6" SPINOX 60-17 (30 kW, 400 V) - multistage stainless steel submersible pump, IPRO water-filled motor
6" SPINOX with an IPRO water-filled motor is a multistage submersible pump made entirely of AISI 304 stainless steel, designed to draw and pump technically clean raw water from drilled deep wells with a minimum internal diameter of 160 mm. The pump is driven by an IPRO WMC water-filled motor. The series includes a range of models with different hydraulic parameters and a wide power range, allowing you to choose a model to meet the needs of a specific high-capacity installation.
Who it's for
-
Farms and orchards with high water demand – a capacity of 415 l/min allows extensive irrigation systems for fields, orchards and greenhouse crops to be supplied from a single source.
-
Managers of multi-family buildings and housing estates – a single deep well can supply several buildings or an entire community with domestic water in locations without access to the municipal water network.
-
Water supply and fire protection system contractors – the increased flow rate is suitable for systems requiring large volumes of water, including hydrant systems and fire water tanks.
-
Industrial plants and companies carrying out dewatering work – drawing technical water for processes and draining excavations and areas with high groundwater levels.
Applications
- Intake and pumping of raw water from larger-diameter drilled deep wells before treatment.
- Water supply for multi-family buildings, housing estates and farms with high demand.
- Supplying extensive irrigation and sprinkler systems, and lowering groundwater levels.
- Water supply and fire protection systems requiring increased flow rates.
Depending on the capacity of the selected model, 6" SPINOX pumps with an IPRO water-filled motor are suitable both for supplying a single larger facility and for installations serving several buildings or large-scale irrigation systems. The 6" SPINOX 60-17 submersible pump (30 kW, 400 V) with an IPRO water-filled motor is individually selected to match the parameters of a specific well—its depth, diameter and required capacity.
The 6" SPINOX pump is not a water treatment device and does not certify that the water
is fit for human consumption – if the water is to be used for drinking,
cooking or other domestic purposes, an appropriate water treatment system and
water quality monitoring at the point of use must be provided.
Features, description and technical data
The 6" SPINOX with an IPRO water-filled motor is a multistage submersible pump whose
key structural components – suction and discharge connections, housing, shaft, impeller and
diffuser – are all made of AISI 304 stainless steel. This design provides increased
wear resistance and a long service life when operating in contact with raw water, which may
contain fine mineral contaminants. The mechanical seal uses a ceramic / SiC / NBR
configuration. The pump is factory-equipped with a check valve
to prevent water from flowing back through the discharge pipe after the pump stops.
The pump is driven by an IPRO WMC water-filled motor. The power cable length is selected
for the specific device variant and well depth. The pump operates in continuous mode,
in a vertical or horizontal position, at a maximum pumped liquid temperature of 35°C
and insulation class F.
- Device type: multistage submersible pump
- Motor brand: IPRO (WMC water-filled motor)
- Model: 6" SPINOX 60-17
- Motor power: 30 kW
- Power supply: 400 V
- Motor design: water-filled
- Unit diameter: 131 mm (with 4" motor) / 145 mm (with 6" motor)
- Minimum well diameter: 160 mm
- Materials: suction/discharge connections, housing, shaft, impeller, diffuser – AISI 304 stainless steel; mechanical seal – ceramic / SiC / NBR
- Motor speed: 2850 rpm
- Max. pumped liquid temperature: 35°C
- Protection rating: IP68
- Operating mode: continuous
- Operating position: vertical / horizontal
- Built-in check valve: yes
Technical specifications may vary by production batch. Before installation, we recommend checking the device’s rating plate.
IPRO – 36 months (3 years) manufacturer’s warranty. Warranty and post-warranty service provided by Dambat.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certifications.
Frequently asked questions (FAQ) – 6" SPINOX submersible pump with an IPRO water-filled motor
What is the 6" SPINOX submersible pump with an IPRO water-filled motor used for?
The 6" SPINOX with an IPRO water-filled motor is a multistage submersible pump designed to draw and pump raw / untreated water from larger-diameter deep drilled wells before treatment, including for supplying multi-family buildings, farms, and water supply and fire protection systems.
How do I choose the right 6" SPINOX model for my well?
The right model depends on the well’s depth and diameter and the required system capacity. The series includes several hydraulic subcategories with different maximum capacities and power ratings.
What motors are available for the 6" SPINOX submersible pump?
The 6" SPINOX hydraulics can be combined with a 4" or 6" motor, depending on the model: an IPRO WMC water-filled motor, an IPRO IOM oil-filled motor, or an oil-filled motor from the Italian brand IBO Italy. The product name specifies the particular variant (motor type and diameter).
How can I protect the 6" SPINOX pump from running dry?
The pump can be used with dry-run protection that works without installing additional probes or sensors directly in the well, simplifying installation compared with solutions that require separate sensor wiring.
Where can I buy the 6" SPINOX submersible pump manufactured by Dambat?
Dambat does not sell directly. The 6" SPINOX pump is available from our business partners, plumbing wholesalers, and authorized online distributors.
What warranty terms apply to the 6" SPINOX pump with an IPRO water-filled motor?
IPRO – 36 months (3 years) manufacturer’s warranty. Warranty and post-warranty service provided by Dambat.
