Description
6" SPINOX 60-4 (7.5 kW, 400 V) – multistage stainless steel submersible pump with an IPRO water-filled motor
The 6" SPINOX with an IPRO water-filled motor is a multistage submersible pump made entirely of AISI 304 stainless steel, designed for drawing and pumping technically clean raw water raw water from drilled deep-water intakes with a minimum internal diameter of 160 mm. The pump is driven by an IPRO WMC water-filled motor. The series includes a range of models with varying hydraulic parameters and a wide power range, allowing the model to be matched to of the requirements of a specific, high-capacity installation.
For whom
- Farms and orchards with high water demand – a capacity of 415 l/min makes it possible to supply extensive irrigation systems for fields, orchards, and protected crops from a single intake.
- Managers of multi-family buildings and housing estates – a single deep-well intake can supply several buildings or an entire community with domestic water in locations without access to the municipal network.
- Water supply and fire protection system contractors – the increased flow rate is suitable for systems requiring large quantities of water, including hydrant systems and fire water tanks.
- Industrial plants and companies carrying out drainage works – drawing technical water for process requirements and draining excavations and areas with high groundwater levels.
Applications
- Drawing and pumping raw water from larger-diameter drilled deep wells before treatment.
- Supplying water to multi-family buildings, housing estates, and farms with high demand.
- Supplying extensive irrigation and sprinkler systems and lowering the groundwater level.
- Water supply and fire protection systems requiring increased flow capacity.
Depending on the capacity of the selected model, 6" SPINOX pumps with an IPRO water-filled motor is suitable both for supplying a single larger facility and for installations serving several buildings or larger-scale irrigation systems. The submersible pump 6" SPINOX 60-4 (7.5 kW, 400 V) with an IPRO water-filled motor is individually selected for the parameters of a specific well – its depth, diameter and required capacity.
The 6" SPINOX pump is not a water treatment device and does not constitute confirmation of its suitability for human consumption – if the water is to be used for drinking, cooking or other household purposes, an appropriate treatment system must be provided, and quality control at the point of use.
Features, description and technical data
The 6" SPINOX with an IPRO water-filled motor is a multistage submersible pump in which all key structural components – the suction and discharge nozzles, housing, shaft, impeller and the diffuser – are made of AISI 304 stainless steel. This design provides increased providing resistance to wear and a long service life when operating in contact with raw water, which may may contain fine mineral impurities. The mechanical seal is made using a ceramic / SiC / NBR arrangement. The pump is factory-equipped with a check valve, preventing water from flowing back through the discharge pipeline after the pump stops.
The pump is driven by an IPRO WMC water-filled motor. The power cable length is selected depending on the specific device variant and well depth. The pump operates continuously, in a vertical or horizontal position, at a maximum pumped liquid temperature of 35°C and insulation class F.
- Device type: multistage submersible pump
- Motor brand: IPRO (WMC water-filled motor)
- Model: 6" SPINOX 60-4
- Motor power: 7.5 kW
- Power supply: 400 V
- Motor design: water-filled
- Unit diameter: 131 mm (with a 4" motor) / 145 mm (with a 6" motor)
- Minimum well diameter: 160 mm
- Materials: suction/discharge nozzle, housing, shaft, impeller, diffuser – AISI 304 stainless steel; mechanical seal – ceramic / SiC / NBR
- Motor speed: 2850 rpm
- Max. pumped liquid temperature: 35°C
- Protection rating: IP68
- Operating mode: continuous
- Operating position: vertical / horizontal
- Built-in check valve: yes
Technical specifications may vary depending on the production batch – before installation, we recommend checking the device’s rating plate.
IPRO – 36 months (3 years) manufacturer’s warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently Asked Questions (FAQ) – 6" SPINOX deep-well pump with an IPRO water-filled motor
What is the 6" SPINOX deep-well pump with an IPRO water-filled motor used for?
The 6" SPINOX with an IPRO water-filled motor is a multistage deep-well pump designed for drawing and pumping raw/untreated water from deeper drilled wells with a larger diameter, before the treatment process – including for supplying multi-family buildings, farms and water-supply and fire-protection systems.
How do I choose the right 6" SPINOX model for my well?
Model selection depends on the well’s depth and diameter and the required system flow rate – the series includes several hydraulic subcategories with different maximum flow rates and power ratings.
What motors are available for the 6" SPINOX deep-well pump?
The 6" SPINOX hydraulics can be paired with a 4" or 6" motor, depending on the model – with an IPRO WMC water-filled motor, an IPRO IOM oil-filled motor, or an oil-filled a motor from the Italian brand IBO Italy. The specific variant (motor type and diameter) is indicated in the product name.
How can I protect the 6" SPINOX pump from dry running?
The pump can work with a dry-running protection system that operates without the need to install additional probes or sensors directly in the well, simplifying installation compared with solutions requiring separate sensor wiring.
Where can I buy the 6" SPINOX deep-well pump manufactured by Dambat?
Dambat does not sell directly. The 6" SPINOX pump is available from our sales partners, plumbing wholesalers, and authorized distributors online.
What warranty terms apply to the 6" SPINOX pump with an IPRO water-filled motor?
IPRO – 36 months (3 years) manufacturer’s warranty. Warranty and post-warranty service provided by Dambat.
- Diameter: 6”,
- Lift: 56.0 m,
- Capacity: 1365.0 l/min.,
- Power: 7.5 kW,
- Power supply: 300–400 V,
- Frequency: 50 Hz,
- Current: 18.5 A,
- Motor speed: 2900 rpm,
- Insulation class: F,
- Operating mode: continuous,
- Protection rating: IP68,
- Connection [DN/cale]: 4,
- Operating position: Vertical/Horizontal,
- Max. liquid temperature: 25°C,
- Max. number of starts per hour: 20,
- Max. immersion depth: 150 m,
- Power cable length: 1.5 m,
- Diameter/height dimensions: 145/1507 mm,
- Weight: 67.6 kg,
----------
MATERIALS
• Suction/discharge connection: AISI 304 stainless steel,
• Housing: AISI 304 stainless steel,
• Shaft and rotor: AISI 304 stainless steel,
• Impeller: AISI 304 stainless steel,
• Diffuser: AISI 304 stainless steel,
• Mechanical seal: Ceramic/SiC/NBR,
• Oil-cooled motor.
6" SPINOX 60-4 (7.5 kW, 400 V) – multistage stainless steel submersible pump with an IPRO water-filled motor
The 6" SPINOX with an IPRO water-filled motor is a multistage submersible pump made entirely of AISI 304 stainless steel, designed for drawing and pumping technically clean raw water raw water from drilled deep-water intakes with a minimum internal diameter of 160 mm. The pump is driven by an IPRO WMC water-filled motor. The series includes a range of models with varying hydraulic parameters and a wide power range, allowing the model to be matched to of the requirements of a specific, high-capacity installation.
For whom
- Farms and orchards with high water demand – a capacity of 415 l/min makes it possible to supply extensive irrigation systems for fields, orchards, and protected crops from a single intake.
- Managers of multi-family buildings and housing estates – a single deep-well intake can supply several buildings or an entire community with domestic water in locations without access to the municipal network.
- Water supply and fire protection system contractors – the increased flow rate is suitable for systems requiring large quantities of water, including hydrant systems and fire water tanks.
- Industrial plants and companies carrying out drainage works – drawing technical water for process requirements and draining excavations and areas with high groundwater levels.
Applications
- Drawing and pumping raw water from larger-diameter drilled deep wells before treatment.
- Supplying water to multi-family buildings, housing estates, and farms with high demand.
- Supplying extensive irrigation and sprinkler systems and lowering the groundwater level.
- Water supply and fire protection systems requiring increased flow capacity.
Depending on the capacity of the selected model, 6" SPINOX pumps with an IPRO water-filled motor is suitable both for supplying a single larger facility and for installations serving several buildings or larger-scale irrigation systems. The submersible pump 6" SPINOX 60-4 (7.5 kW, 400 V) with an IPRO water-filled motor is individually selected for the parameters of a specific well – its depth, diameter and required capacity.
The 6" SPINOX pump is not a water treatment device and does not constitute confirmation of its suitability for human consumption – if the water is to be used for drinking, cooking or other household purposes, an appropriate treatment system must be provided, and quality control at the point of use.
Features, description and technical data
The 6" SPINOX with an IPRO water-filled motor is a multistage submersible pump in which all key structural components – the suction and discharge nozzles, housing, shaft, impeller and the diffuser – are made of AISI 304 stainless steel. This design provides increased providing resistance to wear and a long service life when operating in contact with raw water, which may may contain fine mineral impurities. The mechanical seal is made using a ceramic / SiC / NBR arrangement. The pump is factory-equipped with a check valve, preventing water from flowing back through the discharge pipeline after the pump stops.
The pump is driven by an IPRO WMC water-filled motor. The power cable length is selected depending on the specific device variant and well depth. The pump operates continuously, in a vertical or horizontal position, at a maximum pumped liquid temperature of 35°C and insulation class F.
- Device type: multistage submersible pump
- Motor brand: IPRO (WMC water-filled motor)
- Model: 6" SPINOX 60-4
- Motor power: 7.5 kW
- Power supply: 400 V
- Motor design: water-filled
- Unit diameter: 131 mm (with a 4" motor) / 145 mm (with a 6" motor)
- Minimum well diameter: 160 mm
- Materials: suction/discharge nozzle, housing, shaft, impeller, diffuser – AISI 304 stainless steel; mechanical seal – ceramic / SiC / NBR
- Motor speed: 2850 rpm
- Max. pumped liquid temperature: 35°C
- Protection rating: IP68
- Operating mode: continuous
- Operating position: vertical / horizontal
- Built-in check valve: yes
Technical specifications may vary depending on the production batch – before installation, we recommend checking the device’s rating plate.
IPRO – 36 months (3 years) manufacturer’s warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently Asked Questions (FAQ) – 6" SPINOX deep-well pump with an IPRO water-filled motor
What is the 6" SPINOX deep-well pump with an IPRO water-filled motor used for?
The 6" SPINOX with an IPRO water-filled motor is a multistage deep-well pump designed for drawing and pumping raw/untreated water from deeper drilled wells with a larger diameter, before the treatment process – including for supplying multi-family buildings, farms and water-supply and fire-protection systems.
How do I choose the right 6" SPINOX model for my well?
Model selection depends on the well’s depth and diameter and the required system flow rate – the series includes several hydraulic subcategories with different maximum flow rates and power ratings.
What motors are available for the 6" SPINOX deep-well pump?
The 6" SPINOX hydraulics can be paired with a 4" or 6" motor, depending on the model – with an IPRO WMC water-filled motor, an IPRO IOM oil-filled motor, or an oil-filled a motor from the Italian brand IBO Italy. The specific variant (motor type and diameter) is indicated in the product name.
How can I protect the 6" SPINOX pump from dry running?
The pump can work with a dry-running protection system that operates without the need to install additional probes or sensors directly in the well, simplifying installation compared with solutions requiring separate sensor wiring.
Where can I buy the 6" SPINOX deep-well pump manufactured by Dambat?
Dambat does not sell directly. The 6" SPINOX pump is available from our sales partners, plumbing wholesalers, and authorized distributors online.
What warranty terms apply to the 6" SPINOX pump with an IPRO water-filled motor?
IPRO – 36 months (3 years) manufacturer’s warranty. Warranty and post-warranty service provided by Dambat.