Description
IBO-GL-TZ-125-50 well head
The IBO well head is a cover that hermetically seals the casing pipe of a deep well and provides a passage for the discharge pipe and the pump's power cable. A gasket that clamps onto the casing pipe protects the well from contaminants and surface water. The series includes two installation variants – TW and TZ – in several sizes suited to standard well installations.
Who it's for
- Well drillers and drilling companies – watertight sealing of the borehole and secure suspension of the pump from the metal eyelet.
- Submersible pump installers – routing the PE pipe and cable through a single sealed port.
- Owners of domestic wells – protecting water intakes from surface contamination.
- Service and maintenance teams – easier access to the pump and periodic inspection of the well installation.
Applications
The TZ well head is used to seal the casing pipes of deep wells where a pump is suspended on a line. The discharge pipe and power cable pass through the head, while the entire assembly remains watertight thanks to compression seals. This sealed well is protected from surface water, groundwater and foreign objects.
The watertight closure also helps make better use of the capacity of shallower wells: a vacuum can form between the head and the pump, helping draw water as the water level drops. The specific variant depends on the diameter of the casing pipe, the PE pipe diameter and the cable thickness. The IBO TW/TZ well head is available in versions suited to 110 and 125 mm casing pipes.
Features of the TZ well head series
The body, base and cover of the head are made of glass-fiber-reinforced polyamide (PA6+30GF), a material resistant to loads and conditions in a well. The seal is an EPDM ring, while the screws, nuts and pump suspension eyelet are made of galvanized steel. Each head has a cable gland for a watertight power cable feed-through and a PE pipe port sealed with a gasket.
The series differ in how they are installed. The TW series head is fitted inside the casing pipe, while the TZ series head is placed over the top of the casing pipe; the TZ version also comes with a PE quick connector and a threaded link for suspending the pump. Regardless of the variant, the metal eyelet allows you to safely suspend a submersible pump weighing up to 200 kg.
- Type: well head (sealing cover for casing pipe)
- Series: TZ (fits over the casing pipe)
- Housing material: glass fiber-reinforced polyamide (PA6+30GF)
- Seal: EPDM
- Pump suspension eye: galvanized steel
- Compatible casing pipe diameter: 125 mm
- PE pipe opening: 50 mm
- Cable opening diameter: 6–12 mm
- Max. load (pump suspension): 200 kg
IBO – 24-month (2-year) manufacturer’s warranty. Dambat provides warranty and post-warranty service.
Dambat – a trusted manufacturer of pumps and water engineering equipment with quality certifications.
Frequently asked questions (FAQ) – what is a TW / TZ well head used for?
What is a well head used for?
well head hermetically seals the casing pipe of a deep well and allows the discharge pipe and pump cable to pass through. It protects the well from surface water, groundwater and contaminants, while the metal eye allows the pump, weighing up to 200 kg, to be suspended safely.
What is the difference between the TW and TZ series?
The TW series well head is installed inside the casing pipe, while the TZ series well head fits over the top of the casing pipe. The TZ version also has a PE quick connector and a screw-link for suspending the pump. The choice depends on how the casing pipe is finished in the well.
How do I choose the right well head size?
Match three parameters: the casing pipe diameter (110 or 125 mm), the diameter of the PE pipe leading to the pump (25, 32, 40 or 50 mm), and the power cable diameter (6–10 mm for the TW series, 6–12 mm for the TZ series). The model designation, e.g. IBO-GL-TW-125-40, indicates the series, well head diameter and PE pipe diameter, respectively. W If you have any questions, please contact our technical department.
How do I install a well head?
Connect the PE pipe to the pump’s discharge port, pass it through the well head, and feed the cable through the cable gland. Suspend the pump from a line attached to the eye or link on the well head, then fit the well head inside or on top of the casing pipe and tighten the screws. Installation should be carried out by a qualified installer with the power disconnected.
Is the well head covered by the manufacturer’s warranty?
IBO – 24-month (2-year) manufacturer’s warranty. Dambat provides warranty and post-warranty service.
Where can I buy an IBO TW / TZ well head?
As a manufacturer, we do not sell directly. IBO well heads from the TW and TZ series are available from our retail partners, plumbing supply wholesalers and authorized online distributors.
- Dimensions H/W/L [mm]: 160/205/205
IBO-GL-TZ-125-50 well head
The IBO well head is a cover that hermetically seals the casing pipe of a deep well and provides a passage for the discharge pipe and the pump's power cable. A gasket that clamps onto the casing pipe protects the well from contaminants and surface water. The series includes two installation variants – TW and TZ – in several sizes suited to standard well installations.
Who it's for
- Well drillers and drilling companies – watertight sealing of the borehole and secure suspension of the pump from the metal eyelet.
- Submersible pump installers – routing the PE pipe and cable through a single sealed port.
- Owners of domestic wells – protecting water intakes from surface contamination.
- Service and maintenance teams – easier access to the pump and periodic inspection of the well installation.
Applications
The TZ well head is used to seal the casing pipes of deep wells where a pump is suspended on a line. The discharge pipe and power cable pass through the head, while the entire assembly remains watertight thanks to compression seals. This sealed well is protected from surface water, groundwater and foreign objects.
The watertight closure also helps make better use of the capacity of shallower wells: a vacuum can form between the head and the pump, helping draw water as the water level drops. The specific variant depends on the diameter of the casing pipe, the PE pipe diameter and the cable thickness. The IBO TW/TZ well head is available in versions suited to 110 and 125 mm casing pipes.
Features of the TZ well head series
The body, base and cover of the head are made of glass-fiber-reinforced polyamide (PA6+30GF), a material resistant to loads and conditions in a well. The seal is an EPDM ring, while the screws, nuts and pump suspension eyelet are made of galvanized steel. Each head has a cable gland for a watertight power cable feed-through and a PE pipe port sealed with a gasket.
The series differ in how they are installed. The TW series head is fitted inside the casing pipe, while the TZ series head is placed over the top of the casing pipe; the TZ version also comes with a PE quick connector and a threaded link for suspending the pump. Regardless of the variant, the metal eyelet allows you to safely suspend a submersible pump weighing up to 200 kg.
- Type: well head (sealing cover for casing pipe)
- Series: TZ (fits over the casing pipe)
- Housing material: glass fiber-reinforced polyamide (PA6+30GF)
- Seal: EPDM
- Pump suspension eye: galvanized steel
- Compatible casing pipe diameter: 125 mm
- PE pipe opening: 50 mm
- Cable opening diameter: 6–12 mm
- Max. load (pump suspension): 200 kg
IBO – 24-month (2-year) manufacturer’s warranty. Dambat provides warranty and post-warranty service.
Dambat – a trusted manufacturer of pumps and water engineering equipment with quality certifications.
Frequently asked questions (FAQ) – what is a TW / TZ well head used for?
What is a well head used for?
well head hermetically seals the casing pipe of a deep well and allows the discharge pipe and pump cable to pass through. It protects the well from surface water, groundwater and contaminants, while the metal eye allows the pump, weighing up to 200 kg, to be suspended safely.
What is the difference between the TW and TZ series?
The TW series well head is installed inside the casing pipe, while the TZ series well head fits over the top of the casing pipe. The TZ version also has a PE quick connector and a screw-link for suspending the pump. The choice depends on how the casing pipe is finished in the well.
How do I choose the right well head size?
Match three parameters: the casing pipe diameter (110 or 125 mm), the diameter of the PE pipe leading to the pump (25, 32, 40 or 50 mm), and the power cable diameter (6–10 mm for the TW series, 6–12 mm for the TZ series). The model designation, e.g. IBO-GL-TW-125-40, indicates the series, well head diameter and PE pipe diameter, respectively. W If you have any questions, please contact our technical department.
How do I install a well head?
Connect the PE pipe to the pump’s discharge port, pass it through the well head, and feed the cable through the cable gland. Suspend the pump from a line attached to the eye or link on the well head, then fit the well head inside or on top of the casing pipe and tighten the screws. Installation should be carried out by a qualified installer with the power disconnected.
Is the well head covered by the manufacturer’s warranty?
IBO – 24-month (2-year) manufacturer’s warranty. Dambat provides warranty and post-warranty service.
Where can I buy an IBO TW / TZ well head?
As a manufacturer, we do not sell directly. IBO well heads from the TW and TZ series are available from our retail partners, plumbing supply wholesalers and authorized online distributors.



