6" SPINOX 46-17 (26 kW, 400 V) - multistage stainless steel deep well pump, IPRO water-cooled motor
6" SPINOX with an IPRO water-cooled motor is a multistage deep well pump made entirely of AISI 304 stainless steel, designed for drawing and pumping clean raw water from drilled deep wells with a minimum internal diameter of 160 mm. The pump is powered by an IPRO WMC water-cooled motor. The series includes a range of models with different hydraulic parameters and a wide power range, allowing you to select a model to meet the needs of a specific high-capacity installation.
Who it's for
-
Farms and orchards with high water demand – a capacity of 415 l/min makes it possible to supply extensive irrigation systems for fields, orchards, and covered crops from a single source.
-
Managers of multi-family buildings and residential communities – a single deep well can supply utility water to several buildings or an entire community in locations without access to the municipal water network.
-
Water supply and fire protection system contractors – the increased flow rate is suitable for systems requiring large volumes of water, including hydrant systems and fire water tanks.
-
Industrial plants and companies carrying out dewatering work – drawing technical water for processes and dewatering excavations and areas with high groundwater levels.
Applications
- Drawing and pumping raw water from larger-diameter drilled deep wells before treatment.
- Water supply for multi-family buildings, residential communities, and farms with high demand.
- Supplying extensive irrigation and sprinkler systems, and lowering groundwater levels.
- Water supply and fire protection systems requiring increased flow rates.
Depending on the output of the selected model, 6" SPINOX pumps with an IPRO water-cooled motor are suitable for supplying a single larger facility, as well as installations serving several buildings or large-scale irrigation systems. The 6" SPINOX 46-17 submersible pump (26 kW, 400 V) with an IPRO water-cooled motor is selected individually to match the specifications of the particular well - its depth, diameter, and required output.
The 6" SPINOX pump is not a water treatment device and does not certify
that the water is suitable for human consumption. If the water is to be used for drinking,
cooking, or other household purposes, an appropriate water treatment system and
water quality monitoring at the point of use must be provided.
Features, description, and technical data
The 6" SPINOX with an IPRO water-filled motor is a multistage submersible pump whose key
structural components – the suction and discharge ports, housing, shaft, impeller, and
diffuser – are all made of AISI 304 stainless steel. This design provides increased
wear resistance and a long service life when operating in contact with raw water, which may
contain fine mineral contaminants. The mechanical seal features a ceramic / SiC / NBR
configuration. The pump is factory-fitted with a check valve to prevent water from flowing
back through the discharge pipe after the pump stops.
Powered by an IPRO WMC water-filled motor. The power cable length is selected
for the specific device variant and well depth. The pump operates in continuous mode,
in a vertical or horizontal position, at a maximum pumped liquid temperature of 35°C
and insulation class F.
- Device type: multistage submersible pump
- Motor brand: IPRO (WMC water-filled motor)
- Model: 6" SPINOX 46-17
- Motor power: 26 kW
- Power supply: 400 V
- Motor design: water-filled
- Set diameter: 131 mm (with 4" motor) / 145 mm (with 6" motor)
- Minimum well diameter: 160 mm
- Materials: suction/discharge port, housing, shaft, impeller, diffuser – AISI 304 stainless steel; mechanical seal – ceramic / SiC / NBR
- Motor speed: 2850 rpm
- Max. pumped liquid temperature: 35°C
- Protection rating: IP68
- Operating mode: continuous
- Operating position: vertical / horizontal
- Built-in check valve: yes
Technical data may vary depending on the production batch. Before installation, we recommend checking the device's nameplate.
IPRO – 36 months (3 years) of manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certifications.
Frequently asked questions (FAQ) – 6" SPINOX submersible pump with an IPRO water-cooled motor
What is the 6" SPINOX submersible pump with an IPRO water-cooled motor used for?
The 6" SPINOX with an IPRO water-cooled motor is a multistage submersible pump designed to draw and pump raw/untreated water from larger-diameter drilled deep wells before treatment. It is suitable for supplying multifamily buildings, farms, and water supply and fire protection systems.
How do I choose the right 6" SPINOX model for my well?
Model selection depends on the well's depth and diameter and the installation's required flow rate. The series includes several hydraulic subcategories with different maximum flow rates and power ratings.
What motors are available for the 6" SPINOX submersible pump?
The 6" SPINOX hydraulics can be paired with a 4" or 6" motor, depending on the model: an IPRO WMC water-cooled motor, an IPRO IOM oil-filled motor, or an oil-filled motor from the Italian brand IBO Italy. The specific variant (motor type and diameter) is indicated in the product name.
How can I protect the 6" SPINOX pump against dry running?
The pump can be used with dry-run protection that works without installing additional probes or sensors directly in the well, simplifying installation compared with solutions that require separate sensor wiring.
Where can I buy the 6" SPINOX submersible pump manufactured by Dambat?
Dambat does not sell directly. The 6" SPINOX pump is available from our sales partners, plumbing wholesalers, and authorized online distributors.
What warranty terms apply to the 6" SPINOX pump with an IPRO water-cooled motor?
IPRO – 36 months (3 years) of manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
