200?
IBOPROM AUTO 1000 has a power rating of 1.0 kW and lifts water to a height of up to 37 m. IBOPROM AUTO 1200 has a power rating of 1.2 kW and a lifting height of up to 47 m. Both models achieve a flow rate of up to 100 l/min, while the more powerful model is chosen for greater lifting heights.
Where can I buy an IBO IBOPROM AUTO pump?
As a manufacturer, we do not sell directly. The IBO IBOPROM AUTO submersible pump can be purchased from our trade partners, installation wholesalers and authorised online distributors. The model is selected according to the lifting height and the method of drawing water.
What is the warranty on an IBO IBOPROM pump?
IBO – 24 months (2 years) of the manufacturer’s warranty. Dambat provides warranty and post-warranty service. For questions about model selection, it is best to contact an authorised distributor.