Description
AMG 25-40/180 circulator pump (230 V) – energy-efficient central heating circulator with 10 operating modes by IBO
AMG is an energy-efficient circulator pump by IBO that drives heating fluid through central heating systems. Its permanent magnet motor, differential pressure controller and ten operating modes allow the pump to be precisely adapted to any system, while using very little energy (efficiency class EEI ≤ 0.20).
Who it's for
- Installers and heating companies – 10 operating modes (AUTO, proportional and constant pressure, and constant speed), selected with a single button, make it easy to adapt the pump to any system. Fittings with seals are included.
- Users of domestic central heating systems – AUTO/ECO mode automatically adjusts output to demand, maintaining thermal comfort with power consumption starting at just a few watts.
- Underfloor and radiator heating systems – proportional and constant pressure curves adjust the flow to match varying heat demand in individual circuits.
- Technical service – LED indicators on the panel show the operating mode, and no external motor protection is required, making operation and inspections easier.
Applications
- Circulation of heating fluid in domestic central heating systems.
- Constant-temperature heating systems with variable flow and systems with variable pipeline temperature.
- Underfloor and radiator heating.
- Air conditioning systems and industrial circulation systems.
The 230 V AMG circulator pump must be installed with the motor shaft in a horizontal position, between shut-off valves, in the direction of flow indicated by the arrow on the housing.
AMG pump features – description and technical data
The AMG is powered by an energy-efficient permanent magnet motor and features a differential pressure controller. The operating mode is selected with a single button on the panel, with the selection indicated by LEDs. There are ten modes available: AUTO self-adaptive mode, three proportional pressure curves (PP I–III), three constant pressure curves (CP I–III) and three constant speed settings (CS I–III), with CS III as the factory setting. This means the pump runs quietly and efficiently, with power consumption of up to 5 W, depending on the system.
The control panel is located on the side of the motor, making operation and venting (activated by a button) easier. The motor design means there is no need to install a separate motor protection device in the system. The pump is compatible with clean heating fluid: a non-corrosive liquid with no solid particles, fibers or mineral oil, and a pH of 6.5–8.5. W fittings with rubber seals are included.
- Type: central heating circulator pump with permanent magnet motor
- Number of operating modes: 10 (AUTO + proportional pressure PP I–III + constant pressure CP I–III + fixed speed CS I–III)
- Power supply: 1~230 V, 50 Hz
- Energy efficiency class: EEI ≤ 0,20
- Protection rating: IP44
- Insulation class: E
- Heating fluid temperature: from 2 to 110 °C
- Ambient temperature: from 0 to 40 °C
- Max. system pressure: 1 MPa (10 bar)
- pH of pumped fluid: 6,5–8,5
- Motor protection: no additional (external) motor protection needs to be installed in the system
- Installation: shaft in horizontal position; union fittings with seals included
IBO - 24-month (2-year) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
Dambat - a trusted manufacturer of pumps and hydrotechnical equipment with quality certifications.
Frequently asked questions (FAQ) - AMG circulation pump
What is the AMG circulation pump used for?
The IBO AMG circulates heating fluid in central heating systems, maintaining a steady flow through radiators or underfloor heating loops. It is suitable for residential, air conditioning, and industrial circulation systems.
How many operating modes does the AMG pump have, and what are they?
The AMG offers 10 operating modes selected using the button on the panel: adaptive AUTO mode, three proportional pressure curves (PP I–III), three constant pressure curves (CP I–III), and three fixed-speed settings (CS I–III). The factory setting is CS III.
What does AUTO mode do on the AMG pump?
W AUTO mode, the pump automatically adjusts its output to the system's current demand according to the proportional pressure curve. W most systems, this means the pump can be started without any manual adjustment.
Does the AMG pump support PWM signal control?
This version of the AMG pump does not have a PWM input - control is handled internally using the button on the panel, with 10 available modes. A separate AMG version with PWM support is designed for external PWM signal control.
How do I install the AMG pump?
Install the pump with the motor shaft horizontal, following the flow direction indicated by the arrow on the housing, and use the supplied union fittings with seals. Installing shut-off valves on both sides of the pump is recommended to make maintenance easier.
Where can I buy the AMG circulation pump?
The manufacturer does not sell directly. The AMG pump is available from trade partners, plumbing wholesalers, and authorized online distributors.
What warranty does the AMG pump have?
The IBO AMG circulation pump is covered by a 24-month (2-year) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
- Capacity [l/min.]: 42.0
- Head [m]: 4.0
- Power [kW]: 0.2
- Power supply [V]: 1~230 V
- Frequency [Hz]: 50
- Current [A]: 0.3
- Operating mode: continuous
- Insulation class: E
- Protection rating: IP44
- Dimensions H/W/L [mm]: 180/98/125
- Min. liquid temperature [°C]: 2
- Max. liquid temperature: 110
- Max. ambient temperature [°C]: 40
- Maximum tested pressure: 1.0
- Product weight [kg]: 2.0
- Power cable length (m): 0.6
- Connection [DN/inches]: 1½" x 1"
- Installation position: horizontal
- Pre-charge pressure: 0.005
- Circuit number of modes: 10
AMG 25-40/180 circulator pump (230 V) – energy-efficient central heating circulator with 10 operating modes by IBO
AMG is an energy-efficient circulator pump by IBO that drives heating fluid through central heating systems. Its permanent magnet motor, differential pressure controller and ten operating modes allow the pump to be precisely adapted to any system, while using very little energy (efficiency class EEI ≤ 0.20).
Who it's for
- Installers and heating companies – 10 operating modes (AUTO, proportional and constant pressure, and constant speed), selected with a single button, make it easy to adapt the pump to any system. Fittings with seals are included.
- Users of domestic central heating systems – AUTO/ECO mode automatically adjusts output to demand, maintaining thermal comfort with power consumption starting at just a few watts.
- Underfloor and radiator heating systems – proportional and constant pressure curves adjust the flow to match varying heat demand in individual circuits.
- Technical service – LED indicators on the panel show the operating mode, and no external motor protection is required, making operation and inspections easier.
Applications
- Circulation of heating fluid in domestic central heating systems.
- Constant-temperature heating systems with variable flow and systems with variable pipeline temperature.
- Underfloor and radiator heating.
- Air conditioning systems and industrial circulation systems.
The 230 V AMG circulator pump must be installed with the motor shaft in a horizontal position, between shut-off valves, in the direction of flow indicated by the arrow on the housing.
AMG pump features – description and technical data
The AMG is powered by an energy-efficient permanent magnet motor and features a differential pressure controller. The operating mode is selected with a single button on the panel, with the selection indicated by LEDs. There are ten modes available: AUTO self-adaptive mode, three proportional pressure curves (PP I–III), three constant pressure curves (CP I–III) and three constant speed settings (CS I–III), with CS III as the factory setting. This means the pump runs quietly and efficiently, with power consumption of up to 5 W, depending on the system.
The control panel is located on the side of the motor, making operation and venting (activated by a button) easier. The motor design means there is no need to install a separate motor protection device in the system. The pump is compatible with clean heating fluid: a non-corrosive liquid with no solid particles, fibers or mineral oil, and a pH of 6.5–8.5. W fittings with rubber seals are included.
- Type: central heating circulator pump with permanent magnet motor
- Number of operating modes: 10 (AUTO + proportional pressure PP I–III + constant pressure CP I–III + fixed speed CS I–III)
- Power supply: 1~230 V, 50 Hz
- Energy efficiency class: EEI ≤ 0,20
- Protection rating: IP44
- Insulation class: E
- Heating fluid temperature: from 2 to 110 °C
- Ambient temperature: from 0 to 40 °C
- Max. system pressure: 1 MPa (10 bar)
- pH of pumped fluid: 6,5–8,5
- Motor protection: no additional (external) motor protection needs to be installed in the system
- Installation: shaft in horizontal position; union fittings with seals included
IBO - 24-month (2-year) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
Dambat - a trusted manufacturer of pumps and hydrotechnical equipment with quality certifications.
Frequently asked questions (FAQ) - AMG circulation pump
What is the AMG circulation pump used for?
The IBO AMG circulates heating fluid in central heating systems, maintaining a steady flow through radiators or underfloor heating loops. It is suitable for residential, air conditioning, and industrial circulation systems.
How many operating modes does the AMG pump have, and what are they?
The AMG offers 10 operating modes selected using the button on the panel: adaptive AUTO mode, three proportional pressure curves (PP I–III), three constant pressure curves (CP I–III), and three fixed-speed settings (CS I–III). The factory setting is CS III.
What does AUTO mode do on the AMG pump?
W AUTO mode, the pump automatically adjusts its output to the system's current demand according to the proportional pressure curve. W most systems, this means the pump can be started without any manual adjustment.
Does the AMG pump support PWM signal control?
This version of the AMG pump does not have a PWM input - control is handled internally using the button on the panel, with 10 available modes. A separate AMG version with PWM support is designed for external PWM signal control.
How do I install the AMG pump?
Install the pump with the motor shaft horizontal, following the flow direction indicated by the arrow on the housing, and use the supplied union fittings with seals. Installing shut-off valves on both sides of the pump is recommended to make maintenance easier.
Where can I buy the AMG circulation pump?
The manufacturer does not sell directly. The AMG pump is available from trade partners, plumbing wholesalers, and authorized online distributors.
What warranty does the AMG pump have?
The IBO AMG circulation pump is covered by a 24-month (2-year) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.

