Ball check valves are protective devices that safeguard pressurized pipelines against unwanted backflow. They are most commonly used on discharge risers in pumping stations for domestic and municipal wastewater, as well as in pumping stations for
rainwater. The design and material selection allow for wide use in installations inside pumping station tanks, on above-ground transmission pipelines, and also underground, both in vertical and
and horizontal (while maintaining the correct flow direction).
Features:
• Full-bore flow
• Self-cleaning ball
• Low sealing pressure
• Vertical and horizontal installation
• Quiet operation
• Inspection chamber for cleaning and replacing the ball
Technical data:
- The products meet the requirements of the following standards:
- EN1092-2 PN16 and AS4087, AS4087 (AS2129 Table E),
- ISO 228-1 for BSP threads,
- Category A, ISO5208 standard,
- EN558-1 series 48 (DIN3202 F6).
-
Threaded valve diameter range: DN25 (1”) up to DN65 (2-1/2”).
- Flanged valve diameter range: DN50 to DN100.
- Maximum operating pressure: 16 bar.
- Minimum back pressure guaranteeing tightness: 0.3 to 0.5 bar.
- Test pressure:
- for the ball seat: 1.1 × nominal pressure,
- – for the body: 1.5 × nominal pressure.
-
Operating temperature range: 10–80°C.
-
The installation length of the valves and the connection sizes of flanges and threads comply with the requirements of the standards listed above.
-
The correct direction of fluid flow through the valve is indicated by an arrow on the body.
-
The durable and simple design ensures long-term, trouble-free operation.
-
The valve closure (shutter) consists of a smooth ball covered with a layer of sewage-resistant EPDM. As the ball freely rotates in its seat, into which it is driven by the fluid flow, the ball is cleaned of solid particles carried by the medium.
-
The valves have a bolt-secured inspection cover for inspection and convenient cleaning if non-standard sewage solids enter.
|
Dimensions according to EN1092-2 PN6
|
|
DN
|
L
|
D
|
D1
|
D2
|
n-d
|
b
|
H
|
|
DN50 PN6
|
200
|
165
|
110
|
90
|
4 - 14
|
19
|
106
|
|
DN65 PN6
|
240
|
185
|
130
|
110
|
4 - 14
|
19
|
134
|
|
DN80 PN6
|
260
|
200
|
150
|
28
|
4 - 18
|
19
|
155
|
|
DN100 PN6
|
300
|
220
|
170
|
148
|
4 - 18
|
19
|
192
|
|
DN150 PN6
|
400
|
285
|
225
|
202
|
8-18
|
19
|
268
|
Materials:
- Body: ductile iron,
- Ball: steel/NBR,
- O-ring: EPDM,
- Inspection cover: ductile iron,
- Bolt: AISI 304 stainless steel,
- Nut: AISI 304 stainless steel,
- Washer: AISI 304 stainless steel.
