Description
GBV 500 vertical diaphragm tank IBO ITALY
GBV vertical diaphragm tank IBO ITALY is a pressure device designed to stabilize pressure and increase the active volume in water supply installations. As a manufacturer, we design the GBV with a carbon steel body and an EPDM membrane to reduce the frequency of pump activation and extend the life of the entire hydrophore system.
For whom
- Water installation companies – we provide a proven component for the construction of efficient hydrophore sets, with full technical documentation and Dambat support.
- Engineers and installation designers – we provide a device that meets the requirements of the Pressure Equipment Directive 2014/68/EU, facilitating the selection of system operating parameters.
- Agricultural and horticultural farms – we enable stable Power supply into water from own intakes, reducing the number of pump starts and energy consumption.
- Industrial enterprises – we ensure that constant pressure parameters are maintained in utility water supply lines.
- Wholesale and technical stores – we offer a product from the line IBO ITALY expanding the offer in the segment of high-capacity expansion tanks.
Application
- Cooperation with surface and submersible pumps in complete hydrophore sets.
- Power supply into water from own intakes in single- and multi-family houses, farms and enterprises.
- Stabilizing the pressure in water supply installations and increasing the active volume of water supply installations.
- Collection and separation of clean water in systems without chemical liquids, oils or petroleum substances.
The GBV vertical diaphragm tank is intended only for water media without solid fractions - detailed operating conditions are specified in the manufacturer's documentation.
Features, description and technical data
The GBV expansion tank belongs to the line IBO ITALY manufacturer Dambat - a series of vertical expansion vessels with capacities from 24 l to 10,000 l, intended for water supply installations requiring a large active working volume. EPDM diaphragms used in devices IBO ITALY are produced in an Italian factory, which confirms the qualitative nature of this line.
The tank body is made of thick carbon steel with a special anti-corrosion coating on the outside. Inside the vessel there is a replaceable EPDM membrane that completely separates the collected water from the steel jacket of the device. The space between the membrane and the housing is filled with compressed air with a set initial pressure of 4.0 bar (±10%). In the upper part of the tank, under the cover, there is a sealed valve (valve) enabling control and regulation of air pressure.
GBV expansion tank IBO ITALY meets the requirements of the Pressure Equipment Directive 2014/68/EU. The use of a vessel in a hydrophore set allows you to limit the number of pump starts in a given period of time, which has a positive effect on the life of the entire installation.
Main technical parameters of the GBV tank:
- Installation Position: vertical
- diaphragm: YES
- Connection: 1 / 1¼"
- Pre-pressure: 4.0 bar (±10%)
- Working pressure: 10.0 bar
- Maximum Test Pressure: 15.0 bar
- Working Temperature: from -10°C to 100°C
- Pressure gauge: YES
MATERIALS
- Body: carbon steel covered with anti-corrosion varnish
- diaphragm: EPDM
Frequently asked questions (FAQ) – GBV expansion tank IBO ITALY
What is the GBV expansion tank used for? IBO ITALY?
GBV expansion tank from the brand IBO ITALY used to stabilize pressure and increase the active working volume in water supply installations. In combination with a surface or submersible pump, it creates a complete hydrophore set, limiting the frequency of pump activations and extending the life of the entire system.
What is the difference between lines IBO ITALY from the standard IBO line?
IBO ITALY is a line of the Dambat manufacturer associated with Italian component manufacturers - among others, the EPDM diaphragms used in tanks of this series are produced in an Italian factory. Line IBO ITALY includes vertical expansion tanks with large capacities (from 150 l to 10,000 l), intended for more demanding water supply installations. The standard IBO line includes a wide range of pumps and water devices covered by a 24-month manufacturer's warranty.
Where can you buy a GBV expansion tank? IBO ITALY?
As a manufacturer, we do not sell directly online. GBV expansion tank IBO ITALY is available from our trading partners, installation wholesalers and authorized online distributors cooperating with the Dambat brand.
What is the warranty period and where can I order service?
GBV expansion tank IBO ITALY is covered 3-year manufacturer's warranty. The only authorized service is Dambat, which ensures efficient diagnosis and repair of the device in accordance with the manufacturer's requirements.
How to adjust the air pressure in the GBV tank?
A sealed valve (car valve) located in the upper part of the vessel, under the lid, is used to control and regulate the air pressure. Topping up or depressurizing can be done using a standard compressor. The recommended initial pressure is 4.0 bar (±10%) - this value should always be adjusted to the operating parameters of the installation.
Is the GBV tank suitable for water with sand or other impurities?
NO. GBV expansion tank IBO ITALY it is not adapted to work with media containing abrasive substances (e.g. sand, clay) or chemical, oil or petroleum substances. The presence of solid fractions in the medium may cause abrasion of the EPDM membrane and permanent damage to the device. Before connecting the tank, we recommend using pre-filters in the installation.
What pumps does the GBV expansion tank work with?
GBV expansion tank IBO ITALY works with both surface and submersible pumps - provided that their operating parameters (pressure, flow) do not exceed the permissible values given in the technical documentation of the vessel. Dambat recommends selecting the pump in accordance with the designed characteristics of the entire hydrophore set.
- diaphragm: YES,
- Installation Position: Vertical,
- Connection: 1¼",
- Pressure gauge: YES,
- Maximum Tested Pressure: 15.0 bar,
- Pre-pressure: 4.0 ±10%,
- Working pressure: 10.0 bar,
- Operating temperature: from -10°C to 100°C,
- Dimensions: Ø75/155 cm,
- Weight: 64.2 kg,
MATERIALS
• Body: Carbon steel covered with varnish,
• Diaphragm: EPDM.
GBV 500 vertical diaphragm tank IBO ITALY
GBV vertical diaphragm tank IBO ITALY is a pressure device designed to stabilize pressure and increase the active volume in water supply installations. As a manufacturer, we design the GBV with a carbon steel body and an EPDM membrane to reduce the frequency of pump activation and extend the life of the entire hydrophore system.
For whom
- Water installation companies – we provide a proven component for the construction of efficient hydrophore sets, with full technical documentation and Dambat support.
- Engineers and installation designers – we provide a device that meets the requirements of the Pressure Equipment Directive 2014/68/EU, facilitating the selection of system operating parameters.
- Agricultural and horticultural farms – we enable stable Power supply into water from own intakes, reducing the number of pump starts and energy consumption.
- Industrial enterprises – we ensure that constant pressure parameters are maintained in utility water supply lines.
- Wholesale and technical stores – we offer a product from the line IBO ITALY expanding the offer in the segment of high-capacity expansion tanks.
Application
- Cooperation with surface and submersible pumps in complete hydrophore sets.
- Power supply into water from own intakes in single- and multi-family houses, farms and enterprises.
- Stabilizing the pressure in water supply installations and increasing the active volume of water supply installations.
- Collection and separation of clean water in systems without chemical liquids, oils or petroleum substances.
The GBV vertical diaphragm tank is intended only for water media without solid fractions - detailed operating conditions are specified in the manufacturer's documentation.
Features, description and technical data
The GBV expansion tank belongs to the line IBO ITALY manufacturer Dambat - a series of vertical expansion vessels with capacities from 24 l to 10,000 l, intended for water supply installations requiring a large active working volume. EPDM diaphragms used in devices IBO ITALY are produced in an Italian factory, which confirms the qualitative nature of this line.
The tank body is made of thick carbon steel with a special anti-corrosion coating on the outside. Inside the vessel there is a replaceable EPDM membrane that completely separates the collected water from the steel jacket of the device. The space between the membrane and the housing is filled with compressed air with a set initial pressure of 4.0 bar (±10%). In the upper part of the tank, under the cover, there is a sealed valve (valve) enabling control and regulation of air pressure.
GBV expansion tank IBO ITALY meets the requirements of the Pressure Equipment Directive 2014/68/EU. The use of a vessel in a hydrophore set allows you to limit the number of pump starts in a given period of time, which has a positive effect on the life of the entire installation.
Main technical parameters of the GBV tank:
- Installation Position: vertical
- diaphragm: YES
- Connection: 1 / 1¼"
- Pre-pressure: 4.0 bar (±10%)
- Working pressure: 10.0 bar
- Maximum Test Pressure: 15.0 bar
- Working Temperature: from -10°C to 100°C
- Pressure gauge: YES
MATERIALS
- Body: carbon steel covered with anti-corrosion varnish
- diaphragm: EPDM
Frequently asked questions (FAQ) – GBV expansion tank IBO ITALY
What is the GBV expansion tank used for? IBO ITALY?
GBV expansion tank from the brand IBO ITALY used to stabilize pressure and increase the active working volume in water supply installations. In combination with a surface or submersible pump, it creates a complete hydrophore set, limiting the frequency of pump activations and extending the life of the entire system.
What is the difference between lines IBO ITALY from the standard IBO line?
IBO ITALY is a line of the Dambat manufacturer associated with Italian component manufacturers - among others, the EPDM diaphragms used in tanks of this series are produced in an Italian factory. Line IBO ITALY includes vertical expansion tanks with large capacities (from 150 l to 10,000 l), intended for more demanding water supply installations. The standard IBO line includes a wide range of pumps and water devices covered by a 24-month manufacturer's warranty.
Where can you buy a GBV expansion tank? IBO ITALY?
As a manufacturer, we do not sell directly online. GBV expansion tank IBO ITALY is available from our trading partners, installation wholesalers and authorized online distributors cooperating with the Dambat brand.
What is the warranty period and where can I order service?
GBV expansion tank IBO ITALY is covered 3-year manufacturer's warranty. The only authorized service is Dambat, which ensures efficient diagnosis and repair of the device in accordance with the manufacturer's requirements.
How to adjust the air pressure in the GBV tank?
A sealed valve (car valve) located in the upper part of the vessel, under the lid, is used to control and regulate the air pressure. Topping up or depressurizing can be done using a standard compressor. The recommended initial pressure is 4.0 bar (±10%) - this value should always be adjusted to the operating parameters of the installation.
Is the GBV tank suitable for water with sand or other impurities?
NO. GBV expansion tank IBO ITALY it is not adapted to work with media containing abrasive substances (e.g. sand, clay) or chemical, oil or petroleum substances. The presence of solid fractions in the medium may cause abrasion of the EPDM membrane and permanent damage to the device. Before connecting the tank, we recommend using pre-filters in the installation.
What pumps does the GBV expansion tank work with?
GBV expansion tank IBO ITALY works with both surface and submersible pumps - provided that their operating parameters (pressure, flow) do not exceed the permissible values given in the technical documentation of the vessel. Dambat recommends selecting the pump in accordance with the designed characteristics of the entire hydrophore set.
