6" SPINOX 60-4 (7.5 kW, 400 V) - multistage stainless steel submersible pump, IPRO water-filled motor
The 6" SPINOX with an IPRO water-filled motor is a multistage submersible pump made entirely of AISI 304 stainless steel, designed for drawing and pumping clean raw water from drilled deep wells with a minimum internal diameter of 160 mm. The pump is driven by an IPRO WMC water-filled motor. The series includes a range of models with different hydraulic parameters and a wide range of power ratings, allowing you to select a model to meet the needs of a specific high-capacity installation.
Who it's for
-
Farms and orchards with high water demand - a capacity of 415 l/min allows extensive irrigation systems for fields, orchards and covered crops to be supplied from a single source.
-
Managers of multi-family buildings and housing estates - a single deep well can supply water to several buildings or an entire residential community in locations without access to the municipal water network.
-
Water supply and fire protection system installers - the increased flow rate is suitable for systems that require large volumes of water, including hydrant systems and fire water tanks.
-
Industrial plants and companies carrying out dewatering work - drawing process water and dewatering excavations and areas with high groundwater levels.
Applications
- Drawing and pumping raw water from larger-diameter drilled deep wells before treatment.
- Water supply for multi-family buildings, housing estates and farms with high demand.
- Supplying extensive irrigation and sprinkler systems, and lowering groundwater levels.
- Water supply and fire protection systems requiring increased flow rates.
Depending on the output of the selected model, 6" SPINOX pumps with IPRO water-cooled motors are suitable for supplying a single, larger facility as well as installations serving several buildings or larger-scale irrigation systems.
The 6" SPINOX 60-4 submersible pump (7.5 kW, 400 V) with an IPRO water-cooled motor is selected individually to match the specifications of the specific well – its depth, diameter, and required output.
The 6" SPINOX pump is not a water treatment device and does not certify that the water
is suitable for human consumption. If the water is to be used for drinking,
cooking or other domestic purposes, an appropriate water treatment system and
water quality monitoring at the point of use must be provided.
Features, description and technical data
The 6" SPINOX with an IPRO water-filled motor is a multistage submersible pump whose
key structural components – suction and discharge connections, housing, shaft, impeller and
diffuser – are all made of AISI 304 stainless steel. This design provides greater
wear resistance and a long service life when operating in contact with raw water, which may
contain fine mineral impurities. The mechanical seal uses a ceramic / SiC / NBR configuration.
The pump is factory-fitted with a check valve to prevent water from flowing back through the
discharge pipe after the pump stops.
Powered by an IPRO WMC water-filled motor. The power cable length is selected
for the specific device configuration and well depth. The pump operates continuously,
in a vertical or horizontal position, at a maximum pumped liquid temperature of 35°C
and insulation class F.
- Device type: multistage submersible pump
- Motor brand: IPRO (WMC water-filled motor)
- Model: 6" SPINOX 60-4
- Motor power: 7.5 kW
- Power supply: 400 V
- Motor design: water-filled
- Unit diameter: 131 mm (with 4" motor) / 145 mm (with 6" motor)
- Minimum well diameter: 160 mm
- Materials: suction/discharge connection, housing, shaft, impeller, diffuser – AISI 304 stainless steel; mechanical seal – ceramic / SiC / NBR
- Motor speed: 2850 rpm
- Max. pumped liquid temperature: 35°C
- Protection rating: IP68
- Operating mode: continuous
- Operating position: vertical / horizontal
- Built-in check valve: yes
Technical data may vary depending on the production batch. Before installation, we recommend checking the device's nameplate.
IPRO - 36 months (3 years) manufacturer's warranty. Warranty and post-warranty service provided by Dambat.
Dambat - a trusted manufacturer of pumps and hydrotechnical equipment with quality certifications.
Frequently asked questions (FAQ) - 6" SPINOX submersible pump with an IPRO water-filled motor
What is the 6" SPINOX submersible pump with an IPRO water-filled motor used for?
The 6" SPINOX with an IPRO water-filled motor is a multistage submersible pump designed to draw and pump raw / untreated water from larger-diameter deep boreholes before treatment. It is suitable, among other uses, for supplying multi-family buildings, farms, and water supply and fire protection systems.
How do I choose the right 6" SPINOX model for my well?
The model you choose depends on the depth and diameter of the well and the system's required capacity. The series includes several hydraulic subcategories with different maximum capacities and power ratings.
What motors are available for the 6" SPINOX submersible pump?
The 6" SPINOX hydraulics can be paired with a 4" or 6" motor, depending on the model: an IPRO WMC water-filled motor, an IPRO IOM oil-filled motor, or an oil-filled motor from the Italian brand IBO Italy. The specific variant (motor type and diameter) is indicated in the product name.
How can I protect the 6" SPINOX pump from running dry?
The pump can be used with dry-run protection that operates without the need to install additional probes or sensors directly in the well, simplifying installation compared with solutions that require separate sensor wiring.
Where can I buy a 6" SPINOX submersible pump made by Dambat?
Dambat does not sell directly. The 6" SPINOX pump is available from our sales partners, plumbing wholesalers, and authorized online distributors.
What warranty terms apply to the 6" SPINOX pump with an IPRO water-filled motor?
IPRO - 36 months (3 years) manufacturer's warranty. Warranty and post-warranty service provided by Dambat.
