Description
well head IBO-GL-TW-125-40
The IBO well head is a cover that hermetically seals the casing pipe of a deep well and provides a passage for the discharge pipe and pump power cable. A gasket that clamps onto the casing pipe protects the well from contaminants and surface water. The series includes two installation options - TW and TZ - in several sizes to fit standard well installations.
Who it's for
- Well drillers and drilling companies - watertight sealing of the borehole and secure suspension of the pump from the metal eye.
- Submersible pump installers - routing the PE pipe and cable through a single sealed passage.
- Owners of domestic wells - protecting water intakes from surface contaminants.
- Service and maintenance crews - easier access to the pump and periodic inspection of the well installation.
Applications
The well head TW is used to close the casing pipes of deep wells where a pump is suspended on a line. The discharge pipe and power cable pass through the head, while compression seals keep the assembly watertight. This sealed well is protected from surface water, groundwater and foreign objects.
The watertight closure also helps make better use of the capacity of shallower wells - a vacuum can form between the head and the pump, helping draw water when the water level falls. The choice of a specific version depends on the diameter of the casing pipe, the diameter of the PE pipe and the cable thickness. well head IBO TW/TZ is available in versions designed for 110 and 125 mm casing pipes.
Features of the TW well head series
The head body, base and cover are made of glass fiber-reinforced polyamide (PA6+30GF), a material resistant to loads and conditions inside a well. The seal is an EPDM ring, while the screws, nuts and pump suspension eye are made of galvanized steel. Each head has a cable gland to ensure a watertight passage for the power cable, as well as a port for the PE pipe, sealed with a gasket.
The series differ in their installation method. The TW series head is fitted inside the casing pipe, while the TZ series head is placed over the top of the casing pipe; the TZ version also comes with a PE quick connector and a threaded link for suspending the pump. Regardless of the version, the metal eye allows you to safely suspend a submersible pump weighing up to 200 kg.
- Type: well head (sealing cover for casing pipe)
- Series: TW (installed inside the casing pipe)
- Housing material: glass-fiber-reinforced polyamide (PA6+30GF)
- Seal: EPDM
- Pump suspension eye: galvanized steel
- Compatible casing pipe diameter: 125 mm
- PE pipe pass-through: 40 mm
- Cable feed-through diameter: 6–10
- Max. load (pump suspension): 200 kg
IBO – 24-month (2-year) manufacturer’s warranty. Dambat provides warranty and post-warranty service.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – what is a TW / TZ well head used for?
What is a well head used for?
well head hermetically seals the casing pipe of a deep well and provides a passage for the discharge pipe and pump cable. It protects the well from surface water, groundwater, and contaminants, while the metal eye allows you to safely suspend a pump weighing up to 200 kg.
What is the difference between the TW and TZ series?
The TW series well head is installed inside the casing pipe, while the TZ series well head fits over the top of the casing pipe. The TZ version also has a PE quick connector and a screw-link for suspending the pump. The choice depends on how the casing pipe is finished at the well.
How do I choose the right well head size?
You need to match three parameters: the casing pipe diameter (110 or 125 mm), the diameter of the PE pipe leading to the pump (25, 32, 40, or 50 mm), and the diameter of the power cable (6–10 mm for the TW series, 6–12 mm for the TZ series). The model designation, e.g. IBO-GL-TW-125-40, indicates the series, well head diameter, and PE pipe diameter, in that order. W If you have any questions, please contact our technical department.
How do I install a well head?
Connect the PE pipe to the pump’s discharge port and feed it through the well head, then feed the cable through the cable gland. Suspend the pump from a rope attached to the eye or link on the well head. Then position the well head in or on the casing pipe and tighten the screws. Installation should be carried out by a qualified installer with the power disconnected.
Does the well head come with a manufacturer’s warranty?
IBO – 24-month (2-year) manufacturer’s warranty. Dambat provides warranty and post-warranty service.
Where can I buy an IBO TW / TZ well head?
As a manufacturer, we do not sell directly. IBO well heads from the TW and TZ series are available from our business partners, plumbing wholesalers, and authorized online distributors.
- Dimensions H/W/L [mm]: 130/145/145
well head IBO-GL-TW-125-40
The IBO well head is a cover that hermetically seals the casing pipe of a deep well and provides a passage for the discharge pipe and pump power cable. A gasket that clamps onto the casing pipe protects the well from contaminants and surface water. The series includes two installation options - TW and TZ - in several sizes to fit standard well installations.
Who it's for
- Well drillers and drilling companies - watertight sealing of the borehole and secure suspension of the pump from the metal eye.
- Submersible pump installers - routing the PE pipe and cable through a single sealed passage.
- Owners of domestic wells - protecting water intakes from surface contaminants.
- Service and maintenance crews - easier access to the pump and periodic inspection of the well installation.
Applications
The well head TW is used to close the casing pipes of deep wells where a pump is suspended on a line. The discharge pipe and power cable pass through the head, while compression seals keep the assembly watertight. This sealed well is protected from surface water, groundwater and foreign objects.
The watertight closure also helps make better use of the capacity of shallower wells - a vacuum can form between the head and the pump, helping draw water when the water level falls. The choice of a specific version depends on the diameter of the casing pipe, the diameter of the PE pipe and the cable thickness. well head IBO TW/TZ is available in versions designed for 110 and 125 mm casing pipes.
Features of the TW well head series
The head body, base and cover are made of glass fiber-reinforced polyamide (PA6+30GF), a material resistant to loads and conditions inside a well. The seal is an EPDM ring, while the screws, nuts and pump suspension eye are made of galvanized steel. Each head has a cable gland to ensure a watertight passage for the power cable, as well as a port for the PE pipe, sealed with a gasket.
The series differ in their installation method. The TW series head is fitted inside the casing pipe, while the TZ series head is placed over the top of the casing pipe; the TZ version also comes with a PE quick connector and a threaded link for suspending the pump. Regardless of the version, the metal eye allows you to safely suspend a submersible pump weighing up to 200 kg.
- Type: well head (sealing cover for casing pipe)
- Series: TW (installed inside the casing pipe)
- Housing material: glass-fiber-reinforced polyamide (PA6+30GF)
- Seal: EPDM
- Pump suspension eye: galvanized steel
- Compatible casing pipe diameter: 125 mm
- PE pipe pass-through: 40 mm
- Cable feed-through diameter: 6–10
- Max. load (pump suspension): 200 kg
IBO – 24-month (2-year) manufacturer’s warranty. Dambat provides warranty and post-warranty service.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – what is a TW / TZ well head used for?
What is a well head used for?
well head hermetically seals the casing pipe of a deep well and provides a passage for the discharge pipe and pump cable. It protects the well from surface water, groundwater, and contaminants, while the metal eye allows you to safely suspend a pump weighing up to 200 kg.
What is the difference between the TW and TZ series?
The TW series well head is installed inside the casing pipe, while the TZ series well head fits over the top of the casing pipe. The TZ version also has a PE quick connector and a screw-link for suspending the pump. The choice depends on how the casing pipe is finished at the well.
How do I choose the right well head size?
You need to match three parameters: the casing pipe diameter (110 or 125 mm), the diameter of the PE pipe leading to the pump (25, 32, 40, or 50 mm), and the diameter of the power cable (6–10 mm for the TW series, 6–12 mm for the TZ series). The model designation, e.g. IBO-GL-TW-125-40, indicates the series, well head diameter, and PE pipe diameter, in that order. W If you have any questions, please contact our technical department.
How do I install a well head?
Connect the PE pipe to the pump’s discharge port and feed it through the well head, then feed the cable through the cable gland. Suspend the pump from a rope attached to the eye or link on the well head. Then position the well head in or on the casing pipe and tighten the screws. Installation should be carried out by a qualified installer with the power disconnected.
Does the well head come with a manufacturer’s warranty?
IBO – 24-month (2-year) manufacturer’s warranty. Dambat provides warranty and post-warranty service.
Where can I buy an IBO TW / TZ well head?
As a manufacturer, we do not sell directly. IBO well heads from the TW and TZ series are available from our business partners, plumbing wholesalers, and authorized online distributors.



