6" SPINOX 60-12 (22 kW, 400 V) - multistage stainless steel submersible pump, IPRO water-filled motor
6" SPINOX with an IPRO water-filled motor is a multistage submersible pump made entirely of AISI 304 stainless steel, designed for drawing and pumping clean raw water from drilled deep wells with a minimum internal diameter of 160 mm. The pump is driven by an IPRO WMC water-filled motor. The series includes a range of models with different hydraulic parameters and a broad power range, allowing you to choose a model to suit the needs of a specific high-capacity system.
Who it's for
-
Farms and orchards with high water demand - a capacity of 415 l/min can supply extensive irrigation systems for fields, orchards and greenhouse crops from a single water source.
-
Managers of multifamily buildings and housing estates - a single deep well can supply water to several buildings or an entire housing association in locations without access to the municipal water network.
-
Water supply and fire protection system contractors - the increased flow rate is suitable for systems requiring large volumes of water, including hydrant systems and fire water tanks.
-
Industrial plants and companies carrying out dewatering work - drawing technical water for processes and dewatering excavations and sites with high groundwater levels.
Applications
- Drawing and pumping raw water from larger-diameter drilled deep wells before treatment.
- Water supply for multifamily buildings, housing estates and farms with high water demand.
- Supplying extensive irrigation and sprinkler systems, as well as lowering groundwater levels.
- Water supply and fire protection systems requiring higher flow rates.
Depending on the capacity of the selected model, 6" SPINOX pumps with an IPRO water-cooled motor are suitable for supplying a single, larger facility as well as for installations serving several buildings or larger-scale irrigation systems. The 6" SPINOX 60-12 submersible pump (22 kW, 400 V) with an IPRO water-cooled motor is selected individually to match the specifications of a particular well—its depth, diameter, and required capacity.
The 6" SPINOX pump is not a water treatment device and does not certify that the water
is safe for human consumption. If the water is to be used for drinking,
cooking, or other domestic purposes, an appropriate water treatment system and
water quality monitoring at the point of use must be provided.
Features, description and technical data
The 6" SPINOX with an IPRO water-filled motor is a multistage submersible pump whose
key structural components – the suction and discharge ports, housing, shaft, impeller, and
diffuser – are all made of AISI 304 stainless steel. This design provides increased
resistance to wear and a long service life when operating in contact with raw water, which may
contain fine mineral contaminants. The mechanical seal uses a ceramic / SiC / NBR
configuration. The pump comes factory-equipped with a check valve
to prevent water from flowing back through the discharge pipe after the pump stops.
The pump is driven by an IPRO WMC water-filled motor. The power cable length is selected
for the specific device configuration and well depth. The pump operates continuously,
in a vertical or horizontal position, at a maximum pumped liquid temperature of 35°C
and with insulation class F.
- Device type: multistage submersible pump
- Motor brand: IPRO (WMC water-filled motor)
- Model: 6" SPINOX 60-12
- Motor power: 22 kW
- Power supply: 400 V
- Motor design: water-filled
- Unit diameter: 131 mm (with 4" motor) / 145 mm (with 6" motor)
- Minimum well diameter: 160 mm
- Materials: suction/discharge ports, housing, shaft, impeller, diffuser – AISI 304 stainless steel; mechanical seal – ceramic / SiC / NBR
- Motor speed: 2850 rpm
- Max. pumped liquid temperature: 35°C
- Protection rating: IP68
- Operating mode: continuous
- Operating position: vertical / horizontal
- Built-in check valve: yes
Technical data may vary depending on the production batch – before installation, we recommend checking the device’s rating plate.
IPRO – 36 months (3 years) manufacturer’s warranty. Warranty and post-warranty service provided by Dambat.
Dambat – a trusted manufacturer of pumps and water engineering equipment with quality certifications.
Frequently asked questions (FAQ) – 6" SPINOX submersible pump with an IPRO water-filled motor
What is the 6" SPINOX submersible pump with an IPRO water-filled motor used for?
The 6" SPINOX with an IPRO water-filled motor is a multistage submersible pump designed to draw
and pump raw / untreated water from larger-diameter drilled deep wells before treatment – including for supplying multifamily buildings,
farms, and water supply and fire protection systems.
How do I choose the right 6" SPINOX model for my well?
Choosing a model depends on the depth and diameter of the well and the required system capacity –
the range includes several hydraulic subcategories with different maximum capacities and power ratings.
Which motors are available for the 6" SPINOX submersible pump?
The 6" SPINOX hydraulic section can be paired, depending on the
model, with a 4" or 6" motor: an IPRO WMC water-filled motor, an IPRO IOM oil-filled motor, or an oil-filled motor from the Italian brand IBO Italy. The specific variant (motor type and diameter) is indicated
in the product name.
How can I protect the 6" SPINOX pump against dry running?
The pump can be used with dry-run protection that operates without
installing additional probes or sensors directly in the well, simplifying
installation compared with solutions that require separate sensor wiring.
Where can I buy the 6" SPINOX submersible pump manufactured by Dambat?
Dambat does not sell directly. The 6" SPINOX pump is available from our
trade partners, plumbing wholesalers, and authorized online distributors.
What warranty terms apply to the 6" SPINOX pump with an IPRO water-filled motor?
IPRO – 36 months (3 years) manufacturer’s warranty. Warranty and post-warranty service provided by Dambat.
