DIG-IBO 1 electronic pressure switch
DIG-IBO 1 by IBO is an electronic pressure switch for surface pumps. It controls the pump operation based on water pressure and flow, protecting it against dry running. The switching on and off thresholds are set on the display, thanks to which the installation maintains constant pressure and the pump does not run unnecessarily.
For whom
- Installers and plumbers - simple setting of pressure thresholds on the display facilitates the process of starting the hydrophore system.
- Home owners with their own water intake - the switch maintains constant pressure and stops the pump itself when there is no water.
- Users of hydrophore sets - the controller limits unnecessary pump activations, which extends its service life.
- Allotment gardeners and farms - automates the operation of the surface pump for daily water consumption and watering.
Application
DIG-IBO 1 works well in home and garden water installations with a surface pump. It works in networks equipped with a hydrophore tank. Turns the pump on when the pressure drops below the set threshold and flow occurs, and turns it off when the flow stops.
Single-phase pumps are connected directly, and three-phase pumps are connected via a contactor. The pump is controlled by an electronic pressure switch DIG-IBO 1, 230 V.
Features of the DIG-IBO switch 1
The device's functionality combines pump control with protection against dry running. The pump turns on when the pressure drops and the flow is activated, and turns off when the flow disappears. Pressure thresholds are set using buttons on the display, and the entered values are saved automatically.
Dry-running protection is enabled by default. When the pump runs without water, the switch stops it. The function can be disabled if necessary. DIG-IBO 1 is intended for surface pumps and should work in an installation with a hydrophore tank. Below are the most important parameters.
- Brand: IBO
- Type: electronic pressure switch for surface pumps
- Power supply: 230V, 50Hz
- Maximum power of the supported pump: 1.5 kW
- Working range (pressure): 0–10 bar
- Degree of protection: IP66
- Security: dry running protection (enabled by default)
- Maximum water temperature: 80°C
- Cooperation with pumps: single-phase directly, three-phase via contactor
IBO – 24 months (2 years) manufacturer's warranty.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – DIG-IBO circuit breaker 1
What is the DIG-IBO 1 pressure switch used for?
DIG-IBO 1 automatically turns the surface pump on and off depending on water pressure and flow. It also protects the pump against dry running and maintains constant pressure in the installation with the hydrophore tank.
What pumps does DIG-IBO 1 work with?
The switch is designed for surface pumps with a power of up to 1.5 kW with a 230 V power supply. Single-phase pumps are connected directly, and three-phase pumps are connected via a contactor.
Does DIG-IBO 1 protect the pump against dry running?
Yes. Dry-running protection is enabled by default. When the pump runs without water, the device turns it off. The function can be disabled if necessary.
Does DIG-IBO 1 require a hydrophore tank?
Yes. The device should operate in an installation with a hydrophore tank. This ensures stable operation and correct pressure and flow readings.
Is DIG-IBO 1 suitable for submersible pumps?
DIG-IBO 1 is intended for surface pumps. For pumps of a different type or with higher power, it is worth choosing a different model. The full range of products designed for this task can be found in the tab drivers.
Where to buy the DIG-IBO 1 switch?
As a manufacturer, we do not sell directly. The DIG-IBO 1 switch by IBO can be purchased from our trading partners, installation wholesalers and authorized online distributors.
What is the warranty for the DIG-IBO 1 switch?
IBO – 24 months (2 years) manufacturer's warranty.
