HP INOX AUTO - compact pressure boosting pump
HP INOX AUTO is a compact stainless steel pump, equipped with a built-in frequency converter, designed to supply clean water to households from its own intakes and to increase the pressure from the water supply network. Smooth speed regulation of the permanent magnet motor maintains constant pressure at all draw-off points, ensures smooth starts and lower energy consumption than a classic hydrophore set. With a 550 W motor, the pump achieves a capacity of up to 92 l/min.
For whom
- Owners of single-family houses - constant water pressure throughout the entire installation, even when drawn from several points at the same time.
- Residents of new housing estates and network ends - effective raising of too low water pressure.
- Installers – simple two-button configuration without the need to select separate automation, clear parameters and manufacturer support.
- Users of plots and gardens – Power supply irrigation with water from a well or rainwater tank.
- Investing in durability - AISI 304 stainless steel housing resistant to the conditions of technical rooms.
Application
The HP INOX AUTO pump plays the role of the heart of the home water installation: it draws raw water from your own well or raises too low pressure from the water supply network, ensuring a constant flow at each draw-off valve. This is a solution for modernizing the water installation at home wherever a traditional water pump does not maintain equal pressure.
The device will also handle garden irrigation and watering with rainwater collected from the tank, as well as supplying smaller facilities with water. The HP INOX AUTO 230 V pressure boosting pump works with typical installations found in Polish single-family houses.
Features of HP INOX AUTO
HP INOX AUTO is a pump with a built-in frequency converter that smoothly regulates the rotational speed of the permanent magnet motor and maintains the set pressure regardless of the number of open intake points. Soft start reduces mechanical loads and wear of the engine and hydraulic parts, and operation at reduced speeds translates into quiet operation and lower energy consumption compared to classic hydrophore sets.
Configuration comes down to setting the working pressure using two buttons + and –; the current parameters are shown on the inverter's LED display. The controller provides a set of protections: protection against dry running (provided by the inverter, without external probes), motor overload, too high and too low voltage and water hammer.
The housing is made of AISI 304 stainless steel, and the motor shaft and rotor are also made of this material. The hydraulic part is based on a PPO polymer impeller and diffuser. The ceramic/graphite mechanical seal and the IP54 protection level ensure durability in home installations and commercial premises.
- Max Lift: 45 m
- Max capacity: 92 l/min
- Suction capacity: 8 m
- Power: 550 W
- Current: 3.6 / 5.6 A
- Engine speed: 0–4000 rpm
- Frequency Range: 30–50 Hz
- Connections: 1" × 1"
- Degree of protection: IP54
- Working mode: continuous
- Max. liquid temperature: 60°C
IBO – 24 months (2 years) manufacturer's warranty.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – what is the HP INOX AUTO pump used for?
What is the HP INOX AUTO pump used for?
HP INOX AUTO supplies households with raw water from its own well and relieves too low pressure from the water supply network. Thanks to the built-in frequency converter, it maintains constant pressure on all intake valves.
How does a pump with a frequency converter differ from a classic hydrophore set?
Instead of cyclically turning the pump on and off, the converter smoothly regulates the engine speed, adapting it to the current water consumption. The result is constant pressure, gentle starts, quieter operation and lower power consumption than in a system with a traditional hydrophore.
Is HP INOX AUTO suitable for watering the garden with rainwater from the tank?
Yes, the pump can draw water from a rainwater tank or well and power the irrigation system. When drawing from an open source, a non-return valve should be installed on the suction pipe to prevent automatic emptying of the pipeline - appropriate elements can be found in accessories for surface and hydrophore pumps.
How to set the pump working pressure?
Configuration does not require a specialist visit - just use two + and - buttons to set the desired working pressure, which the pump will then maintain automatically. The current parameters are shown on the inverter's LED display.
Where can you buy the HP INOX AUTO pump?
As a manufacturer, we do not sell directly. The HP INOX AUTO pump is available from our trading partners, installation wholesalers and authorized online distributors.
What warranty is covered by the HP INOX AUTO pump?
The HP INOX AUTO pump by IBO is covered by a 24-month (2-year) manufacturer's warranty. As Dambat, we also provide technical support and access to documentation throughout the entire life of the device.
