BOLO 2300 - submersible pump for sewage with a grinder
submersible pump BOLO 2300 by IBO with a built-in shredding mechanism
a device designed for pumping septic tanks, sewage and rainwater. Bar
The float switch allows installation in narrow wells and automatically controls
operation of the pump, protecting it against starting without water.
For whom
-
House and plot owners – columnar Float allows installation in narrow wells, and the built-in shredder reduces the risk of clogging when draining the septic tank.
-
Installation and service companies – built-in float switch automates pump operation without additional control equipment.
-
Agricultural and breeding farms – high power of 2300 W allows for efficient drainage of larger amounts of sewage and rainwater.
-
Construction companies and enterprises – compact design facilitates portable installation when draining flooded rooms.
Application
submersible pump BOLO 2300 is designed for pumping septic tanks, sewage and water
rainy. The pump can be installed with a flexible discharge hose or screwed on
for a rigid discharge pipeline.
The device is cooled by the surrounding water, so the motor body should be
always submerged to at least half of its height - longer operation when exposed
the pump may overheat. submersible pump BOLO 2300 230 V reaches lifting height
up to 10 m with a capacity of up to 665 l/min.
Features of the BOLO 2300 pump
The BOLO 2300 pump is made of gray cast iron cover and body, and the motor housing
made of AISI 304 stainless steel. The shaft is made of AISI 304 stainless steel, and the stuffing box
the mechanical one works in the SiC/graphite/NBR system.
The post float switch allows installation in narrow wells where
traditional Float the ball would have too little space to move freely. Built-in
the shredding mechanism crushes solid pollutants contained in the sewage before it is washed
overpressure, and the thermal protection built into the winding turns off the pump in the event of a break
motor overload. Installing a non-return valve on the discharge port prevents this
water flowing back after turning off the pump.
- Pump type: submersible pump for sewage, with a built-in grinding mechanism
- Power supply: 230V (single phase)
- Engine power: 2300 W
- Lifting height (Hmax): 10 m
- Efficiency (Qmax): 665 l/min
- Insulation class: F
- Degree of protection: IP68
- Working mode: continuous
- Working position: vertical
- Rotational speed: 2800 rpm
- Max. liquid temperature: 35°C
- Switch: post float switch
- Motor protection: thermal, built into the winding
- Connection: GW 2"
IBO – 24 months (2 years) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – submersible pump BOLO 2300
What type of sewage is the BOLO 2300 pump intended for?
The pump is intended for pumping septic tanks, sewage and rainwater. Acceptable
the size of solid impurities is 50 mm and the water must not contain any elements
abrasive materials such as sand.
Does the BOLO 2300 pump crush solid impurities?
Yes, the pump is equipped with a mechanism that grinds solid impurities
in sewage. For safety reasons, never put your hands into the discharge port
or the suction of a pump connected to the power supply.
How narrow a sump does the BOLO 2300 pump fit into?
Thanks to the post-type float switch, the pump can operate in narrower spaces
wells than traditional models float switch ball that requires more
space for free movement.
Will the BOLO 2300 pump work in my installation?
The pump requires submersion at least halfway up the motor body because it is
cooled by the surrounding water. When connected to a rigid pipeline, it is recommended
installation of a non-return valve on the discharge port, limiting cyclic activation
pumps. If in doubt, we encourage you to
contact the technical department.
Where can you buy the BOLO 2300 submersible pump?
Dambat does not sell directly. The BOLO 2300 pump is available from partners
commercial stores, installation wholesalers and authorized online distributors.
What warranty conditions apply to the BOLO 2300 pump?
IBO – 24 months (2 years) manufacturer's warranty. Warranty and post-warranty service
Dambat assures.
