6" SPINOX 60-8B (13 kW, 400 V) - multistage stainless steel submersible pump, IPRO water-filled motor
The 6" SPINOX with an IPRO water-filled motor is a multistage submersible pump made entirely of AISI 304 stainless steel, designed to draw and pump clean, untreated water from drilled deep wells with a minimum internal diameter of 160 mm. The pump is driven by an IPRO WMC water-filled motor. The series includes a range of models with differing hydraulic parameters and a wide range of power ratings, making it possible to select a model to suit the needs of a specific high-capacity installation.
Who it's for
-
Farms and orchards with high water demand – a capacity of 415 l/min makes it possible to supply extensive irrigation systems for fields, orchards, and covered crops from a single source.
-
Managers of multi-family buildings and housing estates – a single deep well can supply water to several buildings or an entire community in locations without access to the municipal water network.
-
Water supply and fire protection system contractors – the increased flow rate is suitable for systems requiring large volumes of water, including hydrant systems and fire water tanks.
-
Industrial plants and companies carrying out dewatering work – drawing technical water for processes and dewatering excavations and sites with high groundwater levels.
Applications
- Drawing and pumping untreated water from large-diameter drilled deep wells before treatment.
- Supplying water to multi-family buildings, housing estates, and farms with high demand.
- Supplying extensive irrigation and sprinkler systems, as well as lowering groundwater levels.
- Water supply and fire protection systems requiring increased flow rates.
WDepending on the capacity of the selected model, 6" SPINOX pumps with IPRO water-filled motors are suitable both for supplying a single large facility and for installations serving several buildings or large-scale irrigation systems. The 6" SPINOX 60-8B submersible pump (13 kW, 400 V) with an IPRO water-filled motor is selected individually to match the parameters of the specific well—its depth, diameter, and required capacity.
The 6" SPINOX pump is not a water treatment device and does not certify that the water
is suitable for human consumption. If the water is to be used for drinking,
cooking or other household purposes, an appropriate water treatment system and
water quality monitoring at the point of use must be provided.
Features, description and technical data
The 6" SPINOX with an IPRO water-filled motor is a multistage submersible pump whose key
structural components – the suction and discharge ports, housing, shaft, impeller and
diffuser – are all made of AISI 304 stainless steel. This construction provides increased
wear resistance and a long service life when operating in contact with raw water, which may
contain fine mineral impurities. The mechanical seal is made of ceramic / SiC / NBR. The
pump is factory-fitted with a check valve to prevent water from flowing back through the
discharge pipe after the pump stops.
Powered by an IPRO WMC water-filled motor. The power cable length is selected
for the specific unit variant and well depth. The pump operates in continuous mode,
in a vertical or horizontal position, at a maximum pumped liquid temperature of 35°C
and insulation class F.
- Device type: multistage submersible pump
- Motor brand: IPRO (WMC water-filled motor)
- Model: 6" SPINOX 60-8B
- Motor power: 13 kW
- Power supply: 400 V
- Motor design: water-filled
- Unit diameter: 131 mm (with 4" motor) / 145 mm (with 6" motor)
- Minimum well diameter: 160 mm
- Materials: suction/discharge port, housing, shaft, impeller, diffuser – AISI 304 stainless steel; mechanical seal – ceramic / SiC / NBR
- Motor speed: 2850 rpm
- Max. pumped liquid temperature: 35°C
- Protection rating: IP68
- Operating mode: continuous
- Operating position: vertical / horizontal
- Built-in check valve: yes
Technical data may vary by production batch – before installation, we recommend checking the device’s rating plate.
IPRO – 36 months (3 years) manufacturer’s warranty. Dambat provides warranty and post-warranty service.
Dambat – a trusted manufacturer of pumps and water engineering equipment with quality certifications.
Frequently Asked Questions (FAQ) – 6" SPINOX submersible pump with an IPRO water-filled motor
What is the 6" SPINOX submersible pump with an IPRO water-filled motor used for?
The 6" SPINOX with an IPRO water-filled motor is a multistage submersible pump designed to draw
and pump raw / untreated water from larger-diameter deep drilled wells before treatment – including for
supplying multifamily buildings, farms, and water supply and fire protection systems.
How do I choose the right 6" SPINOX model for my well?
The model selection depends on the well’s depth and diameter, as well as the required system capacity –
the series includes several hydraulic subcategories with different maximum capacities and power ratings.
Which motors are available for the 6" SPINOX submersible pump?
The 6" SPINOX hydraulics can be paired with a 4" or 6" motor, depending on the
model: an IPRO WMC water-filled motor, an IPRO IOM oil-filled motor, or an oil-filled motor
from the Italian brand IBO Italy. The specific variant (motor type and diameter) is indicated
in the product name.
How do I protect the 6" SPINOX pump against dry running?
The pump can be used with dry-run protection that operates without
installing additional probes or sensors directly in the well, simplifying
installation compared with solutions that require separate sensor wiring.
Where can I buy a 6" SPINOX submersible pump manufactured by Dambat?
Dambat does not sell directly. The 6" SPINOX pump is available from our
sales partners, plumbing wholesalers, and authorized online distributors.
What warranty terms apply to the 6" SPINOX pump with an IPRO water-filled motor?
IPRO – 36 months (3 years) manufacturer’s warranty. Dambat provides warranty and post-warranty service.
