6" SPINOX 60-4 (7.5 kW, 400 V) - multistage stainless steel submersible pump, IPRO oil-filled motor
6" SPINOX with an IPRO oil-filled motor is a multistage submersible pump made entirely
of AISI 304 stainless steel, designed for drawing and pumping clean, technically untreated water
from drilled deep wells with a minimum internal diameter of 160 mm. The pump is
powered by an IPRO IOM oil-filled motor. The series includes a range of models with varying
hydraulic parameters and a wide range of power ratings, allowing you to choose a model to
suit the requirements of a specific high-output installation.
Who it's for
-
Farms and orchards with high water demand – an output of 415 l/min makes it possible to supply extensive irrigation systems for fields, orchards and covered crops from a single source.
-
Managers of multi-family buildings and residential estates – a single deep well can supply water to several buildings or an entire community in locations without access to the municipal water network.
-
Contractors of water supply and fire protection systems – the increased flow rate is suitable for systems requiring large volumes of water, including hydrant systems and fire protection tanks.
-
Industrial plants and companies carrying out dewatering work – drawing process water and dewatering excavations and areas with high groundwater levels.
Applications
- Drawing and pumping raw water from larger-diameter drilled deep wells before treatment.
- Water supply for multi-family buildings, residential estates and farms with high demand.
- Supplying extensive irrigation and sprinkler systems, and lowering groundwater levels.
- Water supply and fire protection systems requiring increased flow rates.
Depending on the performance of the selected model, 6" SPINOX pumps with an IPRO oil-filled motor are suitable both for supplying a single, larger facility and for installations serving several buildings or larger-scale irrigation systems. The 6" SPINOX 60-4 submersible pump (7.5 kW, 400 V) with an IPRO oil-filled motor is selected individually to suit the parameters of the specific well - its depth, diameter, and required output.
The 6" SPINOX pump is not a water treatment device and does not certify
that the water is suitable for human consumption – if the water is to be used for drinking,
cooking, or other household purposes, an appropriate water treatment system must be provided and
water quality must be monitored at the point of use.
Features, description, and technical data
The 6" SPINOX with an IPRO oil-filled motor is a multistage deep-well pump in which all
key structural components – the suction and discharge ports, housing, shaft, impeller, and
diffuser – are made of AISI 304 stainless steel. This construction provides increased
wear resistance and a long service life when operating in contact with raw water, which may
contain fine mineral contaminants. The mechanical seal uses a ceramic / SiC / NBR configuration. The pump is factory-fitted with a check valve
to prevent water from flowing back into the discharge pipe after the pump stops.
Powered by an IPRO IOM oil-filled motor, cooled and lubricated by oil in a sealed motor chamber. The power cable length is selected to suit the specific device
variant and well depth. The pump operates continuously, in a vertical
or horizontal position, at a maximum pumped liquid temperature of 35°C and with insulation class F.
- Device type: multistage deep-well pump
- IPRO motor: IPRO (IOM oil-filled motor)
- Model: 6" SPINOX 60-4
- Motor power: 7.5 kW
- Power supply: 400 V
- Motor construction: oil-filled
- Set diameter: 131 mm (with 4" motor) / 145 mm (with 6" motor)
- Minimum well diameter: 160 mm
- Materials: suction/discharge port, housing, shaft, impeller, diffuser – AISI 304 stainless steel; mechanical seal – ceramic / SiC / NBR
- Motor speed: 2850 rpm
- Max. pumped liquid temperature: 35°C
- Protection rating: IP68
- Operating mode: continuous
- Operating position: vertical / horizontal
- Built-in check valve: yes
Technical specifications may vary by production batch. Before installation, we recommend checking the device's nameplate.
IPRO – 36 months (3 years) manufacturer's warranty. Dambat provides warranty and post-warranty service.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certifications.
Frequently asked questions (FAQ) – 6" SPINOX submersible pump with an IPRO oil-filled motor
What is the 6" SPINOX submersible pump with an IPRO oil-filled motor used for?
The 6" SPINOX with an IPRO oil-filled motor is a multistage submersible pump designed to
extract and pump raw / untreated water from large-diameter drilled deep wells before treatment - including
to supply multi-family buildings,
farms, and water supply and fire protection systems.
How do I choose the right 6" SPINOX model for my well?
The model selection depends on the well's depth and diameter and the required system output -
the series includes several hydraulic subcategories with different maximum outputs and power ratings.
What motors are available for the 6" SPINOX submersible pump?
The 6" SPINOX hydraulics can be paired with a 4" or 6" diameter motor, depending on the
model: an IPRO WMC water-filled motor, an IPRO IOM oil-filled motor, or an oil-filled
motor from the Italian brand IBO Italy. The specific variant (motor type and diameter) is indicated
in the product name.
How can I protect the 6" SPINOX pump from running dry?
The pump can be used with dry-run protection that works without
installing additional probes or sensors directly in the well, simplifying
installation compared with solutions that require separate sensor wiring.
Where can I buy the 6" SPINOX submersible pump manufactured by Dambat?
Dambat does not sell directly. The 6" SPINOX pump is available from our
sales partners, plumbing wholesalers, and authorized online distributors.
What are the warranty terms for the 6" SPINOX pump with an IPRO oil-filled motor?
IPRO – 36 months (3 years) manufacturer's warranty. Dambat provides warranty and post-warranty service.
