6" SPINOX 46-6 (9.2 kW, 400 V) - multistage stainless steel submersible pump, IPRO oil-filled motor
6" SPINOX with an IPRO oil-filled motor is a multistage submersible pump made entirely of AISI 304 stainless steel, designed for drawing and pumping clean, untreated water from drilled deep wells with a minimum internal diameter of 160 mm. The pump is driven by an IPRO IOM oil-filled motor. The series includes a range of models with different hydraulic parameters and a wide power range, allowing you to select a model to meet the needs of a specific high-capacity installation.
Who it's for
-
Farms and orchards with high water demand – the 415 l/min output allows extensive irrigation systems for fields, orchards and greenhouse crops to be supplied from a single source.
-
Managers of multi-family buildings and housing estates – a single deep well can supply domestic water to several buildings or an entire community in locations without access to the municipal water network.
-
Water supply and fire protection system contractors – the increased flow rate is suitable for systems requiring large volumes of water, including hydrant systems and fire water tanks.
-
Industrial plants and companies carrying out dewatering work – drawing process water and dewatering excavations and areas with high groundwater levels.
Applications
- Drawing and pumping untreated water from larger-diameter drilled deep wells before treatment.
- Supplying water to multi-family buildings, housing estates and farms with high water demand.
- Supplying extensive irrigation and sprinkler systems and lowering groundwater levels.
- Water supply and fire protection systems requiring increased flow rates.
Depending on the performance of the selected model, 6" SPINOX pumps with IPRO oil-filled motors are suitable both for supplying a single larger facility and for installations serving several buildings or larger-scale irrigation systems. The 6" SPINOX 46-6 submersible pump (9.2 kW, 400 V) with an IPRO oil-filled motor is individually selected to match the parameters of the specific well - its depth, diameter, and required capacity.
The 6" SPINOX pump is not a water treatment device and does not certify
that the water is suitable for human consumption – if the water is to be used for drinking,
cooking or other domestic purposes, an appropriate water treatment system and
water quality monitoring at the point of use must be provided.
Features, description and technical data
The 6" SPINOX with IPRO oil-filled motor is a multistage submersible pump in which all
key structural components – the suction and discharge ports, housing, shaft, impeller, and
diffuser – are made of AISI 304 stainless steel. This design provides increased
wear resistance and a long service life when operating in contact with raw water, which may
contain fine mineral contaminants. The mechanical seal uses a ceramic / SiC / NBR configuration. The pump is factory-equipped with a check valve,
which prevents water from flowing back through the discharge pipe after the pump stops.
The pump is driven by an IPRO IOM oil-filled motor, cooled and lubricated by oil in a sealed motor chamber. The power cable length is selected for the specific device variant and well depth. The pump operates in continuous mode, vertically
or horizontally, at a maximum pumped liquid temperature of 35°C and insulation class F.
- Device type: multistage submersible pump
- IPRO motor: IPRO (IOM oil-filled motor)
- Model: 6" SPINOX 46-6
- Motor power: 9.2 kW
- Power supply: 400 V
- Motor design: oil-filled
- Set diameter: 131 mm (with 4" motor) / 145 mm (with 6" motor)
- Minimum well diameter: 160 mm
- Materials: suction/discharge port, housing, shaft, impeller, diffuser – AISI 304 stainless steel; mechanical seal – ceramic / SiC / NBR
- Motor speed: 2850 rpm
- Max. pumped liquid temperature: 35°C
- Protection rating: IP68
- Operating mode: continuous
- Operating position: vertical / horizontal
- Built-in check valve: yes
Technical data may vary depending on the production batch. We recommend checking the device nameplate before installation.
IPRO – 36 months (3 years) manufacturer's warranty. Warranty and post-warranty service provided by Dambat.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certifications.
Frequently asked questions (FAQ) – 6" SPINOX submersible pump with an IPRO oil-filled motor
What is the 6" SPINOX submersible pump with an IPRO oil-filled motor used for?
The 6" SPINOX with an IPRO oil-filled motor is a multistage submersible pump designed to draw and pump raw / untreated water from large-diameter deep boreholes before treatment. It is suitable for supplying multifamily buildings, farms, and water supply and fire protection systems, among other uses.
How do I choose the right 6" SPINOX model for my well?
The choice of model depends on the well's depth and diameter, as well as the required system capacity. The series includes several hydraulic subcategories with different maximum capacities and power ratings.
What motors are available for the 6" SPINOX submersible pump?
The 6" SPINOX hydraulics can be paired, depending on the model, with a 4" or 6" motor: the IPRO WMC water-filled motor, the IPRO IOM oil-filled motor, or an oil-filled motor by the Italian brand IBO Italy. The specific variant (motor type and diameter) is indicated in the product name.
How can I protect the 6" SPINOX pump against dry running?
The pump can be used with dry-run protection that operates without requiring additional probes or sensors to be installed directly in the well, simplifying installation compared with solutions that require separate sensor wiring.
Where can I buy the 6" SPINOX submersible pump manufactured by Dambat?
Dambat does not sell directly. The 6" SPINOX pump is available from our trade partners, plumbing wholesalers, and authorized online distributors.
What warranty terms apply to the 6" SPINOX pump with an IPRO oil-filled motor?
IPRO – 36 months (3 years) manufacturer's warranty. Warranty and post-warranty service provided by Dambat.
