6" SPINOX 60-3 (5.5 kW, 400 V) - multistage stainless steel deep-well pump, IPRO oil-filled motor
The 6" SPINOX with an IPRO oil-filled motor is a multistage deep-well pump made entirely of AISI 304 stainless steel, designed for drawing and pumping technically clean raw water from deep boreholes with a minimum internal diameter of 160 mm. The pump is powered by an IPRO IOM oil-filled motor. The range includes a number of models with different hydraulic parameters and a wide range of power ratings, making it possible to select a model to suit the needs of a specific high-capacity installation.
Who it's for
-
Farms and orchards with high water demand - a capacity of 415 l/min makes it possible to supply extensive irrigation systems for fields, orchards, and covered crops from a single source.
-
Managers of multi-family buildings and housing estates - a single deep-well water source can supply several buildings or an entire community with domestic water in locations without access to the municipal network.
-
Water supply and fire protection system contractors - the increased flow rate is suitable for systems requiring large volumes of water, including hydrant systems and fire water tanks.
-
Industrial plants and companies carrying out dewatering work - drawing technical water for industrial processes and dewatering excavations and areas with high groundwater levels.
Applications
- Drawing and pumping raw water from larger-diameter deep boreholes before treatment.
- Supplying water to multi-family buildings, housing estates, and farms with high demand.
- Supplying extensive irrigation and sprinkler systems, and lowering groundwater levels.
- Water supply and fire protection systems requiring increased flow rates.
WDepending on the performance of the selected model, 6" SPINOX pumps with IPRO oil-filled motors are suitable for supplying a single larger facility as well as installations serving several buildings or large-scale irrigation systems. The 6" SPINOX 60-3 deep-well pump (5.5 kW, 400 V) with an IPRO oil-filled motor is selected individually to match the parameters of the specific well - its depth, diameter, and required capacity.
The 6" SPINOX pump is not a water treatment device and does not certify that the water
is fit for human consumption. If the water is to be used for drinking,
cooking or other household purposes, an appropriate water treatment system and
water quality monitoring at the point of use must be provided.
Features, description and technical data
The 6" SPINOX with an IPRO oil-filled motor is a multistage submersible pump whose key
structural components – the suction and discharge connections, housing, shaft, impeller, and
diffuser – are all made of AISI 304 stainless steel. This design provides increased
wear resistance and a long service life when operating in contact with raw water, which may
contain fine mineral impurities. The mechanical seal uses a ceramic / SiC / NBR arrangement.
The pump is factory-fitted with a check valve to prevent water from flowing back in the discharge
pipeline after the pump stops.
The pump is driven by an IPRO IOM oil-filled motor, cooled and lubricated by oil contained
in a sealed motor chamber. The power cable length is selected to suit the specific
device variant and well depth. The pump operates in continuous mode, in a vertical
or horizontal position, at a maximum pumped liquid temperature of 35°C and with insulation class F.
- Device type: multistage submersible pump
- IPRO motor: IPRO (IOM oil-filled motor)
- Model: 6" SPINOX 60-3
- Motor power: 5.5 kW
- Power supply: 400 V
- Motor design: oil-filled
- Set diameter: 131 mm (with 4" motor) / 145 mm (with 6" motor)
- Minimum well diameter: 160 mm
- Materials: suction/discharge connection, housing, shaft, impeller, diffuser – AISI 304 stainless steel; mechanical seal – ceramic / SiC / NBR
- Motor speed: 2850 rpm
- Max. pumped liquid temperature: 35°C
- Protection rating: IP68
- Operating mode: continuous
- Operating position: vertical / horizontal
- Built-in check valve: yes
Technical data may vary by production batch - we recommend checking the device nameplate before installation.
IPRO - 36 months (3 years) manufacturer’s warranty. Dambat provides warranty and post-warranty service.
Dambat - a trusted manufacturer of pumps and hydrotechnical equipment with quality certifications.
Frequently asked questions (FAQ) - 6" SPINOX submersible pump with an IPRO oil-filled motor
What is the 6" SPINOX submersible pump with an IPRO oil-filled motor used for?
The 6" SPINOX with an IPRO oil-filled motor is a multistage submersible pump designed to
draw and pump raw / untreated water from large-diameter deep boreholes, before treatment - including for
supplying multi-family buildings, farms, and water supply and fire protection systems.
How do I choose the right 6" SPINOX model for my well?
The model choice depends on the well's depth and diameter and the required system flow rate -
the series includes several hydraulic subcategories with different maximum flow rates and power ratings.
What motors are available for the 6" SPINOX submersible pump?
The 6" SPINOX hydraulics can be paired with a 4" or 6" diameter motor, depending on the
model: an IPRO WMC water-filled motor, an IPRO IOM oil-filled motor, or an oil-filled
motor from the Italian brand IBO Italy. The specific variant (motor type and diameter) is indicated
in the product name.
How can I protect the 6" SPINOX pump from running dry?
The pump can be used with dry-run protection that works without
installing additional probes or sensors directly in the well, simplifying
installation compared to solutions that require separate sensor wiring.
Where can I buy the 6" SPINOX submersible pump manufactured by Dambat?
Dambat does not sell directly. The 6" SPINOX pump is available from our
sales partners, plumbing wholesalers and authorized online distributors.
What warranty terms apply to the 6" SPINOX pump with an IPRO oil-filled motor?
IPRO - 36 months (3 years) manufacturer’s warranty. Dambat provides warranty and post-warranty service.
