Description
DIG IBO 2 (230 V, 1.5 kW) - electronic pressure switch
The IBO DIG IBO 2 is an electronic pump controller with a digital display, designed to automatically start and stop single-phase pumps rated up to 1.5 kW based on water pressure and flow rate in the pipeline. The controller supports two operating modes - pressure control in conjunction with a pressure tank, and interval mode (Timing) for controlling tank filling - and replaces the traditional mechanical pressure switch with an electronic system featuring extensive pump protection.
Who it's for
- Installers of surface pumps and pressure systems - The manual clearly explains the electrical and hydraulic installation procedure and includes a table for selecting the start-up pressure based on the installation height.
- Owners of homes supplied by a private water source - Automatic pump start and stop in response to water use, with clear panel indicators for low water and pressure sensor failure.
- Installations with periodic tank filling - Timing mode lets you control the pump at set intervals, e.g. in conjunction with a float switch that shuts off the supply to a tank or IBC container.
- Installations with fixed wiring - The version described, without a factory-fitted socket, makes it easier for a qualified electrician to connect the unit directly to the electrical circuit, without an intermediate wall socket.
Applications
- Automatic control of a surface pump working with a pressure tank in a domestic water system supplied from a private water source, upstream of the water treatment stage.
- Maintaining pressure in the system by starting the pump when water is drawn and stopping it when the outlet is closed.
- Controlling tank or IBC container filling in interval mode (Timing), e.g. in conjunction with a float switch that shuts off the water supply.
The DIG IBO 2 electronic pressure switch is designed exclusively for use with clean water. It is installed on the discharge side of a working pump that has been tested beforehand, upstream of the outlet (tap). The manufacturer recommends installing a check valve directly at the water source and ensuring that the water column above the controller is lower than the set start-up pressure.
Features, description, and technical data
The IBO DIG IBO 2 detects water pressure and flow rate in the pipeline, automatically starting and stopping the pump based on these readings. The initial pressure (start-up pressure) and stop pressure (shut-off pressure) are set on the panel using the "+" and "-" buttons and the Set button. Current parameters are shown on the digital display in the selected unit (bar, psi, or A). The panel also features LEDs indicating power, current operating mode, low water, and pump operation. The manual start button lets you restart the pump after it has stopped.
The controller offers two operating modes, selected from the panel: "Pressure Control" mode, which requires a pressure tank in the installation, and "Timing" mode, in which the pump runs cyclically at a set time interval (available intervals: 1, 3, 6, 12, or 24 hours) - a useful option, for example, when filling a tank or an IBC container using a float switch to shut off the water supply.
The DIG IBO 2's protective functions include: dry-run protection with an adjustable pressure threshold and shut-off delay, automatic restart once the water shortage has been resolved (with a 1-hour interval between attempts), automatic restart after a power failure and restoration of power, pump jam protection (automatic test run if the pump remains inactive for more than 48 hours), adjustable overcurrent protection (0-16 A), and alerts for a pressure sensor fault, continuous pump operation exceeding 6 hours without switching off, and excessively frequent start/stop cycles - the corresponding messages ("o5", "LL", "CC", "oCP", "oLP") are displayed directly on the device panel.
The device is powered by a single-phase 220-240 V (50/60 Hz) supply and supports pumps with a maximum operating current of up to 12 A and power of up to 1.5 kW. The start pressure setting range is 0.5-7.5 bar, and the stop pressure range is 0.8-9.6 bar, with a maximum permissible system pressure of 10 bar (1.0 MPa) - if the installation pressure is higher, the manufacturer requires a pressure reducer to be installed upstream of the controller. The IP65-rated housing, ambient temperature range up to 60°C, and pumped water temperature up to 40°C allow installation in typical utility rooms, provided the device is not exposed to rain, direct sunlight, or strong magnetic fields. The electrical installation must be connected to a circuit protected by a residual current device with a rated trip current no higher than 30 mA and should be carried out by a person with the appropriate electrical qualifications. The version described is supplied without a factory-fitted power outlet - the manufacturer also offers a version with an outlet.
- Device type: electronic pressure switch (pump controller)
- Brand: IBO
- Model: DIG IBO 2
- Version: without a factory-fitted power outlet (a version with an outlet is also available)
- Power supply: 1~220-240 V, 50/60 Hz
- Maximum current: 12 A (adjustable overload protection 0-16 A)
- Maximum power of supported pump: 1.5 kW
- Switch-on pressure setting range: 0,5-7,5 bar
- Switch-off pressure setting range: 0,8-9,6 bar
- Maximum system pressure: 10 bar (1.0 MPa)
- Protection rating: IP65
- Maximum pumped water temperature: 40°C
- Maximum ambient temperature: 60°C
- Connection: 1/4"
- Operating modes: Pressure Control (with a pressure tank), Timing (interval: 1/3/6/12/24 h)
- Protections: dry-run protection, overload protection, pump jamming protection, protection against excessively frequent switching cycles, pressure sensor fault indication
Content prepared based on general information. Contact us for details.
IBO – 24 months (2 years) manufacturer’s warranty.
Dambat – a trusted manufacturer of pumps and water engineering equipment with quality certifications.
Frequently asked questions (FAQ) – what is the DIG IBO 2 switch used for?
What is the IBO DIG IBO 2 pressure switch used for?
The DIG IBO 2 is an electronic pump controller that automatically switches on a surface pump when water is drawn and switches it off when the flow stops, based on the pressure and water flow in the pipeline. It operates in pressure control mode with a pressure tank or in Timing interval mode.
What operating modes does the DIG IBO 2 controller offer?
Two modes are available: "Pressure Control", which requires a pressure tank in the system, and "Timing", in which the pump runs cyclically at a set time interval (1, 3, 6, 12, or 24 hours) - useful, for example, for filling a tank with a float valve that shuts off the water supply.
How does the DIG IBO 2 differ from the DIG-IBO 1 model available from Dambat?
These are two separate models with different specifications. Before choosing a specific device for your system, compare their product specifications, particularly the enclosure protection rating and the permitted temperature of the pumped water.
How do I install the DIG IBO 2 switch in the system?
Install the controller on the discharge side of a previously tested pump, before the outlet (tap), with a check valve fitted at the water source. The electrical installation, based on a circuit protected by a residual current device, should be carried out by a qualified person.
Where can I buy the DIG IBO 2 switch manufactured by Dambat?
Dambat does not sell directly. The DIG IBO 2 switch is available from commercial partners, plumbing wholesalers, and authorized online distributors.
What are the warranty terms for the DIG IBO 2 switch?
IBO – 24 months (2 years) manufacturer’s warranty. Dambat provides warranty and post-warranty service.
- Power [kW]: 1.5
- Power supply [V]: 1~230 V
- Frequency [Hz]: 50
- Current [A]: 12.0
- Protection rating: IP65
- Dimensions H/W/L [mm]: 133/90/80
- Height (mm): 133
- Width (mm): 90
- Length (mm): 80
- Max. liquid temperature: 40
- Max. ambient temperature [°C]: 60
- Maximum tested pressure: 10.0
- Product weight [kg]: 0.8
- Connection [DN/inches]: ¼
Download: GARAN_Prawny_obowiazek_zapewnienia_zgodnosci_towaru_z_umowa.pdf
Download: DIG_IBO_2_karta.pdf
Download: Karta_DIG_IBO_2_DE.pdf
Download: Karta_DIG_IBO_2_EN.pdf
DIG IBO 2 (230 V, 1.5 kW) - electronic pressure switch
The IBO DIG IBO 2 is an electronic pump controller with a digital display, designed to automatically start and stop single-phase pumps rated up to 1.5 kW based on water pressure and flow rate in the pipeline. The controller supports two operating modes - pressure control in conjunction with a pressure tank, and interval mode (Timing) for controlling tank filling - and replaces the traditional mechanical pressure switch with an electronic system featuring extensive pump protection.
Who it's for
- Installers of surface pumps and pressure systems - The manual clearly explains the electrical and hydraulic installation procedure and includes a table for selecting the start-up pressure based on the installation height.
- Owners of homes supplied by a private water source - Automatic pump start and stop in response to water use, with clear panel indicators for low water and pressure sensor failure.
- Installations with periodic tank filling - Timing mode lets you control the pump at set intervals, e.g. in conjunction with a float switch that shuts off the supply to a tank or IBC container.
- Installations with fixed wiring - The version described, without a factory-fitted socket, makes it easier for a qualified electrician to connect the unit directly to the electrical circuit, without an intermediate wall socket.
Applications
- Automatic control of a surface pump working with a pressure tank in a domestic water system supplied from a private water source, upstream of the water treatment stage.
- Maintaining pressure in the system by starting the pump when water is drawn and stopping it when the outlet is closed.
- Controlling tank or IBC container filling in interval mode (Timing), e.g. in conjunction with a float switch that shuts off the water supply.
The DIG IBO 2 electronic pressure switch is designed exclusively for use with clean water. It is installed on the discharge side of a working pump that has been tested beforehand, upstream of the outlet (tap). The manufacturer recommends installing a check valve directly at the water source and ensuring that the water column above the controller is lower than the set start-up pressure.
Features, description, and technical data
The IBO DIG IBO 2 detects water pressure and flow rate in the pipeline, automatically starting and stopping the pump based on these readings. The initial pressure (start-up pressure) and stop pressure (shut-off pressure) are set on the panel using the "+" and "-" buttons and the Set button. Current parameters are shown on the digital display in the selected unit (bar, psi, or A). The panel also features LEDs indicating power, current operating mode, low water, and pump operation. The manual start button lets you restart the pump after it has stopped.
The controller offers two operating modes, selected from the panel: "Pressure Control" mode, which requires a pressure tank in the installation, and "Timing" mode, in which the pump runs cyclically at a set time interval (available intervals: 1, 3, 6, 12, or 24 hours) - a useful option, for example, when filling a tank or an IBC container using a float switch to shut off the water supply.
The DIG IBO 2's protective functions include: dry-run protection with an adjustable pressure threshold and shut-off delay, automatic restart once the water shortage has been resolved (with a 1-hour interval between attempts), automatic restart after a power failure and restoration of power, pump jam protection (automatic test run if the pump remains inactive for more than 48 hours), adjustable overcurrent protection (0-16 A), and alerts for a pressure sensor fault, continuous pump operation exceeding 6 hours without switching off, and excessively frequent start/stop cycles - the corresponding messages ("o5", "LL", "CC", "oCP", "oLP") are displayed directly on the device panel.
The device is powered by a single-phase 220-240 V (50/60 Hz) supply and supports pumps with a maximum operating current of up to 12 A and power of up to 1.5 kW. The start pressure setting range is 0.5-7.5 bar, and the stop pressure range is 0.8-9.6 bar, with a maximum permissible system pressure of 10 bar (1.0 MPa) - if the installation pressure is higher, the manufacturer requires a pressure reducer to be installed upstream of the controller. The IP65-rated housing, ambient temperature range up to 60°C, and pumped water temperature up to 40°C allow installation in typical utility rooms, provided the device is not exposed to rain, direct sunlight, or strong magnetic fields. The electrical installation must be connected to a circuit protected by a residual current device with a rated trip current no higher than 30 mA and should be carried out by a person with the appropriate electrical qualifications. The version described is supplied without a factory-fitted power outlet - the manufacturer also offers a version with an outlet.
- Device type: electronic pressure switch (pump controller)
- Brand: IBO
- Model: DIG IBO 2
- Version: without a factory-fitted power outlet (a version with an outlet is also available)
- Power supply: 1~220-240 V, 50/60 Hz
- Maximum current: 12 A (adjustable overload protection 0-16 A)
- Maximum power of supported pump: 1.5 kW
- Switch-on pressure setting range: 0,5-7,5 bar
- Switch-off pressure setting range: 0,8-9,6 bar
- Maximum system pressure: 10 bar (1.0 MPa)
- Protection rating: IP65
- Maximum pumped water temperature: 40°C
- Maximum ambient temperature: 60°C
- Connection: 1/4"
- Operating modes: Pressure Control (with a pressure tank), Timing (interval: 1/3/6/12/24 h)
- Protections: dry-run protection, overload protection, pump jamming protection, protection against excessively frequent switching cycles, pressure sensor fault indication
Content prepared based on general information. Contact us for details.
IBO – 24 months (2 years) manufacturer’s warranty.
Dambat – a trusted manufacturer of pumps and water engineering equipment with quality certifications.
Frequently asked questions (FAQ) – what is the DIG IBO 2 switch used for?
What is the IBO DIG IBO 2 pressure switch used for?
The DIG IBO 2 is an electronic pump controller that automatically switches on a surface pump when water is drawn and switches it off when the flow stops, based on the pressure and water flow in the pipeline. It operates in pressure control mode with a pressure tank or in Timing interval mode.
What operating modes does the DIG IBO 2 controller offer?
Two modes are available: "Pressure Control", which requires a pressure tank in the system, and "Timing", in which the pump runs cyclically at a set time interval (1, 3, 6, 12, or 24 hours) - useful, for example, for filling a tank with a float valve that shuts off the water supply.
How does the DIG IBO 2 differ from the DIG-IBO 1 model available from Dambat?
These are two separate models with different specifications. Before choosing a specific device for your system, compare their product specifications, particularly the enclosure protection rating and the permitted temperature of the pumped water.
How do I install the DIG IBO 2 switch in the system?
Install the controller on the discharge side of a previously tested pump, before the outlet (tap), with a check valve fitted at the water source. The electrical installation, based on a circuit protected by a residual current device, should be carried out by a qualified person.
Where can I buy the DIG IBO 2 switch manufactured by Dambat?
Dambat does not sell directly. The DIG IBO 2 switch is available from commercial partners, plumbing wholesalers, and authorized online distributors.
What are the warranty terms for the DIG IBO 2 switch?
IBO – 24 months (2 years) manufacturer’s warranty. Dambat provides warranty and post-warranty service.








