6" SPINOX 60-6 (11 kW, 400 V) - multistage stainless steel submersible pump, IPRO oil-filled motor
The 6" SPINOX with an IPRO oil-filled motor is a multistage submersible pump made entirely
of AISI 304 stainless steel, designed for drawing and pumping technically clean raw water
from drilled deep wells with a minimum internal diameter of 160 mm. The pump is
powered by an IPRO IOM oil-filled motor. The series includes a range of models with varying
hydraulic parameters and a wide power range, allowing you to select a model to meet the
needs of a specific high-capacity installation.
Who it's for
-
Farms and orchards with high water demand – a capacity of 415 l/min makes it possible to supply extensive irrigation systems for fields, orchards and covered crops from a single water source.
-
Managers of multi-family buildings and housing estates – a single deep well can supply water to several buildings or an entire community in locations without access to the municipal water network.
-
Water supply and fire protection system contractors – the increased flow rate is suitable for systems requiring large quantities of water, including hydrant systems and fire protection tanks.
-
Industrial plants and companies carrying out drainage work – drawing technical water for processes and dewatering excavations and areas with high groundwater levels.
Applications
- Drawing and pumping raw water from larger-diameter drilled deep wells before treatment.
- Supplying water to multi-family buildings, housing estates and farms with high water demand.
- Supplying extensive irrigation and sprinkler systems, and lowering groundwater levels.
- Water supply and fire protection systems requiring increased flow rates.
WDepending on the performance of the selected model, 6" SPINOX pumps with IPRO oil-filled motors
are suitable for supplying a single larger facility as well as installations serving several buildings or larger-scale irrigation systems. The 6" SPINOX 60-6 submersible pump (11 kW, 400 V) with an IPRO oil-filled motor is individually selected to match the parameters of the specific well – its depth, diameter and required capacity.
The 6" SPINOX pump is not a water treatment device and does not certify that the water is suitable for human consumption. If the water is to be used for drinking, cooking, or other household purposes, an appropriate water treatment system must be provided, along with water quality monitoring at the point of use.
Features, description and technical data
The 6" SPINOX with an IPRO oil-filled motor is a multistage submersible pump in which all key structural components – the suction and discharge connections, housing, shaft, impeller, and diffuser – are made of AISI 304 stainless steel. This construction provides increased wear resistance and a long service life when operating in contact with raw water, which may contain fine mineral contaminants. The mechanical seal uses a ceramic / SiC / NBR arrangement. The pump is factory-equipped with a check valve to prevent water from flowing back through the discharge pipe after the pump stops.
The pump is driven by an IPRO IOM oil-filled motor, cooled and lubricated by oil in a sealed motor chamber. The power cable length is selected for the specific device version and well depth. The pump operates continuously, in a vertical or horizontal position, at a maximum pumped liquid temperature of 35°C and insulation class F.
- Device type: multistage submersible pump
- Motor IPRO: IPRO (IOM oil-filled motor)
- Model: 6" SPINOX 60-6
- Motor power: 11 kW
- Power supply: 400 V
- Motor construction: oil-filled
- Unit diameter: 131 mm (with 4" motor) / 145 mm (with 6" motor)
- Minimum well diameter: 160 mm
- Materials: suction/discharge connection, housing, shaft, impeller, diffuser – AISI 304 stainless steel; mechanical seal – ceramic / SiC / NBR
- Motor speed: 2850 rpm
- Max. temperature of pumped liquid: 35°C
- Protection rating: IP68
- Operating mode: continuous
- Operating position: vertical / horizontal
- Built-in check valve: yes
Technical specifications may vary by production batch. Before installation, we recommend checking the device's nameplate.
IPRO – 36 months (3 years) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and water engineering equipment with quality certifications.
Frequently asked questions (FAQ) – 6" SPINOX submersible pump with an IPRO oil-filled motor
What is the 6" SPINOX submersible pump with an IPRO oil-filled motor used for?
The 6" SPINOX with an IPRO oil-filled motor is a multistage submersible pump designed to draw and pump raw/untreated water from larger-diameter drilled deep wells before treatment. It is suitable, among other uses, for supplying multi-family buildings, farms, water supply systems and fire protection systems.
How do I choose the right 6" SPINOX model for my well?
Choosing a model depends on the well's depth and diameter, as well as the required system output. The series includes several hydraulic subcategories with different maximum capacities and power ratings.
What motors are available for the 6" SPINOX submersible pump?
The 6" SPINOX hydraulics can be paired with a 4" or 6" motor, depending on the model: an IPRO WMC water-filled motor, an IPRO IOM oil-filled motor, or an oil-filled motor from the Italian brand IBO Italy. The specific variant (motor type and diameter) is indicated in the product name.
How can I protect the 6" SPINOX pump from running dry?
The pump can be used with dry-run protection that works without installing additional probes or sensors directly in the well, simplifying installation compared with solutions that require separate sensor wiring.
Where can I buy the 6" SPINOX submersible pump manufactured by Dambat?
Dambat does not sell directly. The 6" SPINOX pump is available from our sales partners, plumbing wholesalers and authorized online distributors.
What are the warranty terms for the 6" SPINOX pump with an IPRO oil-filled motor?
IPRO – 36 months (3 years) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
