Description
6" SPINOX 77-8B (26 kW, 400 V) – multistage stainless-steel submersible pump with an IPRO oil-filled motor
The 6" SPINOX with an IPRO oil-filled motor is a multistage submersible pump made entirely made of AISI 304 stainless steel, designed for drawing and pumping technically clean raw water raw water from drilled deep-water intakes with a minimum internal diameter of 160 mm. The pump is powered by an IPRO IOM oil-filled motor. The series includes a range of models with varying hydraulic parameters and a wide power range, allowing the model to be selected to meet the requirements of a specific, high-capacity installation.
Who is it for
- Farms and orchards with high water demand – the capacity of 415 l/min allows extensive irrigation systems for fields, orchards, and covered crops to be supplied from a single intake.
- Managers of multifamily buildings and housing estates – a single deep-water intake can supply several buildings or an entire housing community with utility water in locations without access to the municipal network.
- Water supply and fire protection system contractors – the increased flow rate is suitable for systems requiring large quantities of water, including hydrant systems and fire water tanks.
- Industrial plants and companies carrying out dewatering work – drawing technical water for process requirements and dewatering excavations and areas with high groundwater levels.
Applications
- Drawing and pumping raw water from larger-diameter drilled deep wells before the treatment process.
- Supplying water to multifamily buildings, housing estates, and farms with high water demand.
- Supplying extensive irrigation and sprinkler systems, as well as lowering the groundwater level.
- Water supply and fire protection systems requiring increased flow capacity.
Depending on the output of the selected model, 6" SPINOX pumps with an IPRO oil-filled motor is suitable both for supplying a single larger facility and for installations serving several buildings or larger-scale irrigation systems. The submersible pump The 6" SPINOX 77-8B (26 kW, 400 V) with an IPRO oil-filled motor is individually selected for parameters of a specific well – its depth, diameter, and required capacity.
The 6" SPINOX pump is not a water treatment device and does not constitute confirmation of the its suitability for human consumption – if the water is to be used for drinking, cooking or other household purposes, an appropriate water treatment system must be provided, and quality control at the point of collection.
Features, description, and technical data
The 6" SPINOX with an IPRO oil-filled motor is a multistage submersible pump in which all key structural components – the suction and discharge connections, housing, shaft, impeller, and diffuser – are made of AISI 304 stainless steel. This design provides increased resistance to wear and a long service life when operating in contact with raw water, which may may contain fine mineral contaminants. The mechanical seal is made using a ceramic / SiC / NBR arrangement. The pump is factory-equipped with a check valve, preventing water from flowing back into the discharge pipeline after the pump stops.
The drive is provided by an IPRO IOM oil-filled motor, cooled and lubricated by the oil located in a sealed motor chamber. The length of the power cable is selected for the specific depending on the device variant and well depth. The pump operates continuously in a vertical position or horizontal, at a maximum pumped liquid temperature of 35°C and insulation class F.
- Device type: multistage submersible pump
- Motor IPRO: IPRO (IOM oil-filled motor)
- Model: 6" SPINOX 77-8B
- Motor power: 26 kW
- Power supply: 400 V
- Motor design: oil-filled
- Set diameter: 131 mm (with a 4" motor) / 145 mm (with a 6" motor)
- Minimum well diameter: 160 mm
- Materials: suction/discharge connection, housing, shaft, impeller, diffuser – AISI 304 stainless steel; mechanical seal – ceramic / SiC / NBR
- Motor speed: 2850 rpm
- Max. temperature of the pumped liquid: 35°C
- Protection rating: IP68
- Operating mode: continuous
- Working position: vertical / horizontal
- Built-in check valve: yes
Technical data may vary depending on the production batch – before installation, we recommend checking the device’s nameplate.
IPRO – 36 months (3 years) manufacturer’s warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certifications.
Frequently asked questions (FAQ) – 6" SPINOX submersible pump with an IPRO oil-filled motor
What is the 6" SPINOX submersible pump with an IPRO oil-filled motor used for?
The 6" SPINOX with an IPRO oil-filled motor is a multistage submersible pump designed for drawing and pumping raw / untreated water from larger-diameter drilled deep wells, diameter, before the treatment process – including supplying multi-family buildings, farms and water supply and fire protection systems.
How do I choose the right 6" SPINOX model for my well?
Model selection depends on the well’s depth and diameter and the required system capacity – the series includes several hydraulic subcategories with different maximum capacities and power ratings.
What motors are available for the 6" SPINOX submersible pump?
The 6" SPINOX hydraulics can be combined with a 4" or 6" diameter motor, depending on the model – with an IPRO WMC water-filled motor, an IPRO IOM oil-filled motor, or an oil-filled an Italian IBO Italy motor. The specific variant (motor type and diameter) is indicated by the product name.
How can I protect the 6" SPINOX pump against dry running?
The pump can work with dry-run protection that operates without the need to install additional probes or sensors directly in the well, simplifying installation compared with solutions requiring separate sensor wiring.
Where can I buy the 6" SPINOX submersible pump manufactured by Dambat?
Dambat does not sell directly. The 6" SPINOX pump is available from our trade partners, installation wholesalers, and authorized distributors online.
What warranty terms apply to the 6" SPINOX pump with an IPRO oil-filled motor?
IPRO – 36 months (3 years) manufacturer’s warranty. Warranty and post-warranty service provided by Dambat.
- Diameter: 8”,
- Lift: 152.0 m,
- Capacity: 1667.0 l/min.,
- Power: 26.0 kW,
- Power supply: 300–400 V,
- Frequency: 50 Hz,
- Current: 56.0 A,
- Motor speed: 2850 rpm,
- Insulation class: F,
- Operating mode: continuous,
- Protection rating: IP68,
- Connection [DN/cale]: 5,
- Operating position: Vertical/Horizontal,
- Max. liquid temperature: 35°C,
- Max. number of starts per hour: ,
- Max. immersion depth: 150 m,
- Power cable length: 1.5 m,
- Diameter/height dimensions: 168/2681 mm,
- Weight: 137.5 kg,
----------
MATERIALS
• Suction/discharge connection: AISI 304 stainless steel,
• Housing: AISI 304 stainless steel,
• Shaft and rotor: AISI 304 stainless steel,
• Impeller: AISI 304 stainless steel,
• Diffuser: AISI 304 stainless steel,
• Mechanical seal: Ceramic/SiC/NBR,
• Water-cooled motor.
6" SPINOX 77-8B (26 kW, 400 V) – multistage stainless-steel submersible pump with an IPRO oil-filled motor
The 6" SPINOX with an IPRO oil-filled motor is a multistage submersible pump made entirely made of AISI 304 stainless steel, designed for drawing and pumping technically clean raw water raw water from drilled deep-water intakes with a minimum internal diameter of 160 mm. The pump is powered by an IPRO IOM oil-filled motor. The series includes a range of models with varying hydraulic parameters and a wide power range, allowing the model to be selected to meet the requirements of a specific, high-capacity installation.
Who is it for
- Farms and orchards with high water demand – the capacity of 415 l/min allows extensive irrigation systems for fields, orchards, and covered crops to be supplied from a single intake.
- Managers of multifamily buildings and housing estates – a single deep-water intake can supply several buildings or an entire housing community with utility water in locations without access to the municipal network.
- Water supply and fire protection system contractors – the increased flow rate is suitable for systems requiring large quantities of water, including hydrant systems and fire water tanks.
- Industrial plants and companies carrying out dewatering work – drawing technical water for process requirements and dewatering excavations and areas with high groundwater levels.
Applications
- Drawing and pumping raw water from larger-diameter drilled deep wells before the treatment process.
- Supplying water to multifamily buildings, housing estates, and farms with high water demand.
- Supplying extensive irrigation and sprinkler systems, as well as lowering the groundwater level.
- Water supply and fire protection systems requiring increased flow capacity.
Depending on the output of the selected model, 6" SPINOX pumps with an IPRO oil-filled motor is suitable both for supplying a single larger facility and for installations serving several buildings or larger-scale irrigation systems. The submersible pump The 6" SPINOX 77-8B (26 kW, 400 V) with an IPRO oil-filled motor is individually selected for parameters of a specific well – its depth, diameter, and required capacity.
The 6" SPINOX pump is not a water treatment device and does not constitute confirmation of the its suitability for human consumption – if the water is to be used for drinking, cooking or other household purposes, an appropriate water treatment system must be provided, and quality control at the point of collection.
Features, description, and technical data
The 6" SPINOX with an IPRO oil-filled motor is a multistage submersible pump in which all key structural components – the suction and discharge connections, housing, shaft, impeller, and diffuser – are made of AISI 304 stainless steel. This design provides increased resistance to wear and a long service life when operating in contact with raw water, which may may contain fine mineral contaminants. The mechanical seal is made using a ceramic / SiC / NBR arrangement. The pump is factory-equipped with a check valve, preventing water from flowing back into the discharge pipeline after the pump stops.
The drive is provided by an IPRO IOM oil-filled motor, cooled and lubricated by the oil located in a sealed motor chamber. The length of the power cable is selected for the specific depending on the device variant and well depth. The pump operates continuously in a vertical position or horizontal, at a maximum pumped liquid temperature of 35°C and insulation class F.
- Device type: multistage submersible pump
- Motor IPRO: IPRO (IOM oil-filled motor)
- Model: 6" SPINOX 77-8B
- Motor power: 26 kW
- Power supply: 400 V
- Motor design: oil-filled
- Set diameter: 131 mm (with a 4" motor) / 145 mm (with a 6" motor)
- Minimum well diameter: 160 mm
- Materials: suction/discharge connection, housing, shaft, impeller, diffuser – AISI 304 stainless steel; mechanical seal – ceramic / SiC / NBR
- Motor speed: 2850 rpm
- Max. temperature of the pumped liquid: 35°C
- Protection rating: IP68
- Operating mode: continuous
- Working position: vertical / horizontal
- Built-in check valve: yes
Technical data may vary depending on the production batch – before installation, we recommend checking the device’s nameplate.
IPRO – 36 months (3 years) manufacturer’s warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certifications.
Frequently asked questions (FAQ) – 6" SPINOX submersible pump with an IPRO oil-filled motor
What is the 6" SPINOX submersible pump with an IPRO oil-filled motor used for?
The 6" SPINOX with an IPRO oil-filled motor is a multistage submersible pump designed for drawing and pumping raw / untreated water from larger-diameter drilled deep wells, diameter, before the treatment process – including supplying multi-family buildings, farms and water supply and fire protection systems.
How do I choose the right 6" SPINOX model for my well?
Model selection depends on the well’s depth and diameter and the required system capacity – the series includes several hydraulic subcategories with different maximum capacities and power ratings.
What motors are available for the 6" SPINOX submersible pump?
The 6" SPINOX hydraulics can be combined with a 4" or 6" diameter motor, depending on the model – with an IPRO WMC water-filled motor, an IPRO IOM oil-filled motor, or an oil-filled an Italian IBO Italy motor. The specific variant (motor type and diameter) is indicated by the product name.
How can I protect the 6" SPINOX pump against dry running?
The pump can work with dry-run protection that operates without the need to install additional probes or sensors directly in the well, simplifying installation compared with solutions requiring separate sensor wiring.
Where can I buy the 6" SPINOX submersible pump manufactured by Dambat?
Dambat does not sell directly. The 6" SPINOX pump is available from our trade partners, installation wholesalers, and authorized distributors online.
What warranty terms apply to the 6" SPINOX pump with an IPRO oil-filled motor?
IPRO – 36 months (3 years) manufacturer’s warranty. Warranty and post-warranty service provided by Dambat.