Description
CVI vertical pump
As the manufacturer of the IPRO line, we design CVI vertical pumps as multistage centrifugal units with in-line ports, intended for pumping clean, chemically non-aggressive liquids. The series includes models with power ratings from 0.55 to 15 kW, with a head of up to 202 m, depending on the hydraulic range.
Who it's for
- Pressure station installers – we streamline selection within a single series: from the CVI 3 range with DN25–DN32 connections to the CVI 45 with a DN80 connection, without changing the installation method.
- Maintenance teams – we supply units designed for continuous operation in process circuits, with a clearly specified maximum number of starts per hour.
- Installation designers – we provide the full range of operating limits: liquid temperature, pH range, and permissible pressure in the installation and at the inlet.
- Farms and fish farms – we offer equipment for irrigation systems with a capacity of up to 920 l/min when supplied with three-phase power.
- Service businesses – we provide pumps with noise levels from 53 dB(A), an important consideration in laundries and car washes with staffed workstations.
Applications
- Pressure-boosting systems and pressure stations operating with clean water before treatment.
- Industrial installations: washing and rinsing systems, high-pressure circuits, boiler room supply and machine cooling.
- Air conditioning and refrigeration systems, including glycol and coolant transfer.
- Agriculture: sprinkler systems, irrigation systems, watering systems and fish farms.
- Services: laundries, car washes and facilities with high ceilings.
W CVI 400 V vertical pumps with a capacity of up to 920 l/min are used in facilities supplied with three-phase power.
Features, description and technical data
As the manufacturer of the IPRO line, we build the CVI series as vertical, multistage centrifugal pumps, with the suction and discharge ports positioned horizontally on the same axis (in line). This design allows the unit to be connected directly to existing piping without rerouting it, while the vertical operating position reduces the space occupied in a pressure-boosting station or process plant.
Our devices are driven by three-phase, two-pole motors, powered at 3~400 V and 50 Hz, and operating at 2,850 rpm. The motors have Class F insulation and an IP55 protection rating and are designed for continuous operation. The permissible switching frequency is 100 times per hour for motors rated up to and including 4 kW, and 20 times per hour for motors rated 5.5 kW and above. The sound pressure level LpA ranges from 53 to 75 dB(A), depending on motor power.
W In terms of hydraulics, the CVI series includes models with power ratings from 0.55 to 15 kW, head from 28 to 202 m, and flow rates from 74.5 to 920 l/min, or approximately 4.5 to 55.2 m³/h. Connections are selected according to the hydraulic series: DN25–DN32 for CVI 3 and CVI 5 series, DN40 for CVI 10, DN50 for CVI 15 and CVI 20, DN65 for CVI 32, and DN80 for CVI 45. The devices pump clean liquids with no excessive amount of mechanical impurities, that are chemically non-aggressive, with a temperature of 10°C to 90°C and a pH of 3 to 9, at an ambient temperature of up to 40°C.
Materials used:
- Motor housing – AISI 304 stainless steel.
- Suction and discharge casing – ASTM 25B cast iron.
- Pump shaft – AISI 420 stainless steel.
- Impellers and diffusers – AISI 304 stainless steel.
- Cartridge mechanical seal for standard versions, from +10°C to 90°C – silicon carbide / tungsten carbide / EPDM.
The CVI series is part of the IPRO range, which we offer as a solution for industrial and process applications. The first number in the designation indicates the hydraulic series corresponding to the nominal flow rate in m³/h, while the second indicates the number of pumping stages. Therefore, when selecting a pump, we always refer to its specific duty point, not just the series name. Detailed specifications for each model are provided in the technical data table and product catalog. W In Polish operating conditions, we install the devices indoors in areas protected from freezing, with an ambient temperature of up to 40°C.
CVI vertical pumps are technical devices designed for clean liquids and are not water treatment devices. They may only be used in installations supplying water for human consumption if the intended use of the specific model and the required approvals are specified in its technical documentation. The warranty terms and period are set out in the documentation supplied with the device. If you have any questions, please contact Dambat Service.
Dambat – a trusted manufacturer of pumps and water engineering equipment with quality certifications.
Frequently Asked Questions (FAQ) – What are CVI vertical pumps used for?
Where can I buy CVI vertical pumps made by Dambat?
As a manufacturer, we do not sell directly. CVI vertical pumps are available from our sales partners, plumbing wholesalers, and authorized online distributors.
Does Dambat help select a model from the CVI series?
As the manufacturer of the IPRO line, we provide product data sheets, performance curves, and operating instructions to help select a unit for the required duty point. Orders are placed through a chosen sales partner, while we provide technical and service support.
What liquids can CVI vertical pumps handle?
We designed the CVI series for clean, chemically non-aggressive liquids with a pH of 3 to 9 and a temperature of 10°C to 90°C. W industrial applications, this also includes transferring oil, glycol, and coolant in refrigeration and air conditioning systems.
How do CVI pumps differ from the CVI INOX version?
W the CVI series, the suction and discharge bodies are made of ASTM 25B cast iron, while the impellers, diffusers, and motor housing are made of AISI 304 stainless steel. W the CVI INOX series, all parts in contact with water are made entirely of stainless steel, which is the main design difference between these versions.
What do the numbers in a model name mean, for example CVI 5-12?
The first number indicates the hydraulic series, corresponding to the nominal flow rate in m³/h, while the second indicates the number of pumping stages, which determines the head achieved. Two models in the same series have similar flow rates but different operating pressures.
How should CVI 400 V vertical pumps be installed?
Install the units vertically, with the suction and discharge ports arranged horizontally in line, in a room with an ambient temperature not exceeding 40°C and protected against freezing. The three-phase power supply 3~400 V, 50 Hz, and motor protection must be provided in accordance with the operating instructions.
How many starts per hour are allowed for CVI series pumps?
For motors rated up to and including 4 kW, we allow a maximum of 100 starts per hour, and for motors rated 5.5 kW and above, a maximum of 20. More frequent cycling shortens the service life of the mechanical seal and motor, so for systems with variable demand, we recommend using a suitably selected diaphragm tank or speed control.
- Flow rate [l/min.]: 132.0
- Head [m]: 30.5
- Power [kW]: 0.75
- Power supply [V]: 300–400 V
- Frequency [Hz]: 50
- Motor speed (rpm): 2850
- Operating mode: continuous
- Insulation class: F
- Protection rating: IP55
- Min. liquid temperature [°C]: 10
- Max. liquid temperature: 90
- Max. ambient temperature [°C]: 40
- Product weight [kg]: 24.0
- Connection [DN/inches]: DN25 - DN32
- Installation position: Vertical
- Max. number of starts (cycles/h): 100
- Outlet direction: Levels
- Permissible pH: 3-9
ADDITIONAL INFORMATION
- Noise level LpA: 53 dB(A),
- Maximum system pressure: 25 bar,
- Maximum inlet pressure: 10 bar.
• Motor housing: AISI 304 stainless steel,
• Suction/discharge casing: ASTM25B cast iron,
• Pump shaft: AISI 420 stainless steel,
• Impeller: AISI 304 stainless steel,
• Diffusers: AISI 304 stainless steel,
• Cartridge mechanical seal for standard versions from +10°C to 90°C: silicon carbide/tungsten carbide/EPDM.
CVI vertical pump
As the manufacturer of the IPRO line, we design CVI vertical pumps as multistage centrifugal units with in-line ports, intended for pumping clean, chemically non-aggressive liquids. The series includes models with power ratings from 0.55 to 15 kW, with a head of up to 202 m, depending on the hydraulic range.
Who it's for
- Pressure station installers – we streamline selection within a single series: from the CVI 3 range with DN25–DN32 connections to the CVI 45 with a DN80 connection, without changing the installation method.
- Maintenance teams – we supply units designed for continuous operation in process circuits, with a clearly specified maximum number of starts per hour.
- Installation designers – we provide the full range of operating limits: liquid temperature, pH range, and permissible pressure in the installation and at the inlet.
- Farms and fish farms – we offer equipment for irrigation systems with a capacity of up to 920 l/min when supplied with three-phase power.
- Service businesses – we provide pumps with noise levels from 53 dB(A), an important consideration in laundries and car washes with staffed workstations.
Applications
- Pressure-boosting systems and pressure stations operating with clean water before treatment.
- Industrial installations: washing and rinsing systems, high-pressure circuits, boiler room supply and machine cooling.
- Air conditioning and refrigeration systems, including glycol and coolant transfer.
- Agriculture: sprinkler systems, irrigation systems, watering systems and fish farms.
- Services: laundries, car washes and facilities with high ceilings.
W CVI 400 V vertical pumps with a capacity of up to 920 l/min are used in facilities supplied with three-phase power.
Features, description and technical data
As the manufacturer of the IPRO line, we build the CVI series as vertical, multistage centrifugal pumps, with the suction and discharge ports positioned horizontally on the same axis (in line). This design allows the unit to be connected directly to existing piping without rerouting it, while the vertical operating position reduces the space occupied in a pressure-boosting station or process plant.
Our devices are driven by three-phase, two-pole motors, powered at 3~400 V and 50 Hz, and operating at 2,850 rpm. The motors have Class F insulation and an IP55 protection rating and are designed for continuous operation. The permissible switching frequency is 100 times per hour for motors rated up to and including 4 kW, and 20 times per hour for motors rated 5.5 kW and above. The sound pressure level LpA ranges from 53 to 75 dB(A), depending on motor power.
W In terms of hydraulics, the CVI series includes models with power ratings from 0.55 to 15 kW, head from 28 to 202 m, and flow rates from 74.5 to 920 l/min, or approximately 4.5 to 55.2 m³/h. Connections are selected according to the hydraulic series: DN25–DN32 for CVI 3 and CVI 5 series, DN40 for CVI 10, DN50 for CVI 15 and CVI 20, DN65 for CVI 32, and DN80 for CVI 45. The devices pump clean liquids with no excessive amount of mechanical impurities, that are chemically non-aggressive, with a temperature of 10°C to 90°C and a pH of 3 to 9, at an ambient temperature of up to 40°C.
Materials used:
- Motor housing – AISI 304 stainless steel.
- Suction and discharge casing – ASTM 25B cast iron.
- Pump shaft – AISI 420 stainless steel.
- Impellers and diffusers – AISI 304 stainless steel.
- Cartridge mechanical seal for standard versions, from +10°C to 90°C – silicon carbide / tungsten carbide / EPDM.
The CVI series is part of the IPRO range, which we offer as a solution for industrial and process applications. The first number in the designation indicates the hydraulic series corresponding to the nominal flow rate in m³/h, while the second indicates the number of pumping stages. Therefore, when selecting a pump, we always refer to its specific duty point, not just the series name. Detailed specifications for each model are provided in the technical data table and product catalog. W In Polish operating conditions, we install the devices indoors in areas protected from freezing, with an ambient temperature of up to 40°C.
CVI vertical pumps are technical devices designed for clean liquids and are not water treatment devices. They may only be used in installations supplying water for human consumption if the intended use of the specific model and the required approvals are specified in its technical documentation. The warranty terms and period are set out in the documentation supplied with the device. If you have any questions, please contact Dambat Service.
Dambat – a trusted manufacturer of pumps and water engineering equipment with quality certifications.
Frequently Asked Questions (FAQ) – What are CVI vertical pumps used for?
Where can I buy CVI vertical pumps made by Dambat?
As a manufacturer, we do not sell directly. CVI vertical pumps are available from our sales partners, plumbing wholesalers, and authorized online distributors.
Does Dambat help select a model from the CVI series?
As the manufacturer of the IPRO line, we provide product data sheets, performance curves, and operating instructions to help select a unit for the required duty point. Orders are placed through a chosen sales partner, while we provide technical and service support.
What liquids can CVI vertical pumps handle?
We designed the CVI series for clean, chemically non-aggressive liquids with a pH of 3 to 9 and a temperature of 10°C to 90°C. W industrial applications, this also includes transferring oil, glycol, and coolant in refrigeration and air conditioning systems.
How do CVI pumps differ from the CVI INOX version?
W the CVI series, the suction and discharge bodies are made of ASTM 25B cast iron, while the impellers, diffusers, and motor housing are made of AISI 304 stainless steel. W the CVI INOX series, all parts in contact with water are made entirely of stainless steel, which is the main design difference between these versions.
What do the numbers in a model name mean, for example CVI 5-12?
The first number indicates the hydraulic series, corresponding to the nominal flow rate in m³/h, while the second indicates the number of pumping stages, which determines the head achieved. Two models in the same series have similar flow rates but different operating pressures.
How should CVI 400 V vertical pumps be installed?
Install the units vertically, with the suction and discharge ports arranged horizontally in line, in a room with an ambient temperature not exceeding 40°C and protected against freezing. The three-phase power supply 3~400 V, 50 Hz, and motor protection must be provided in accordance with the operating instructions.
How many starts per hour are allowed for CVI series pumps?
For motors rated up to and including 4 kW, we allow a maximum of 100 starts per hour, and for motors rated 5.5 kW and above, a maximum of 20. More frequent cycling shortens the service life of the mechanical seal and motor, so for systems with variable demand, we recommend using a suitably selected diaphragm tank or speed control.