FLOW LOW 0.25 INOX - submersible pump to low water level
submersible pump FLOW LOW 0.25 INOX by IBO is a device with a power of 250 W, designed for pumping clean and slightly polluted water in places that require pumping the water to a low level. The AISI 316 stainless steel motor housing increases corrosion resistance, and the post-type float switch allows the pump to operate lower than traditional solutions. float switch ball.
For whom
-
House and plot owners – columnar Float allows water to be pumped out almost to a level of 5 cm, lower than in the case of a standard ball float.
-
Installation and service companies – AISI 316 stainless steel motor housing increases corrosion resistance during frequent use.
-
Agricultural and breeding farms – the pump is suitable for pumping water from ponds, reservoirs and shallow ring wells.
-
Wholesale and technical stores – the model complements the offer with a variant for pumping water to a low level, less common among simpler submersible pumps.
Application
submersible pump FLOW LOW 0.25 INOX is intended for pumping clean and slightly polluted water, not containing grinding elements such as sand, in places that require pumping the water to a low level. The pump is used to drain flooded rooms, swimming pools and wells, as well as to pump water from ponds, rivers, reservoirs and shallow ring wells.
The device operates in a vertical position, fully immersed, with a maximum temperature of the pumped liquid of up to 35°C. The permissible size of solid impurities is 5 mm. submersible pump FLOW LOW 0.25 INOX 230 V works well in installations where standard Float ball would leave too much unpumped water.
Features of the FLOW LOW 0.25 INOX pump
The FLOW LOW 0.25 INOX pump is made of AISI 316 stainless steel motor housing, and the shaft and rotor are made of AISI 304 stainless steel. The PPO polymer impeller and double mechanical stuffing box in the SiC/graphite/NBR system ensure resistance to typical contaminants found in raw and slightly polluted water.
The post-type float switch allows the pump to pump out water to a level of approximately 5 cm, lower than in solutions with a traditional float switch ball. Thermal protection built into the winding protects the motor against overheating, and the threaded discharge port allows you to connect the hose using a clamp or quick connector.
- Pump type: submersible pump for clean and slightly polluted water, for low water level
- Power supply: 230V (single phase)
- Engine power: 250 W
- Lifting height (Hmax): 9 m
- Efficiency (Qmax): 180 l/min
- Insulation class: B
- Degree of protection: IP68
- Working mode: continuous
- Working position: vertical
- Rotational speed: 2850 rpm
- Max. liquid temperature: 35°C
- Permissible amount of solid pollutants: 5mm
- Power cable length: 10 m, terminated with a plug
- Switch: post-type float switch, enabling emptying to approx. 5 cm
- Motor protection: thermal, built into the winding
- Discharge port: threaded, 1½"
- Materials: engine housing – AISI 316 stainless steel, shaft and rotor – AISI 304 stainless steel, rotor – PPO polymer, mechanical stuffing box – double, SiC/graphite/NBR
IBO – 24 months (2 years) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – submersible pump FLOW LOW 0.25 INOX
What type of water is the FLOW LOW 0.25 INOX pump intended for?
The FLOW LOW 0.25 INOX pump is intended for clean and slightly polluted water that does not contain grinding elements such as sand. The permissible size of solid impurities is 5 mm.
Up to what level can the pump pump out water?
Thanks to the post-type float switch, the pump can pump out water to a level of approximately 5 cm, which is lower than in the case of pumps with traditional float switch ball.
What is the difference between the FLOW LOW 0.25 INOX pump and standard IP series pumps?
The FLOW LOW 0.25 INOX pump has an AISI 316 stainless steel motor housing and a post-type float switch that allows the water to be pumped out to a level of approx. 5 cm. The standard models of the IP series have a technopolymer housing and Float ball type, which leaves a higher level of unpumped water, but tolerates larger solid impurities (up to 30 mm compared to 5 mm in FLOW LOW).
How to choose the FLOW LOW 0.25 INOX pump for your needs?
The model works well where it is important to pump water as close to the bottom as possible, e.g. in low wells or basins, while ensuring the absence of major solid contaminants in the water. If you have any doubts about the selection, we encourage you to: contact the technical department.
Where can you buy the FLOW LOW 0.25 INOX submersible pump?
Dambat does not sell directly. The FLOW LOW 0.25 INOX pump is available from trading partners, installation wholesalers and authorized online distributors.
What warranty conditions apply to the FLOW LOW 0.25 INOX pump?
IBO – 24 months (2 years) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
