6" SPINOX 46-5 (7.5 kW, 400 V) - multistage stainless steel deep-well pump, IPRO oil-filled motor
The 6" SPINOX with IPRO oil-filled motor is a multistage deep-well pump made entirely of AISI 304 stainless steel, designed to draw and pump clean, technically untreated raw water from drilled deep-well sources with a minimum internal diameter of 160 mm. The pump is driven by an IPRO IOM oil-filled motor. The series includes a range of models with different hydraulic parameters and a broad power range, allowing you to choose a model to suit the needs of a specific high-output system.
Who it's for
-
Farms and orchards with high water demand - an output of 415 l/min allows extensive irrigation systems for fields, orchards, and covered crops to be supplied from a single source.
-
Managers of multi-family buildings and residential communities - a single deep-well water source can supply utility water to several buildings or an entire community in locations without access to the municipal water network.
-
Water supply and fire protection system contractors - the increased flow rate is suitable for systems requiring large volumes of water, including hydrant systems and fire water tanks.
-
Industrial plants and companies carrying out dewatering work - drawing process water and dewatering excavations and areas with high groundwater levels.
Applications
- Drawing and pumping raw water from larger-diameter drilled deep wells before treatment.
- Water supply for multi-family buildings, residential communities, and farms with high water demand.
- Supplying extensive irrigation and sprinkler systems, and lowering groundwater levels.
- Water supply and fire protection systems requiring increased flow rates.
With output depending on the selected model, 6" SPINOX pumps with IPRO oil-filled motors are suitable for supplying water to a single larger facility as well as installations serving several buildings or large-scale irrigation systems. The 6" SPINOX 46-5 deep-well pump (7.5 kW, 400 V) with an IPRO oil-filled motor is selected individually to match the parameters of the specific well - its depth, diameter, and required output.
The 6" SPINOX pump is not a water treatment device and does not certify
that the water is suitable for human consumption. If the water is to be used for drinking,
cooking or other household purposes, an appropriate water treatment system must be provided, along with
water quality monitoring at the point of use.
Features, description and technical data
The 6" SPINOX with an IPRO oil-filled motor is a multistage deep-well pump in which all
key structural components – the suction and discharge ports, housing, shaft, impeller, and
diffuser – are made of AISI 304 stainless steel. This design provides increased
wear resistance and a long service life when operating in contact with raw water, which may
contain fine mineral contaminants. The mechanical seal is made of ceramic / SiC / NBR.
The pump is factory-equipped with a check valve that prevents water from flowing back in the discharge
pipe after the pump stops.
Powered by an IPRO IOM oil-filled motor, cooled and lubricated by oil contained
in a sealed motor chamber. The power cable length is selected for the specific
device variant and well depth. The pump operates in continuous mode, in a vertical
or horizontal position, at a maximum pumped liquid temperature of 35°C and insulation class F.
- Device type: multistage deep-well pump
- IPRO motor: IPRO (IOM oil-filled motor)
- Model: 6" SPINOX 46-5
- Motor power: 7.5 kW
- Power supply: 400 V
- Motor construction: oil-filled
- Unit diameter: 131 mm (with 4" motor) / 145 mm (with 6" motor)
- Minimum well diameter: 160 mm
- Materials: suction/discharge port, housing, shaft, impeller, diffuser – AISI 304 stainless steel; mechanical seal – ceramic / SiC / NBR
- Motor speed: 2850 rpm
- Max. pumped liquid temperature: 35°C
- Protection rating: IP68
- Operating mode: continuous
- Operating position: vertical / horizontal
- Built-in check valve: yes
Technical data may vary by production batch. We recommend checking the device nameplate before installation.
IPRO - 36 months (3 years) manufacturer's warranty. Dambat provides warranty and post-warranty service.
Dambat - a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) - 6" SPINOX submersible pump with an IPRO oil-filled motor
What is the 6" SPINOX submersible pump with an IPRO oil-filled motor used for?
The 6" SPINOX with an IPRO oil-filled motor is a multistage submersible pump designed to
draw and pump raw / untreated water from larger-diameter deep drilled wells before treatment - including for supplying multifamily buildings,
farms, and water supply and fire protection systems.
How do I choose the right 6" SPINOX model for my well?
The right model depends on the well's depth and diameter, as well as the required system capacity -
the series includes several hydraulic subcategories with different maximum capacities and power ratings.
What motors are available for the 6" SPINOX submersible pump?
The 6" SPINOX hydraulics can be paired with a 4" or 6" diameter motor, depending on the
model: an IPRO WMC water-filled motor, an IPRO IOM oil-filled motor, or an oil-filled
motor from the Italian brand IBO Italy. The specific variant (motor type and diameter) is indicated
in the product name.
How can I protect the 6" SPINOX pump from dry running?
The pump can be used with dry-run protection that works without installing additional
probes or sensors directly in the well, simplifying installation compared with solutions that require separate sensor wiring.
Where can I buy the 6" SPINOX submersible pump manufactured by Dambat?
Dambat does not sell directly to customers. The 6" SPINOX pump is available from our
sales partners, plumbing wholesalers, and authorized online distributors.
What are the warranty terms for the 6" SPINOX pump with an IPRO oil-filled motor?
IPRO - 36 months (3 years) manufacturer's warranty. Dambat provides warranty and post-warranty service.