Description
AMG 25-60/130 circulation pump (230 V) – energy-efficient IBO central heating circulator with 10 operating modes
AMG is an energy-efficient circulation pump from IBO that circulates heating fluid in central heating systems. Its permanent magnet motor, differential pressure controller and ten operating modes let you precisely adapt pump operation to any system, while keeping energy consumption very low (energy efficiency class EEI ≤ 0.20).
Who it's for
- Installers and heating companies – 10 operating modes (AUTO, proportional and constant pressure, and constant speed), selected with a single button, let you adapt the pump to any system. Unions with seals are included.
- Users of domestic central heating systems – AUTO/ECO mode automatically adjusts performance to demand, maintaining thermal comfort with power consumption starting at just a few watts.
- Underfloor and radiator heating systems – proportional and constant pressure settings adjust the flow to varying heat demand in individual circuits.
- Technical service – LED indicators on the panel show the operating mode, and no external motor protection is required, making operation and maintenance easier.
Applications
- Circulation of heating fluid in domestic central heating systems.
- Constant-temperature heating systems with variable flow and systems with variable pipe temperature.
- Underfloor and radiator heating.
- Air conditioning systems and industrial circulation systems.
The 230 V AMG circulation pump must be installed with the motor shaft in a horizontal position, between shut-off valves, following the direction of flow indicated by the arrow on the housing.
AMG pump features – description and technical data
The AMG is powered by an energy-efficient permanent magnet motor and features a differential pressure controller. Select the operating mode with a single button on the panel; LEDs indicate the selected mode. Ten modes are available: AUTO self-adapting mode, three proportional pressure settings (PP I–III), three constant pressure settings (CP I–III), and three constant speed settings (CS I–III). The factory setting is CS III. This allows the pump to run quietly and efficiently, with power consumption of up to 5 W, depending on the system.
The control panel is located on the side of the motor, making operation and venting easier (activated by a button). The motor design means the system does not require a separate motor protection device. The pump is compatible with clean heating fluid: a non-corrosive liquid with no solid particles, fibers or mineral oil, and a pH of 6.5–8.5. W unions with rubber seals are included.
- Type: central heating circulation pump with a permanent magnet motor
- Number of operating modes: 10 (AUTO + proportional pressure PP I–III + constant pressure CP I–III + constant speed CS I–III)
- Power supply: 1~230 V, 50 Hz
- Energy efficiency class: EEI ≤ 0.20
- Degree of protection: IP44
- Insulation class: E
- Heating medium temperature: 2 to 110 °C
- Ambient temperature: 0 to 40 °C
- Max. system pressure: 1 MPa (10 bar)
- Pumped fluid pH: 6,5–8,5
- Motor protection: no additional (external) motor protection needs to be installed in the system
- Installation: shaft in a horizontal position; unions with seals included
IBO – 24-month (2-year) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certifications.
Frequently asked questions (FAQ) – AMG circulator pump
What is the AMG circulator pump used for?
The IBO AMG circulator pump drives the heating medium through central heating systems, maintaining a constant flow through radiators or underfloor heating loops. It is suitable for domestic, air-conditioning, and industrial circulation systems.
How many operating modes does the AMG pump have, and what are they?
The AMG offers 10 operating modes, selected using the button on the panel: self-adapting AUTO, three proportional pressure curves (PP I–III), three constant pressure curves (CP I–III), and three constant speed settings (CS I–III). The factory setting is CS III.
What does AUTO mode do on the AMG pump?
In AUTO mode, the pump automatically adjusts its output to the installation’s current demand according to the proportional pressure curve. In most installations, this allows the pump to be started without any manual adjustment.
Does the AMG pump support PWM signal control?
This version of the AMG pump does not have a PWM input. It is controlled internally using the button on the panel, with 10 modes available. A separate AMG version with PWM support is designed for control via an external PWM signal.
How do I install the AMG pump?
Install the pump with the motor shaft in a horizontal position, following the flow direction indicated by the arrow on the housing, using the included unions with seals. We recommend installing shut-off valves on both sides of the pump to make maintenance easier.
Where can I buy the AMG circulator pump?
The manufacturer does not sell directly. The AMG pump is available from trade partners, plumbing wholesalers, and authorized online distributors.
What warranty does the AMG pump come with?
The IBO AMG circulator pump comes with a 24-month (2-year) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
- Capacity [l/min.]: 55.0
- Head [m]: 6.0
- Power [kW]: 0.4
- Power supply [V]: 1~230 V
- Frequency [Hz]: 50
- Current [A]: 0.5
- Operating mode: continuous
- Insulation class: E
- Protection rating: IP44
- Dimensions H/W/L [mm]: 130/98/125
- Min. liquid temperature [°C]: 2
- Max. liquid temperature: 110
- Max. ambient temperature [°C]: 40
- Maximum tested pressure: 1.0
- Product weight [kg]: 1.8
- Power cable length (m): 0.6
- Connection [DN/inches]: 1½" x 1"
- Installation position: horizontal
- Pre-charge pressure: 0.005
- Circuit number of modes: 10
AMG 25-60/130 circulation pump (230 V) – energy-efficient IBO central heating circulator with 10 operating modes
AMG is an energy-efficient circulation pump from IBO that circulates heating fluid in central heating systems. Its permanent magnet motor, differential pressure controller and ten operating modes let you precisely adapt pump operation to any system, while keeping energy consumption very low (energy efficiency class EEI ≤ 0.20).
Who it's for
- Installers and heating companies – 10 operating modes (AUTO, proportional and constant pressure, and constant speed), selected with a single button, let you adapt the pump to any system. Unions with seals are included.
- Users of domestic central heating systems – AUTO/ECO mode automatically adjusts performance to demand, maintaining thermal comfort with power consumption starting at just a few watts.
- Underfloor and radiator heating systems – proportional and constant pressure settings adjust the flow to varying heat demand in individual circuits.
- Technical service – LED indicators on the panel show the operating mode, and no external motor protection is required, making operation and maintenance easier.
Applications
- Circulation of heating fluid in domestic central heating systems.
- Constant-temperature heating systems with variable flow and systems with variable pipe temperature.
- Underfloor and radiator heating.
- Air conditioning systems and industrial circulation systems.
The 230 V AMG circulation pump must be installed with the motor shaft in a horizontal position, between shut-off valves, following the direction of flow indicated by the arrow on the housing.
AMG pump features – description and technical data
The AMG is powered by an energy-efficient permanent magnet motor and features a differential pressure controller. Select the operating mode with a single button on the panel; LEDs indicate the selected mode. Ten modes are available: AUTO self-adapting mode, three proportional pressure settings (PP I–III), three constant pressure settings (CP I–III), and three constant speed settings (CS I–III). The factory setting is CS III. This allows the pump to run quietly and efficiently, with power consumption of up to 5 W, depending on the system.
The control panel is located on the side of the motor, making operation and venting easier (activated by a button). The motor design means the system does not require a separate motor protection device. The pump is compatible with clean heating fluid: a non-corrosive liquid with no solid particles, fibers or mineral oil, and a pH of 6.5–8.5. W unions with rubber seals are included.
- Type: central heating circulation pump with a permanent magnet motor
- Number of operating modes: 10 (AUTO + proportional pressure PP I–III + constant pressure CP I–III + constant speed CS I–III)
- Power supply: 1~230 V, 50 Hz
- Energy efficiency class: EEI ≤ 0.20
- Degree of protection: IP44
- Insulation class: E
- Heating medium temperature: 2 to 110 °C
- Ambient temperature: 0 to 40 °C
- Max. system pressure: 1 MPa (10 bar)
- Pumped fluid pH: 6,5–8,5
- Motor protection: no additional (external) motor protection needs to be installed in the system
- Installation: shaft in a horizontal position; unions with seals included
IBO – 24-month (2-year) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certifications.
Frequently asked questions (FAQ) – AMG circulator pump
What is the AMG circulator pump used for?
The IBO AMG circulator pump drives the heating medium through central heating systems, maintaining a constant flow through radiators or underfloor heating loops. It is suitable for domestic, air-conditioning, and industrial circulation systems.
How many operating modes does the AMG pump have, and what are they?
The AMG offers 10 operating modes, selected using the button on the panel: self-adapting AUTO, three proportional pressure curves (PP I–III), three constant pressure curves (CP I–III), and three constant speed settings (CS I–III). The factory setting is CS III.
What does AUTO mode do on the AMG pump?
In AUTO mode, the pump automatically adjusts its output to the installation’s current demand according to the proportional pressure curve. In most installations, this allows the pump to be started without any manual adjustment.
Does the AMG pump support PWM signal control?
This version of the AMG pump does not have a PWM input. It is controlled internally using the button on the panel, with 10 modes available. A separate AMG version with PWM support is designed for control via an external PWM signal.
How do I install the AMG pump?
Install the pump with the motor shaft in a horizontal position, following the flow direction indicated by the arrow on the housing, using the included unions with seals. We recommend installing shut-off valves on both sides of the pump to make maintenance easier.
Where can I buy the AMG circulator pump?
The manufacturer does not sell directly. The AMG pump is available from trade partners, plumbing wholesalers, and authorized online distributors.
What warranty does the AMG pump come with?
The IBO AMG circulator pump comes with a 24-month (2-year) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.

