AMG 32-80/180 circulator pump (230 V) – energy-efficient IBO central heating circulator with 10 operating modes
AMG is an energy-efficient circulator pump by IBO that drives the circulation of heating fluid in central heating systems. Its permanent magnet motor, differential pressure controller and ten operating modes allow the pump to be precisely adjusted to any system, while keeping energy consumption very low (efficiency class EEI ≤ 0.20).
Who it's for
-
Installers and heating companies – 10 operating modes (AUTO, proportional and constant pressure, and constant speed) selected with a single button let you adapt the pump to any system, and union fittings with seals are included.
-
Users of domestic central heating systems – AUTO/ECO mode automatically adjusts output to demand, maintaining thermal comfort with power consumption starting at just a few watts.
-
Underfloor and radiator heating systems – proportional and constant pressure curves adjust the flow to changing heat demand in individual circuits.
-
Technical service – LED mode indicators on the panel and no need for external motor protection make operation and inspections easier.
Applications
- Circulation of heating fluid in domestic central heating systems.
- Constant-temperature heating systems with variable flow and systems with variable pipeline temperature.
- Underfloor and radiator heating.
- Air conditioning systems and industrial circulation systems.
The AMG 230 V circulator pump must be installed with the motor shaft in a horizontal position, between shut-off valves, in the direction of flow indicated by the arrow on the housing.
AMG pump features – description and technical data
The AMG is powered by an energy-efficient permanent magnet motor and equipped with a differential pressure controller. The operating mode is selected with a single button on the panel, and indicated by LED lights. Ten modes are available: AUTO self-adapting mode, three proportional pressure curves (PP I–III), three constant pressure curves (CP I–III) and three constant speed settings (CS I–III), with CS III as the factory setting. This makes the pump quiet and economical to run, with power consumption of up to 5 W, depending on the system.
The control panel is located on the side of the motor, making it easy to operate and bleed the pump (activated by a button). The motor design means there is no need to install a separate motor protection device in the system. The pump works with clean heating fluid: a non-corrosive liquid free of solid particles, fibers and mineral oil, with a pH of 6.5–8.5. W union fittings with rubber seals are included.
- Type: central heating circulator pump with permanent magnet motor
- Number of operating modes: 10 (AUTO + proportional pressure PP I–III + constant pressure CP I–III + constant speed CS I–III)
- Power supply: 1~230 V, 50 Hz
- Energy efficiency class: EEI ≤ 0.20
- Protection rating: IP44
- Insulation class: E
- Heating fluid temperature: from 2 to 110 °C
- Ambient temperature: from 0 to 40 °C
- Max. system pressure: 1 MPa (10 bar)
- pH of pumped fluid: 6,5–8,5
- Motor protection: no additional (external) motor protection needs to be installed in the system
- Installation: shaft in a horizontal position; union fittings with seals included
IBO – 24 months (2 years) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certifications.
Frequently asked questions (FAQ) – AMG circulator pump
What is the AMG circulator pump used for?
The IBO AMG circulates heating fluid in central heating systems, maintaining a constant flow through radiators or underfloor heating loops. It is suitable for domestic, air conditioning, and industrial circulation systems.
How many operating modes does the AMG pump have, and what are they?
The AMG offers 10 operating modes selected using the button on the panel: adaptive AUTO, three proportional pressure curves (PP I–III), three constant pressure curves (CP I–III), and three constant speed settings (CS I–III). The factory setting is CS III.
What is AUTO mode on the AMG pump?
In AUTO mode, the pump automatically adjusts its output to the installation’s current demand according to the proportional pressure curve. W most installations, this allows the pump to be started without any manual adjustment.
Does the AMG pump support PWM signal control?
This version of the AMG pump does not have a PWM input - control is handled internally using the button on the panel, with 10 available modes. A separate AMG version with PWM support is designed for control using an external PWM signal.
How do I install the AMG pump?
Install the pump with the motor shaft in a horizontal position, following the flow direction indicated by the arrow on the housing and using the included union fittings with seals. Installing shut-off valves on both sides of the pump is recommended to make maintenance easier.
Where can I buy the AMG circulator pump?
The manufacturer does not sell directly. The AMG pump is available from commercial partners, plumbing wholesalers, and authorized online distributors.
What warranty does the AMG pump have?
The IBO AMG circulator pump comes with a 24-month (2-year) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.