AQUILO - intelligent pump with a frequency converter
AQUILO is a compact, intelligent pump with a frequency converter, designed to supply clean water to households from its own wells and to increase the pressure from the water supply network. It maintains constant pressure at all draw-off points, operates quietly and consumes less energy than a classic pressure booster set. With a 600 W motor, it can lift up to 45 m and deliver up to 50 l/min.
For whom
- Owners of single-family houses - constant water pressure throughout the installation and quiet operation allowing installation close to the living area.
- Residents of areas with a weak network - effective raising of too low water pressure.
- Gardeners and allotment gardeners – Power supply watering with water from a well or reservoir.
- People who value simple installation - small dimensions and low weight make it easy to assemble and move the device.
- Installers – simple two-button configuration without separate automation, clear parameters and manufacturer support.
Application
The AQUILO pump plays the role of the heart of the home water installation: it draws raw water from your own well or raises too low pressure from the water supply network, maintaining an even flow at each draw-off valve. This is a solution for modernizing the water installation at home wherever a classic hydrophore does not provide stable pressure.
The device will also handle garden irrigation and watering with rainwater collected from the tank. The AQUILO 230 V inverter pump works with typical installations found in Polish single-family houses.
AQUILO features
AQUILO is a pump with a built-in inverter that smoothly regulates the rotational speed of the permanent magnet motor and maintains the set pressure regardless of the number of open intake points. Smooth speed regulation allows you to avoid sudden changes in pressure and water hammer, and operation at reduced speed translates into quiet operation (50 dB) and lower energy consumption compared to classic hydrophore sets.
The pump starts automatically when water is drawn in and stops automatically when it is finished; the working pressure is set using two buttons, and the current parameters and operating codes are shown on the control panel. The controller provides a set of protections: protection against dry running (without the need to install probes and sensors in the well), overload, too high and low pressure and voltage, as well as against freezing and too high temperature.
The compact design and low weight (8 kg) make it easy to install in various places and move the device. The IP55 protection level and quiet operation allow installation also in utility rooms. When the pump remains connected but not in use, the controller turns it on for a moment, preventing hydraulic parts from stagnating.
- Max Lift: 45 m
- Max capacity: 50 l/min
- Suction capacity: 8 m
- Power: 600W (0.6kW)
- Engine speed: 4800 rpm
- Power supply: 1×230V (165-240V), 50Hz
- Connections: 1" × 1"
- Degree of protection: IP55
- Insulation class: F
- Working mode: continuous
- Max. liquid temperature: 75°C
- Max. ambient temperature: 45°C
- Noise Level: 50 dB
- Drive: permanent magnet motor
IBO – 24 months (2 years) manufacturer's warranty.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – what is the AQUILO pump used for?
What is the AQUILO pump used for?
AQUILO supplies households with raw water from its own well and relieves too low pressure from the water supply network. Thanks to the built-in inverter, it maintains constant pressure on all intake valves, and the capacity of up to 50 l/min covers the needs of a single-family house.
How does a pump with an inverter differ from a classic hydrophore set?
Instead of cyclical switching on and off, the pump smoothly regulates the engine speed, adapting it to the current water consumption. The result is constant pressure, gentle starts, quieter operation and lower power consumption than in a system with a traditional hydrophore.
Is AQUILO suitable for watering the garden with rainwater from a tank?
Yes, the pump can draw water from a rainwater tank or well and power the irrigation system. When drawing from an open source, a non-return valve should be installed on the suction pipe to prevent automatic emptying of the pipeline - appropriate elements can be found in accessories for surface and hydrophore pumps.
How do I start and configure the pump?
Start-up does not require a specialist visit - the operating pressure is set using buttons, and the pump starts and stops automatically as water is consumed. Current parameters and operating codes are shown on the control panel.
Where can you buy the AQUILO pump?
Dambat, as a manufacturer, does not conduct direct sales. The AQUILO pump is available from our trading partners, installation wholesalers and authorized online distributors.
What warranty does the AQUILO pump cover?
IBO – 24 months (2 years) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
