Description
AMG 25-80/130 circulation pump (230 V) – energy-efficient IBO central heating circulator with 10 operating modes
AMG is an energy-efficient circulation pump by IBO that drives heating fluid through central heating systems. Its permanent magnet motor, differential pressure controller, and ten operating modes allow the pump to be precisely adapted to any system, while keeping energy consumption very low (efficiency class EEI ≤ 0.20).
Who it's for
- Installers and heating companies – 10 operating modes (AUTO, proportional and constant pressure, and constant speed), selected with a single button, let you adapt the pump to any system, and unions with seals are included.
- Users of domestic central heating systems – AUTO/ECO mode automatically adjusts output to demand, maintaining thermal comfort with power consumption starting at just a few watts.
- Underfloor and radiator heating systems – proportional and constant pressure curves adjust the flow to changing heat demand in individual circuits.
- Technical service – LED mode indicators on the panel and no need for external motor protection make operation and maintenance easier.
Applications
- Heating fluid circulation in domestic central heating systems.
- Constant-temperature heating systems with variable flow and systems with variable pipe temperature.
- Underfloor and radiator heating.
- Air conditioning systems and industrial circulation systems.
The AMG 230 V circulation pump must be installed with the motor shaft in a horizontal position, between shut-off valves, in the direction of flow indicated by the arrow on the housing.
AMG pump features, description and technical specifications
The AMG is powered by an energy-efficient permanent magnet motor and equipped with a differential pressure controller. The operating mode is selected with a single button on the panel, and LEDs indicate the selection. Ten modes are available: AUTO self-adapting mode, three proportional pressure curves (PP I–III), three constant pressure curves (CP I–III), and three constant speed settings (CS I–III); the factory setting is CS III. This allows the pump to run quietly and efficiently, with power consumption of up to 5 W, depending on the installation.
The control panel is located on the side of the motor, making operation and venting (activated by a button) easier. The motor design means no separate motor protection needs to be installed in the system. The pump is suitable for clean heating fluid: a non-corrosive liquid with no solid particles, fibers, or mineral oil and a pH of 6.5–8.5. W unions with rubber seals are included.
- Type: central heating circulation pump with permanent magnet motor
- Number of operating modes: 10 (AUTO + proportional pressure PP I–III + constant pressure CP I–III + constant speed CS I–III)
- Power supply: 1~230 V, 50 Hz
- Energy efficiency class: EEI ≤ 0.20
- Protection rating: IP44
- Insulation class: E
- Heating fluid temperature: 2 to 110 °C
- Ambient temperature: 0 to 40 °C
- Maximum system pressure: 1 MPa (10 bar)
- Pumped liquid pH: 6,5–8,5
- Motor protection: no additional (external) motor protection needs to be installed in the system
- Installation: shaft in a horizontal position; unions with seals included
IBO - 24-month (2-year) manufacturer’s warranty. Dambat provides warranty and post-warranty service.
Dambat - a trusted manufacturer of pumps and hydrotechnical equipment with quality certifications.
Frequently asked questions (FAQ) - AMG circulation pump
What is the AMG circulation pump used for?
The IBO AMG circulates heating fluid in central heating systems, maintaining a constant flow through radiators or underfloor heating loops. It is suitable for domestic, air conditioning, and industrial circulation systems.
How many operating modes does the AMG pump have, and what are they?
The AMG offers 10 operating modes, selected using the button on the panel: adaptive AUTO, three proportional pressure curves (PP I–III), three constant pressure curves (CP I–III), and three constant speed settings (CS I–III). The factory setting is CS III.
What is AUTO mode on the AMG pump?
In AUTO mode, the pump automatically adjusts its output to the system’s current demand according to the proportional pressure curve. W most systems, this allows the pump to be started without any manual adjustment.
Does the AMG pump support PWM signal control?
This version of the AMG pump does not have a PWM input - control is handled internally using the button on the panel, with 10 available modes. A separate AMG version with PWM support is designed for control via an external PWM signal.
How do I install the AMG pump?
Install the pump with the motor shaft in a horizontal position, following the flow direction indicated by the arrow on the housing, using the included unions with seals. It is recommended to install shut-off valves on both sides of the pump to make maintenance easier.
Where can I buy the AMG circulation pump?
The manufacturer does not sell directly. The AMG pump is available from sales partners, plumbing wholesalers, and authorized online distributors.
What warranty does the AMG pump have?
The IBO AMG circulation pump comes with a 24-month (2-year) manufacturer’s warranty. Dambat provides warranty and post-warranty service.
- Capacity [l/min.]: 60.0
- Head [m]: 8.0
- Power [kW]: 0.6
- Power supply [V]: 1~230 V
- Frequency [Hz]: 50
- Current [A]: 0.65
- Operating mode: continuous
- Insulation class: E
- Protection rating: IP44
- Dimensions H/W/L [mm]: 130/98/125
- Min. liquid temperature [°C]: 2
- Max. liquid temperature: 110
- Max. ambient temperature [°C]: 40
- Maximum tested pressure: 1.0
- Product weight [kg]: 1.8
- Power cable length (m): 0.6
- Connection [DN/inches]: 1½" x 1"
- Installation position: horizontal
- Pre-charge pressure: 0.005
- Circuit number of modes: 10
AMG 25-80/130 circulation pump (230 V) – energy-efficient IBO central heating circulator with 10 operating modes
AMG is an energy-efficient circulation pump by IBO that drives heating fluid through central heating systems. Its permanent magnet motor, differential pressure controller, and ten operating modes allow the pump to be precisely adapted to any system, while keeping energy consumption very low (efficiency class EEI ≤ 0.20).
Who it's for
- Installers and heating companies – 10 operating modes (AUTO, proportional and constant pressure, and constant speed), selected with a single button, let you adapt the pump to any system, and unions with seals are included.
- Users of domestic central heating systems – AUTO/ECO mode automatically adjusts output to demand, maintaining thermal comfort with power consumption starting at just a few watts.
- Underfloor and radiator heating systems – proportional and constant pressure curves adjust the flow to changing heat demand in individual circuits.
- Technical service – LED mode indicators on the panel and no need for external motor protection make operation and maintenance easier.
Applications
- Heating fluid circulation in domestic central heating systems.
- Constant-temperature heating systems with variable flow and systems with variable pipe temperature.
- Underfloor and radiator heating.
- Air conditioning systems and industrial circulation systems.
The AMG 230 V circulation pump must be installed with the motor shaft in a horizontal position, between shut-off valves, in the direction of flow indicated by the arrow on the housing.
AMG pump features, description and technical specifications
The AMG is powered by an energy-efficient permanent magnet motor and equipped with a differential pressure controller. The operating mode is selected with a single button on the panel, and LEDs indicate the selection. Ten modes are available: AUTO self-adapting mode, three proportional pressure curves (PP I–III), three constant pressure curves (CP I–III), and three constant speed settings (CS I–III); the factory setting is CS III. This allows the pump to run quietly and efficiently, with power consumption of up to 5 W, depending on the installation.
The control panel is located on the side of the motor, making operation and venting (activated by a button) easier. The motor design means no separate motor protection needs to be installed in the system. The pump is suitable for clean heating fluid: a non-corrosive liquid with no solid particles, fibers, or mineral oil and a pH of 6.5–8.5. W unions with rubber seals are included.
- Type: central heating circulation pump with permanent magnet motor
- Number of operating modes: 10 (AUTO + proportional pressure PP I–III + constant pressure CP I–III + constant speed CS I–III)
- Power supply: 1~230 V, 50 Hz
- Energy efficiency class: EEI ≤ 0.20
- Protection rating: IP44
- Insulation class: E
- Heating fluid temperature: 2 to 110 °C
- Ambient temperature: 0 to 40 °C
- Maximum system pressure: 1 MPa (10 bar)
- Pumped liquid pH: 6,5–8,5
- Motor protection: no additional (external) motor protection needs to be installed in the system
- Installation: shaft in a horizontal position; unions with seals included
IBO - 24-month (2-year) manufacturer’s warranty. Dambat provides warranty and post-warranty service.
Dambat - a trusted manufacturer of pumps and hydrotechnical equipment with quality certifications.
Frequently asked questions (FAQ) - AMG circulation pump
What is the AMG circulation pump used for?
The IBO AMG circulates heating fluid in central heating systems, maintaining a constant flow through radiators or underfloor heating loops. It is suitable for domestic, air conditioning, and industrial circulation systems.
How many operating modes does the AMG pump have, and what are they?
The AMG offers 10 operating modes, selected using the button on the panel: adaptive AUTO, three proportional pressure curves (PP I–III), three constant pressure curves (CP I–III), and three constant speed settings (CS I–III). The factory setting is CS III.
What is AUTO mode on the AMG pump?
In AUTO mode, the pump automatically adjusts its output to the system’s current demand according to the proportional pressure curve. W most systems, this allows the pump to be started without any manual adjustment.
Does the AMG pump support PWM signal control?
This version of the AMG pump does not have a PWM input - control is handled internally using the button on the panel, with 10 available modes. A separate AMG version with PWM support is designed for control via an external PWM signal.
How do I install the AMG pump?
Install the pump with the motor shaft in a horizontal position, following the flow direction indicated by the arrow on the housing, using the included unions with seals. It is recommended to install shut-off valves on both sides of the pump to make maintenance easier.
Where can I buy the AMG circulation pump?
The manufacturer does not sell directly. The AMG pump is available from sales partners, plumbing wholesalers, and authorized online distributors.
What warranty does the AMG pump have?
The IBO AMG circulation pump comes with a 24-month (2-year) manufacturer’s warranty. Dambat provides warranty and post-warranty service.

