DRAIN 750 – submersible pump for clean and slightly contaminated water
The IBO DRAIN 400 / DRAIN 750 submersible pump is equipped with a switch built into the housing in the form of a slider. It is designed for pumping clean and slightly contaminated water free of abrasive particles such as sand. Two operating modes – automatic and manual – make it possible to adapt the pump control method to the specific situation.
Who it is for
-
Homeowners and plot owners – the pump is suitable for draining flooded rooms, swimming pools, and sumps.
-
Installation and service companies – the switch built into the housing allows the pump to be used in narrow sumps and tanks.
-
Farms and livestock holdings – the pump draws water from ponds, rivers, and shallow ring wells.
-
Users who need manual control of operation – manual mode allows precise control over when the pump is switched off.
Applications
The DRAIN 400 / DRAIN 750 submersible pump is designed for pumping clean and slightly contaminated water free of abrasive particles such as sand. The pump is used for draining flooded rooms, swimming pools, and sumps.
It can also pump water from ponds, rivers, tanks, and shallow ring wells. The DRAIN 400 / DRAIN 750 230 V submersible pump operates in a vertical position, with a maximum pumped-liquid temperature of up to 35°C.
Features of the DRAIN 400 / DRAIN 750 pump
The pump has a technopolymer housing, which ensures low device weight. The shaft is made of AISI 304 stainless steel, the impeller is made of PPO polymer, and the mechanical seal operates in a SiC/graphite configuration.
The switch is built into the pump housing in the form of a slider, making the pump suitable for operation in narrow sumps and tanks where a traditional ball float would have too little space to move freely. The pump offers two operating modes – automatic, in which the slider sets the activation level, and manual, in which the device operates until it is switched off manually. Thermal protection built into the winding protects the motor against overheating.
- Pump type: submersible pump with a switch built into the housing (slider), automatic or manual mode
- Power supply: 230 V (single-phase)
- Insulation class: F
- Protection rating: IPX8
- Operating mode: continuous
- Operating position: vertical
- Rotational speed: 2850 rpm
- Maximum liquid temperature: 35°C
- Passage under the impeller: 35 mm
- Power cable length: 10 m
- Motor protection: thermal, built into the winding
- Connection: 1½" × 1"
- Materials: housing – technopolymer, shaft – AISI 304 stainless steel, impeller – PPO polymer, mechanical seal – SiC/graphite
IBO – 24-month (2-year) manufacturer’s warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – DRAIN 400 / DRAIN 750 submersible pump
What type of water is the DRAIN pump designed for?
The pump is designed for clean and slightly contaminated water free of abrasive particles such as sand. The maximum permissible particle size is 35 mm.
How narrow can a sump be for the DRAIN pump?
The switch built into the pump housing in the form of a slider allows operation in narrower sumps and tanks than pumps with a traditional ball float, which requires more space to move freely.
What is the difference between automatic and manual mode in the DRAIN pump?
In automatic mode, the pump starts when the water level reaches the height set with the slider and switches off when the level drops to approximately 11 cm. In manual mode, the pump operates continuously, and the user must switch it off manually when the water level reaches approximately 5 cm from the pump base.
DRAIN 400 or DRAIN 750 – which model is better for my needs?
The choice depends on the required pumping height and capacity – DRAIN 400 reaches a pumping height of up to 5 m, while DRAIN 750 reaches up to 8 m with higher capacity. If you have any doubts, we encourage you to contact the technical department.
Where can I buy a DRAIN submersible pump?
Dambat does not sell directly. DRAIN 400 and DRAIN 750 pumps are available from commercial partners, installation wholesalers, and authorized online distributors.
What warranty terms apply to the DRAIN pump?
IBO – 24-month (2-year) manufacturer’s warranty. Warranty and post-warranty service is provided by Dambat.
