Description
CVI INOX 1-6 T – vertical multistage centrifugal pump made of stainless steel, in-line configuration
The IPRO CVI 1-6 T INOX is a vertical, multistage centrifugal pump with in-line ports, designed for precise operating point selection in installations requiring consistent performance and low noise levels. The impeller, diffuser and all hydraulic components in contact with the fluid are made of AISI 304 stainless steel, while the IE3 efficiency class three-phase motor meets current energy efficiency requirements for industrial drives. The in-line design allows installation directly along the pipeline axis, without the need to redesign the system.
Who it's for
- Industrial and manufacturing plants – the CVI 1-6 T INOX pump provides stable pressure in high-pressure circulation systems, cleaning systems and boiler room supply installations.
- Single-family homes and small commercial buildings – the multistage design provides high head at a low but stable flow rate, sufficient for a single building or a small installation.
- Maintenance departments – the in-line configuration makes it easier to replace the pump without dismantling an entire section of the installation, reducing downtime.
- Fire protection and air conditioning system installers – the pump is used in fire protection and refrigeration systems, as well as in air conditioning systems that require continuous, reliable operation.
Applications
The IPRO CVI 1-6 T INOX pump is designed for pumping clean, chemically non-aggressive liquids in domestic water supply systems, including water networks, pressure boosting stations and pressure boosting sets. W industrial environments, it is suitable for high-pressure circulation systems, air conditioning and refrigeration systems, fire protection systems, and for transferring oil, glycol and coolant. It is also used to supply boiler rooms and in machine lubrication systems.
W agriculture, the pump serves irrigation systems, sprinkler systems and irrigation installations, while in service businesses it is used in laundries and car washes. Selecting the right variant requires considering the NPSH characteristics of the suction system to avoid the risk of cavitation when operating near maximum capacity. The CVI 1-6 T INOX industrial pump operates on a three-phase system, powered by 3~230 V or 3~400 V.
CVI 1-6 T INOX features – design and technical data
The CVI 1-6 T INOX pump is designed with materials precisely allocated according to the function of each component. The pump head and base, as load-bearing components that do not come into direct contact with the pumped medium, are made of ASTM25B cast iron, ensuring structural rigidity. The pump shaft is made of AISI 431 stainless steel, selected for its high mechanical strength. All hydraulic components in contact with the medium—inlet, outlet, impeller, diffuser, pump casing, discharge port and cover—are made of AISI 304 stainless steel. The neck ring is made of PTFE, and the O-rings are made of EPDM/FKM. The cartridge mechanical seal (silicon carbide / tungsten carbide / EPDM) is designed for operation in the 10–90°C range.
The motors driving the CVI 1-6 T INOX belong to efficiency class IE3, compliant with the EU ecodesign regulation for electric motors. Efficiency and the power factor cos φ increase with motor power, affecting the selection of electrical protection devices and power cable cross-sections.
| Motor power (kW) | Power supply (V) | Current draw Δ/Y (A) | cos φ | Efficiency (%) |
|---|---|---|---|---|
| 0,37 | 230 / Y400 | 1,6 / 0,9 | 0,81 | 73,8 |
| 0,55 | 230 / Y400 | 2,1 / 1,2 | 0,82 | 77,8 |
| 0,75 | 230 / Y400 | 2,8 / 1,6 | 0,82 | 80,7 |
| 1,1 | 230 / Y400 | 4,0 / 2,3 | 0,83 | 82,7 |
| 1,5 | 230 / Y400 | 5,3 / 3,0 | 0,84 | 84,2 |
| 2,2 | 230 / Y400 | 7,6 / 4,4 | 0,85 | 85,9 |
| 3 | 230 / Y400 | 9,9 / 5,7 | 0,87 | 87,1 |
| 4 | 400 / Y690 | 7,5 / 4,3 | 0,88 | 88,1 |
| 5,5 | 400 / Y690 | 10,0 / 5,9 | 0,88 | 89,2 |
| 7,5 | 400 / Y690 | 13,5 / 7,8 | 0,88 | 90,1 |
| 11 | 400 / Y690 | 19,6 / 11,3 | 0,89 | 91,2 |
| 15 | 400 / Y690 | 26,5 / 15,3 | 0,89 | 91,9 |
| 18,5 | 400 / Y690 | 32,5 / 18,8 | 0,89 | 92,4 |
Current draw values are confirmed by nameplates and verified documentation; cos φ and efficiency are taken from IE3 motor technical documentation and are indicative.
- Pump type: vertical, multistage, centrifugal, in-line port configuration
- Power supply: 3~230 V / 3~400 V, 50 Hz
- Motor efficiency class: IE3
- Capacity: 1 m³/h for the entire CVI 1-6 T line
- Insulation class: F
- Protection rating: IP55
- Pumped liquid temperature range: -20°C to 90°C (104°C available on special order)
- Max. ambient temperature: 40°C
- Liquid pH range: 3–9
- Max. operating pressure: 22 bar
- Flange connection: DN25
- Rotational speed: 2900 rpm
IPRO - 36-month (3-year) manufacturer's warranty. Dambat provides warranty and post-warranty service.
Dambat - a trusted manufacturer of pumps and water engineering equipment with quality certifications.
Frequently Asked Questions (FAQ) - CVI 1-6 T INOX vertical pump
What industrial applications is the CVI 1-6 T INOX pump suitable for?
The IPRO CVI 1-6 T INOX pump is used in high-pressure circulation systems, air conditioning and refrigeration systems, fire protection systems, boiler room supply systems, and domestic water supply systems.
Why are the head and base of the CVI 1-6 T INOX pump made of cast iron if it is an "INOX" pump?
The INOX designation applies to the components in direct contact with the pumped medium - the impeller, diffuser, casing, inlet, and outlet - which are made of AISI 304 stainless steel. The pump head and base provide structural support and do not come into contact with the liquid, so they are made of ASTM25B cast iron to ensure adequate structural rigidity.
What is the IE3 efficiency class, and why does it matter when choosing a pump?
IE3 is an energy efficiency class for electric motors in accordance with the EU Ecodesign Regulation. Higher efficiency translates into lower operating costs during continuous operation, which is particularly important in industrial installations operating in S1 mode.
What liquids can the CVI 1-6 T INOX pump?
The pump is designed for chemically non-aggressive clean liquids at temperatures from -20°C to 90°C (up to 104°C on special order) and with a pH range of 3–9.
What capacity does the CVI 1-6 T pump offer?
The number at the beginning of each model designation in the series indicates the pump's nominal capacity class - for the CVI 1-6 T, this is 1 m³/h, or approx. 17 l/min. Yes This low flow rate makes the pump suitable for smaller installations: small commercial facilities, small cooling circuits, or dosing systems, but not for supplying water to entire multi-family buildings or large production lines.
Where can you buy the vertical CVI 1-6 T INOX pump?
Dambat does not sell directly to customers. The CVI 1-6 T INOX pump is available from our sales partners, plumbing wholesalers, and authorized online distributors.
Is the IPRO CVI 1-6 T INOX pump covered by the manufacturer's warranty?
IPRO - 36-month (3-year) manufacturer's warranty. Dambat provides warranty and post-warranty service.
- Flow rate [l/min.]: 16.6
- Head [m]: 33.0
- Power [kW]: 0.37
- Power supply [V]: 300–400 V
- Frequency [Hz]: 50
- Current [A]: 0.9
- Motor speed (rpm): 2900
- Operating mode: continuous
- Insulation class: F
- Protection rating: IP55
- Dimensions H/W/L [mm]: 535/235/250
- Min. liquid temperature [°C]: 10
- Max. liquid temperature: 90
- Max. ambient temperature [°C]: 40
- Product weight [kg]: 17.6
- Connection [DN/inches]: DN32 - DN32
- Installation position: Vertical
• Motor housing: AISI 304 stainless steel,
• Suction/discharge casing: AISI 304 stainless steel,
• Pump shaft: AISI 431 stainless steel,
• Impeller: AISI 304 stainless steel,
• Diffusers: AISI 304 stainless steel,
• Cartridge mechanical seal for standard versions from +10°C to 90°C: Silicon carbide/Tungsten carbide/EPDM.
CVI INOX 1-6 T – vertical multistage centrifugal pump made of stainless steel, in-line configuration
The IPRO CVI 1-6 T INOX is a vertical, multistage centrifugal pump with in-line ports, designed for precise operating point selection in installations requiring consistent performance and low noise levels. The impeller, diffuser and all hydraulic components in contact with the fluid are made of AISI 304 stainless steel, while the IE3 efficiency class three-phase motor meets current energy efficiency requirements for industrial drives. The in-line design allows installation directly along the pipeline axis, without the need to redesign the system.
Who it's for
- Industrial and manufacturing plants – the CVI 1-6 T INOX pump provides stable pressure in high-pressure circulation systems, cleaning systems and boiler room supply installations.
- Single-family homes and small commercial buildings – the multistage design provides high head at a low but stable flow rate, sufficient for a single building or a small installation.
- Maintenance departments – the in-line configuration makes it easier to replace the pump without dismantling an entire section of the installation, reducing downtime.
- Fire protection and air conditioning system installers – the pump is used in fire protection and refrigeration systems, as well as in air conditioning systems that require continuous, reliable operation.
Applications
The IPRO CVI 1-6 T INOX pump is designed for pumping clean, chemically non-aggressive liquids in domestic water supply systems, including water networks, pressure boosting stations and pressure boosting sets. W industrial environments, it is suitable for high-pressure circulation systems, air conditioning and refrigeration systems, fire protection systems, and for transferring oil, glycol and coolant. It is also used to supply boiler rooms and in machine lubrication systems.
W agriculture, the pump serves irrigation systems, sprinkler systems and irrigation installations, while in service businesses it is used in laundries and car washes. Selecting the right variant requires considering the NPSH characteristics of the suction system to avoid the risk of cavitation when operating near maximum capacity. The CVI 1-6 T INOX industrial pump operates on a three-phase system, powered by 3~230 V or 3~400 V.
CVI 1-6 T INOX features – design and technical data
The CVI 1-6 T INOX pump is designed with materials precisely allocated according to the function of each component. The pump head and base, as load-bearing components that do not come into direct contact with the pumped medium, are made of ASTM25B cast iron, ensuring structural rigidity. The pump shaft is made of AISI 431 stainless steel, selected for its high mechanical strength. All hydraulic components in contact with the medium—inlet, outlet, impeller, diffuser, pump casing, discharge port and cover—are made of AISI 304 stainless steel. The neck ring is made of PTFE, and the O-rings are made of EPDM/FKM. The cartridge mechanical seal (silicon carbide / tungsten carbide / EPDM) is designed for operation in the 10–90°C range.
The motors driving the CVI 1-6 T INOX belong to efficiency class IE3, compliant with the EU ecodesign regulation for electric motors. Efficiency and the power factor cos φ increase with motor power, affecting the selection of electrical protection devices and power cable cross-sections.
| Motor power (kW) | Power supply (V) | Current draw Δ/Y (A) | cos φ | Efficiency (%) |
|---|---|---|---|---|
| 0,37 | 230 / Y400 | 1,6 / 0,9 | 0,81 | 73,8 |
| 0,55 | 230 / Y400 | 2,1 / 1,2 | 0,82 | 77,8 |
| 0,75 | 230 / Y400 | 2,8 / 1,6 | 0,82 | 80,7 |
| 1,1 | 230 / Y400 | 4,0 / 2,3 | 0,83 | 82,7 |
| 1,5 | 230 / Y400 | 5,3 / 3,0 | 0,84 | 84,2 |
| 2,2 | 230 / Y400 | 7,6 / 4,4 | 0,85 | 85,9 |
| 3 | 230 / Y400 | 9,9 / 5,7 | 0,87 | 87,1 |
| 4 | 400 / Y690 | 7,5 / 4,3 | 0,88 | 88,1 |
| 5,5 | 400 / Y690 | 10,0 / 5,9 | 0,88 | 89,2 |
| 7,5 | 400 / Y690 | 13,5 / 7,8 | 0,88 | 90,1 |
| 11 | 400 / Y690 | 19,6 / 11,3 | 0,89 | 91,2 |
| 15 | 400 / Y690 | 26,5 / 15,3 | 0,89 | 91,9 |
| 18,5 | 400 / Y690 | 32,5 / 18,8 | 0,89 | 92,4 |
Current draw values are confirmed by nameplates and verified documentation; cos φ and efficiency are taken from IE3 motor technical documentation and are indicative.
- Pump type: vertical, multistage, centrifugal, in-line port configuration
- Power supply: 3~230 V / 3~400 V, 50 Hz
- Motor efficiency class: IE3
- Capacity: 1 m³/h for the entire CVI 1-6 T line
- Insulation class: F
- Protection rating: IP55
- Pumped liquid temperature range: -20°C to 90°C (104°C available on special order)
- Max. ambient temperature: 40°C
- Liquid pH range: 3–9
- Max. operating pressure: 22 bar
- Flange connection: DN25
- Rotational speed: 2900 rpm
IPRO - 36-month (3-year) manufacturer's warranty. Dambat provides warranty and post-warranty service.
Dambat - a trusted manufacturer of pumps and water engineering equipment with quality certifications.
Frequently Asked Questions (FAQ) - CVI 1-6 T INOX vertical pump
What industrial applications is the CVI 1-6 T INOX pump suitable for?
The IPRO CVI 1-6 T INOX pump is used in high-pressure circulation systems, air conditioning and refrigeration systems, fire protection systems, boiler room supply systems, and domestic water supply systems.
Why are the head and base of the CVI 1-6 T INOX pump made of cast iron if it is an "INOX" pump?
The INOX designation applies to the components in direct contact with the pumped medium - the impeller, diffuser, casing, inlet, and outlet - which are made of AISI 304 stainless steel. The pump head and base provide structural support and do not come into contact with the liquid, so they are made of ASTM25B cast iron to ensure adequate structural rigidity.
What is the IE3 efficiency class, and why does it matter when choosing a pump?
IE3 is an energy efficiency class for electric motors in accordance with the EU Ecodesign Regulation. Higher efficiency translates into lower operating costs during continuous operation, which is particularly important in industrial installations operating in S1 mode.
What liquids can the CVI 1-6 T INOX pump?
The pump is designed for chemically non-aggressive clean liquids at temperatures from -20°C to 90°C (up to 104°C on special order) and with a pH range of 3–9.
What capacity does the CVI 1-6 T pump offer?
The number at the beginning of each model designation in the series indicates the pump's nominal capacity class - for the CVI 1-6 T, this is 1 m³/h, or approx. 17 l/min. Yes This low flow rate makes the pump suitable for smaller installations: small commercial facilities, small cooling circuits, or dosing systems, but not for supplying water to entire multi-family buildings or large production lines.
Where can you buy the vertical CVI 1-6 T INOX pump?
Dambat does not sell directly to customers. The CVI 1-6 T INOX pump is available from our sales partners, plumbing wholesalers, and authorized online distributors.
Is the IPRO CVI 1-6 T INOX pump covered by the manufacturer's warranty?
IPRO - 36-month (3-year) manufacturer's warranty. Dambat provides warranty and post-warranty service.