6" SPINOX 46-2 (3 kW, 400 V) - multistage stainless steel submersible pump, IPRO water-filled motor
The 6" SPINOX with an IPRO water-filled motor is a multistage submersible pump made entirely of AISI 304 stainless steel, designed for drawing and pumping clean raw water from drilled deep wells with a minimum internal diameter of 160 mm. The pump is driven by an IPRO WMC water-filled motor. The series includes a range of models with differing hydraulic parameters and a wide range of power ratings, allowing you to select a model to meet the needs of a specific high-output installation.
Who it's for
-
Farms and orchards with high water demand – an output of 415 l/min allows extensive irrigation systems for fields, orchards, and greenhouse crops to be supplied from a single water source.
-
Managers of multi-family buildings and housing estates – a single deep well can supply utility water to several buildings or an entire housing association in locations without access to the municipal water network.
-
Water supply and fire protection system contractors – the increased flow rate is suitable for systems requiring large volumes of water, including hydrant systems and fire water tanks.
-
Industrial plants and companies carrying out dewatering work – drawing process water and dewatering excavations and areas with high groundwater levels.
Applications
- Drawing and pumping raw water from larger-diameter drilled deep wells before treatment.
- Supplying water to multi-family buildings, housing estates, and farms with high demand.
- Supplying extensive irrigation and sprinkler systems, and lowering groundwater levels.
- Water supply and fire protection systems requiring increased flow rates.
Depending on the output of the selected model, 6" SPINOX pumps with an IPRO water-cooled motor are suitable for supplying a single larger facility, as well as installations serving several buildings or large-scale irrigation systems. The 6" SPINOX 46-2 submersible pump (3 kW, 400 V) with an IPRO water-cooled motor is selected individually to match the specifications of the specific well - its depth, diameter and required output.
The 6" SPINOX pump is not a water treatment device and does not certify
that the water is safe for human consumption. If the water is to be used for drinking,
cooking, or other household purposes, an appropriate water treatment system and
water quality monitoring at the point of use must be provided.
Features, description, and technical data
The 6" SPINOX with an IPRO water-filled motor is a multistage submersible pump in which all
key structural components – the suction and discharge ports, housing, shaft, impeller, and
diffuser – are made of AISI 304 stainless steel. This design provides increased
wear resistance and a long service life when operating in contact with raw water, which may
contain fine mineral contaminants. The mechanical seal uses a ceramic / SiC / NBR
configuration. The pump is factory-equipped with a check valve,
preventing water from flowing back through the discharge pipe after the pump stops.
The pump is powered by an IPRO WMC water-filled motor. The power cable length is selected
for the specific device variant and well depth. The pump operates continuously,
in a vertical or horizontal position, at a maximum pumped liquid temperature of 35°C
and with insulation class F.
- Device type: multistage submersible pump
- Motor brand: IPRO (WMC water-filled motor)
- Model: 6" SPINOX 46-2
- Motor power: 3 kW
- Power supply: 400 V
- Motor design: water-filled
- Set diameter: 131 mm (with 4" motor) / 145 mm (with 6" motor)
- Minimum well diameter: 160 mm
- Materials: suction/discharge port, housing, shaft, impeller, diffuser – AISI 304 stainless steel; mechanical seal – ceramic / SiC / NBR
- Motor speed: 2850 rpm
- Max. pumped liquid temperature: 35°C
- Protection rating: IP68
- Operating mode: continuous
- Operating position: vertical / horizontal
- Built-in check valve: yes
Technical data may vary by production batch - before installation, we recommend checking the device's nameplate.
IPRO – 36 months (3 years) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
Dambat - a trusted manufacturer of pumps and hydrotechnical equipment with quality certifications.
Frequently asked questions (FAQ) - 6" SPINOX submersible pump with an IPRO water-filled motor
What is the 6" SPINOX submersible pump with an IPRO water-filled motor used for?
The 6" SPINOX with an IPRO water-filled motor is a multistage submersible pump designed to draw
and pump raw / untreated water from large-diameter drilled deep wells before treatment - including for
supplying multi-family buildings, farms, and water supply and fire protection systems.
How do I choose the right 6" SPINOX model for my well?
Choosing a model depends on the well's depth and diameter and the required system output -
the series includes several hydraulic subcategories with different maximum outputs and power ratings.
What motors are available for the 6" SPINOX submersible pump?
The 6" SPINOX hydraulics can be paired with a 4" or 6" diameter motor, depending on the
model: an IPRO WMC water-filled motor, an IPRO IOM oil-filled motor, or an oil-filled
motor from the Italian brand IBO Italy. The specific variant (motor type and diameter) is indicated
in the product name.
How can I protect the 6" SPINOX pump from running dry?
The pump can be used with dry-run protection that works without
installing additional probes or sensors directly in the well, simplifying
installation compared to solutions that require separate sensor wiring.
Where can I buy the 6" SPINOX submersible pump made by Dambat?
Dambat does not sell directly. The 6" SPINOX pump is available from our
sales partners, plumbing wholesalers, and authorized online distributors.
What warranty terms apply to the 6" SPINOX pump with an IPRO water-filled motor?
IPRO – 36 months (3 years) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
