Description
IBOPROM AUTO 1000 – submersible pump with electronic automatic control
IBOPROM AUTO is a series of high-pressure submersible pumps by IBO with electronic automatic control. The pump switches on when the valve is opened and switches off when it is closed, maintaining constant pressure in the system. It pumps raw, technically clean, or slightly contaminated water for watering, water intake and transfer in the household, and operation in a pressurized system.
Who it is for
- Household users – constant water pressure thanks to the electronic automatic control; the pump starts when the tap is opened.
- Allotment holders and gardeners – convenient watering with automatic pump start and stop.
- Owners of ring wells – supplying raw water to the building without the need to fully submerge the pump.
- Installers – installation of a pump with built-in control, without a separate automatic control set.
Applications
IBOPROM AUTO is used for drawing and pumping raw water in households and for watering, wherever constant pressure in the system is required. The electronic automatic control switches the pump off when the outlet valve is closed and starts it again when the valve is opened. The pump draws technically clean or slightly contaminated water that does not contain abrasive particles.
It performs well in ring wells and when obtaining water from sources with a water table close to the surface. The cooling jacket allows the pump to operate without being fully submerged. The IBOPROM AUTO 230 V submersible pump maintains constant pressure in a domestic system supplying the installation. The pump is not a water treatment device – when using it for other purposes, we recommend ensuring appropriate water treatment.
Features of the IBOPROM AUTO submersible pump
IBOPROM AUTO is a series of high-pressure submersible pumps with electronic automatic control. When the outlet valve is closed, the pump switches off and enters standby mode while maintaining pressure in the system. When the valve is opened, the pump starts automatically, making its operation similar to that of a domestic pressure-boosting system.
The design features a cooling jacket around the motor, so the pump does not need to be fully submerged. The motor is protected against overheating and dry running. The housing and shaft are made of AISI 304 stainless steel, the impeller is made of PPO polymer, and the mechanical seal uses SiC/graphite/NBR.
The series includes the IBOPROM AUTO 1000 (1.0 kW, lifting height up to 37 m) and IBOPROM AUTO 1200 (1.2 kW, up to 47 m) models. Both models pump up to 100 l/min of technically clean or slightly contaminated water without abrasive particles such as sand.
- Type: high-pressure submersible pump with electronic automatic control
- Models: IBOPROM AUTO 1000 (37 m) and IBOPROM AUTO 1200 (47 m)
- Motor power: 1.0 / 1.2 kW (depending on the model)
- Maximum flow rate: 100 l/min
- Power supply: 230 V / 50 Hz
- Current consumption: 3.9 / 5.4 A (depending on the model)
- Rotational speed: 2800 RPM
- Discharge connection: 1"
- Impeller passage: 0.5 mm (technically clean / slightly contaminated water)
- Operating mode: continuous
- Protection rating / insulation class: IPX8 / B
- Maximum liquid temperature: 35°C
- Control: electronic automatic control (start/stop according to the valve, constant pressure)
- Protection: against dry running, thermal protection (in the winding)
- Power cable length: 10 m
- Materials: AISI 304 (housing, shaft), PPO polymer (impeller), SiC/graphite/NBR mechanical seal
Funding under the Mikroretencja 2026 program
The IBOPROM AUTO submersible pump may form part of a rainwater management system covered by the nationwide “Mikroretencja” (2026) program. The program is aimed at owners of single-family homes and supports retaining and using rainwater on their own property – including tanks, pumps, filters and drainage systems. Learn more about the Mikroretencja program on our website.
IBO – 24 months (2 years) manufacturer’s warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and water engineering equipment with quality certificates.
Frequently asked questions (FAQ) – IBOPROM AUTO IBO submersible pump
What is the IBOPROM AUTO submersible pump used for?
IBOPROM AUTO is a high-pressure submersible pump with electronic automatic control, designed for drawing and pumping raw water in households and for watering. It maintains constant pressure in the system and starts when the valve is opened. It pumps technically clean or slightly contaminated water.
How does the automatic control in the IBOPROM AUTO pump work?
When the outlet valve is closed, the pump switches off and enters standby mode while maintaining pressure in the system. When the valve is opened, the pump starts automatically. This allows it to operate similarly to a domestic pressure-boosting system.
How does IBOPROM AUTO differ from the INOX version?
IBOPROM AUTO controls operation using electronic automatic control that responds to the opening and closing of the valve while maintaining constant pressure. The INOX version has a float switch that controls the pump according to the water level. AUTO is better suited to supplying pressurized systems, while INOX is suitable for drawing and draining water according to the level.
What type of water can be pumped with an IBOPROM pump?
The pump is designed for technically clean or slightly contaminated water that does not contain abrasive particles such as sand. The impeller passage is 0.5 mm, so water containing suspended abrasive particles could damage the pump. The maximum liquid temperature is 35°C.
Which model should I choose – IBOPROM AUTO 1000 or 1200?
IBOPROM AUTO 1000 has a power rating of 1.0 kW and lifts water to a height of up to 37 m. IBOPROM AUTO 1200 has a power rating of 1.2 kW and a lifting height of up to 47 m. Both models achieve a flow rate of up to 100 l/min, while the more powerful model is chosen for greater lifting heights.
Where can I buy an IBOPROM AUTO IBO pump?
As the manufacturer, we do not sell directly. The IBO IBOPROM AUTO submersible pump can be purchased from our trade partners, installation wholesalers and authorized online distributors. The model should be selected according to the lifting height and the method of drawing water.
What is the warranty on the IBOPROM IBO pump?
IBO – 24 months (2 years) manufacturer’s warranty. Warranty and post-warranty service is provided by Dambat. For questions about choosing a model, it is best to contact an authorized distributor.
- Lift: 37.0 m,
- Capacity: 100.0 l/min.,
- Power: 1.0 kW,
- Power supply: 1~230 V,
- Current: 3.9 A,
- Frequency: 50 Hz,
- Motor speed: 2800 rpm,
- Insulation class: ,
- Operating mode: continuous,
- Protection rating: IPX8,
- Impeller type: ,
- Particle size: mm,
- Connection [DN/cale]: 1,
- Discharge direction: ,
- Built-in float switch/probe: ,
- Operating position: Vertical,
- Power cable length: 10.0 m,
- Length/height/width: 620/270/425 mm,
- Weight: 9.2 kg,
Download: IBO_Instrukcja_Pompy_Zatapialne.pdf
Download: GARAN_Prawny_obowiazek_zapewnienia_zgodnosci_towaru_z_umowa.pdf
IBOPROM AUTO 1000 – submersible pump with electronic automatic control
IBOPROM AUTO is a series of high-pressure submersible pumps by IBO with electronic automatic control. The pump switches on when the valve is opened and switches off when it is closed, maintaining constant pressure in the system. It pumps raw, technically clean, or slightly contaminated water for watering, water intake and transfer in the household, and operation in a pressurized system.
Who it is for
- Household users – constant water pressure thanks to the electronic automatic control; the pump starts when the tap is opened.
- Allotment holders and gardeners – convenient watering with automatic pump start and stop.
- Owners of ring wells – supplying raw water to the building without the need to fully submerge the pump.
- Installers – installation of a pump with built-in control, without a separate automatic control set.
Applications
IBOPROM AUTO is used for drawing and pumping raw water in households and for watering, wherever constant pressure in the system is required. The electronic automatic control switches the pump off when the outlet valve is closed and starts it again when the valve is opened. The pump draws technically clean or slightly contaminated water that does not contain abrasive particles.
It performs well in ring wells and when obtaining water from sources with a water table close to the surface. The cooling jacket allows the pump to operate without being fully submerged. The IBOPROM AUTO 230 V submersible pump maintains constant pressure in a domestic system supplying the installation. The pump is not a water treatment device – when using it for other purposes, we recommend ensuring appropriate water treatment.
Features of the IBOPROM AUTO submersible pump
IBOPROM AUTO is a series of high-pressure submersible pumps with electronic automatic control. When the outlet valve is closed, the pump switches off and enters standby mode while maintaining pressure in the system. When the valve is opened, the pump starts automatically, making its operation similar to that of a domestic pressure-boosting system.
The design features a cooling jacket around the motor, so the pump does not need to be fully submerged. The motor is protected against overheating and dry running. The housing and shaft are made of AISI 304 stainless steel, the impeller is made of PPO polymer, and the mechanical seal uses SiC/graphite/NBR.
The series includes the IBOPROM AUTO 1000 (1.0 kW, lifting height up to 37 m) and IBOPROM AUTO 1200 (1.2 kW, up to 47 m) models. Both models pump up to 100 l/min of technically clean or slightly contaminated water without abrasive particles such as sand.
- Type: high-pressure submersible pump with electronic automatic control
- Models: IBOPROM AUTO 1000 (37 m) and IBOPROM AUTO 1200 (47 m)
- Motor power: 1.0 / 1.2 kW (depending on the model)
- Maximum flow rate: 100 l/min
- Power supply: 230 V / 50 Hz
- Current consumption: 3.9 / 5.4 A (depending on the model)
- Rotational speed: 2800 RPM
- Discharge connection: 1"
- Impeller passage: 0.5 mm (technically clean / slightly contaminated water)
- Operating mode: continuous
- Protection rating / insulation class: IPX8 / B
- Maximum liquid temperature: 35°C
- Control: electronic automatic control (start/stop according to the valve, constant pressure)
- Protection: against dry running, thermal protection (in the winding)
- Power cable length: 10 m
- Materials: AISI 304 (housing, shaft), PPO polymer (impeller), SiC/graphite/NBR mechanical seal
Funding under the Mikroretencja 2026 program
The IBOPROM AUTO submersible pump may form part of a rainwater management system covered by the nationwide “Mikroretencja” (2026) program. The program is aimed at owners of single-family homes and supports retaining and using rainwater on their own property – including tanks, pumps, filters and drainage systems. Learn more about the Mikroretencja program on our website.
IBO – 24 months (2 years) manufacturer’s warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and water engineering equipment with quality certificates.
Frequently asked questions (FAQ) – IBOPROM AUTO IBO submersible pump
What is the IBOPROM AUTO submersible pump used for?
IBOPROM AUTO is a high-pressure submersible pump with electronic automatic control, designed for drawing and pumping raw water in households and for watering. It maintains constant pressure in the system and starts when the valve is opened. It pumps technically clean or slightly contaminated water.
How does the automatic control in the IBOPROM AUTO pump work?
When the outlet valve is closed, the pump switches off and enters standby mode while maintaining pressure in the system. When the valve is opened, the pump starts automatically. This allows it to operate similarly to a domestic pressure-boosting system.
How does IBOPROM AUTO differ from the INOX version?
IBOPROM AUTO controls operation using electronic automatic control that responds to the opening and closing of the valve while maintaining constant pressure. The INOX version has a float switch that controls the pump according to the water level. AUTO is better suited to supplying pressurized systems, while INOX is suitable for drawing and draining water according to the level.
What type of water can be pumped with an IBOPROM pump?
The pump is designed for technically clean or slightly contaminated water that does not contain abrasive particles such as sand. The impeller passage is 0.5 mm, so water containing suspended abrasive particles could damage the pump. The maximum liquid temperature is 35°C.
Which model should I choose – IBOPROM AUTO 1000 or 1200?
IBOPROM AUTO 1000 has a power rating of 1.0 kW and lifts water to a height of up to 37 m. IBOPROM AUTO 1200 has a power rating of 1.2 kW and a lifting height of up to 47 m. Both models achieve a flow rate of up to 100 l/min, while the more powerful model is chosen for greater lifting heights.
Where can I buy an IBOPROM AUTO IBO pump?
As the manufacturer, we do not sell directly. The IBO IBOPROM AUTO submersible pump can be purchased from our trade partners, installation wholesalers and authorized online distributors. The model should be selected according to the lifting height and the method of drawing water.
What is the warranty on the IBOPROM IBO pump?
IBO – 24 months (2 years) manufacturer’s warranty. Warranty and post-warranty service is provided by Dambat. For questions about choosing a model, it is best to contact an authorized distributor.