Application
The centralizer is used to stabilize the pump inside the well pipe and prevents the pump from moving during the engine starting torque.
Construction
The centralizer is made of durable rubber, the shape of which can be adjusted depending on the size of the well. The centralizer is cut longitudinally and finished with two clamps allowing it to be mounted on the discharge pipe. By bringing the centralizer clamps closer together, we will increase its diameter, thus adapting it to the diameter of the well.
Installation
The centralizer should be mounted on the discharge pipe. To install it, tighten the clamps in such a way that the centralizer does not move along the discharge system. It is important that the upper clamp is tightened more tightly than the lower clamp, so that the pump can be easily dismantled if necessary. The lower clamp of the centralizer should be 10-20 cm above the pump. The centralizer should be adapted to the diameter of the well, but not to the extent that it makes lowering the pump into the well difficult.
Properties
The centralizer is designed for systems equipped with a discharge pipe with a diameter of 1" to 1¼" and a casing pipe from 4" to 8". The clamps attached to the centralizer are made of stainless steel.
