6" SPINOX 46-4 (7.5 kW, 400 V) - multistage stainless steel submersible pump with IPRO oil-filled motor
6" SPINOX with an IPRO oil-filled motor is a multistage submersible pump made entirely of AISI 304 stainless steel, designed for drawing and pumping clean raw water from drilled deep wells with a minimum internal diameter of 160 mm. The pump is driven by an IPRO IOM oil-filled motor. The series includes a range of models with varying hydraulic parameters and a wide range of power ratings, making it possible to select a model to meet the needs of a specific high-output system.
Who it's for
-
Farms and orchards with high water demand - an output of 415 l/min allows extensive irrigation systems for fields, orchards, and covered crops to be supplied from a single water source.
-
Managers of multi-family buildings and housing estates - a single deep well can supply utility water to several buildings or an entire community in locations without access to the municipal water network.
-
Water supply and fire protection system contractors - the increased flow rate is suitable for systems requiring large volumes of water, including hydrant systems and fire protection tanks.
-
Industrial plants and companies carrying out dewatering work - drawing technical water for processes and dewatering excavations and areas with high groundwater levels.
Applications
- Drawing and pumping raw water from larger-diameter drilled deep wells before treatment.
- Water supply for multi-family buildings, housing estates, and farms with high water demand.
- Supplying extensive irrigation and sprinkler systems, and lowering groundwater levels.
- Water supply and fire protection systems requiring increased flow rates.
Depending on the performance of the selected model, 6" SPINOX pumps with IPRO oil-filled motors are suitable for supplying a single larger facility, as well as for installations serving several buildings or larger-scale irrigation systems. The 6" SPINOX 46-4 submersible pump (7.5 kW, 400 V) with an IPRO oil-filled motor is selected individually to match the parameters of the specific well - its depth, diameter, and required output.
The 6" SPINOX pump is not a water-treatment device and does not certify that the water is fit for human consumption. If the water is to be used for drinking, cooking, or other household purposes, an appropriate water-treatment system must be provided, along with water quality monitoring at the point of use.
Features, description and technical data
The 6" SPINOX with an IPRO oil-filled motor is a multistage deep-well pump in which all key structural components – the suction and discharge connections, housing, shaft, impeller, and diffuser – are made of AISI 304 stainless steel. This design provides increased wear resistance and a long service life when operating in contact with raw water, which may contain fine mineral impurities. The mechanical seal consists of ceramic / SiC / NBR. The pump is factory-equipped with a check valve to prevent water from flowing back in the discharge pipe after the pump stops.
The pump is powered by an IPRO IOM oil-filled motor, cooled and lubricated by oil in a sealed motor chamber. The power cable length is selected for the specific device variant and well depth. The pump operates in continuous mode, in a vertical or horizontal position, at a maximum pumped-liquid temperature of 35°C and insulation class F.
- Device type: multistage deep-well pump
- Motor IPRO: IPRO (IOM oil-filled motor)
- Model: 6" SPINOX 46-4
- Motor power: 7.5 kW
- Power supply: 400 V
- Motor design: oil-filled
- Set diameter: 131 mm (with 4" motor) / 145 mm (with 6" motor)
- Minimum well diameter: 160 mm
- Materials: suction/discharge connection, housing, shaft, impeller, diffuser – AISI 304 stainless steel; mechanical seal – ceramic / SiC / NBR
- Motor speed: 2850 rpm
- Max. temperature of pumped liquid: 35°C
- Protection rating: IP68
- Operating mode: continuous
- Operating position: vertical / horizontal
- Built-in check valve: yes
Technical data may vary depending on the production batch - before installation, we recommend checking the device’s nameplate.
IPRO - 36 months (3 years) manufacturer’s warranty. Warranty and post-warranty service provided by Dambat.
Dambat - a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) - 6" SPINOX submersible pump with an IPRO oil-filled motor
What is the 6" SPINOX submersible pump with an IPRO oil-filled motor used for?
The 6" SPINOX with an IPRO oil-filled motor is a multistage submersible pump designed to
draw and pump raw / untreated water from larger-diameter drilled deep wells before treatment - including for supplying multi-family buildings,
farms, and water supply and fire protection systems.
How do I choose the right 6" SPINOX model for my well?
The model selection depends on the well depth and diameter, as well as the required system flow rate -
the series includes several hydraulic subcategories with different maximum flow rates and power ratings.
What motors are available for the 6" SPINOX submersible pump?
The 6" SPINOX hydraulics can be paired with a 4" or 6" motor, depending on the
model: an IPRO WMC water-filled motor, an IPRO IOM oil-filled motor, or an oil-filled motor
from the Italian brand IBO Italy. The specific variant (motor type and diameter) is indicated
in the product name.
How can I protect the 6" SPINOX pump from running dry?
The pump can be used with dry-run protection that operates without
requiring additional probes or sensors to be installed directly in the well, simplifying
installation compared with solutions that require separate sensor wiring.
Where can I buy the 6" SPINOX submersible pump manufactured by Dambat?
Dambat does not sell directly. The 6" SPINOX pump is available from our
sales partners, plumbing wholesalers, and authorized online distributors.
What warranty terms apply to the 6" SPINOX pump with an IPRO oil-filled motor?
IPRO - 36 months (3 years) manufacturer’s warranty. Warranty and post-warranty service provided by Dambat.
