Description
6" SPINOX 46-14 (22 kW, 400 V) – a multistage stainless-steel submersible pump with an IPRO oil-filled motor
6" SPINOX with an IPRO oil-filled motor is a multistage submersible pump made entirely of AISI 304 stainless steel, intended for drawing and pumping technically clean water raw water from drilled deep-water intakes with a minimum internal diameter of 160 mm. The pump is powered by an IOM oil-filled motor from IPRO. The series includes a range of models with varying hydraulic parameters and a wide power range, allowing the model to be selected according to the requirements of a specific, high-capacity installation.
For whom
- Farms and orchards with high water demand – the capacity of 415 l/min allows extensive irrigation systems for fields, orchards, and covered crops to be supplied from a single intake.
- Managers of multi-family buildings and housing estates – a single deep-water intake can supply several buildings or an entire community with domestic water in locations without access to the municipal network.
- Water supply and fire protection system contractors – the increased flow rate is suitable for systems requiring large quantities of water, including hydrant systems and fire water tanks.
- Industrial plants and companies carrying out drainage works – drawing technical water for processes and draining excavations and areas with high groundwater levels.
Applications
- Drawing and pumping raw water from larger-diameter drilled deep wells before treatment.
- Supplying water to multi-family buildings, housing estates, and farms with high demand.
- Supplying extensive irrigation and sprinkler systems and lowering groundwater levels.
- Water supply and fire protection systems requiring increased flow capacity.
Depending on the output of the selected model, 6" SPINOX pumps with an IPRO oil-filled motor is suitable both for supplying a single larger facility and for installations serving several buildings or larger-scale irrigation systems. The submersible pump 6" SPINOX 46-14 (22 kW, 400 V) with an IPRO oil-filled motor is individually selected for parameters of a specific well – its depth, diameter and required capacity.
The 6" SPINOX pump is not a water treatment device and does not confirm the its suitability for human consumption must be ensured – if the water is to be used for drinking, cooking or other household purposes, an appropriate treatment system and quality control of the water at the point of collection.
Features, description and technical data
The 6" SPINOX with an IPRO oil-filled motor is a multistage submersible pump in which all key structural components – the suction and discharge connections, housing, shaft, impeller and diffuser – are made of AISI 304 stainless steel. This design provides increased providing increased wear resistance and a long service life when operating in contact with raw water, which may may contain fine mineral impurities. The mechanical seal is made in a ceramic / SiC / NBR configuration. The pump is factory-fitted with a check valve, preventing water from flowing back into the discharge pipeline after the pump stops.
The drive is provided by an IPRO IOM oil-filled motor, cooled and lubricated by the oil located in a sealed motor chamber. The length of the power cable is selected for the specific depending on the device variant and well depth. The pump operates continuously in a vertical position or horizontal, at a maximum pumped liquid temperature of 35°C and insulation class F.
- Device type: multistage submersible pump
- Motor IPRO: IPRO (IOM oil-filled motor)
- Model: 6" SPINOX 46-14
- Motor power: 22 kW
- Power supply: 400 V
- Motor design: oil-filled
- Set diameter: 131 mm (with a 4" motor) / 145 mm (with a 6" motor)
- Minimum well diameter: 160 mm
- Materials: suction/discharge connection, housing, shaft, impeller, diffuser – AISI 304 stainless steel; mechanical seal – ceramic / SiC / NBR
- Motor speed: 2850 rpm
- Max. pumped liquid temperature: 35°C
- Protection rating: IP68
- Operating mode: continuous
- Operating position: vertical / horizontal
- Built-in check valve: yes
Technical data may vary depending on the production batch; before installation, we recommend checking the device's rating plate.
IPRO – 36 months (3 years) of manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certifications.
Frequently Asked Questions (FAQ) – 6" SPINOX deep-well pump with an IPRO oil-filled motor
What is the 6" SPINOX deep-well pump with an IPRO oil-filled motor used for?
The 6" SPINOX with an IPRO oil-filled motor is a multistage deep-well pump designed for drawing and pumping raw/untreated water from drilled deep wells of larger diameter, before the treatment process – including for supplying multi-family buildings, farms, as well as water supply and fire protection systems.
How do I choose the right 6" SPINOX model for my well?
Model selection depends on the well's depth and diameter and the required system capacity – the series includes several hydraulic subcategories with different maximum capacities and power ratings.
What motors are available for the 6" SPINOX deep-well pump?
The 6" SPINOX hydraulics can be paired with a 4" or 6" diameter motor, depending on the model – with an IPRO WMC water-filled motor, an IPRO IOM oil-filled motor, or an oil-filled an Italian IBO Italy motor. The specific variant (motor type and diameter) is indicated in the product name.
How can I protect the 6" SPINOX pump against dry running?
The pump can work with dry-run protection that operates without the need to install additional probes or sensors directly in the well, simplifying installation compared with solutions requiring separate sensor wiring.
Where can I buy the 6" SPINOX deep-well pump manufactured by Dambat?
Dambat does not sell directly. The 6" SPINOX pump is available from our trade partners, plumbing wholesalers, and authorized distributors online.
What warranty terms apply to the 6" SPINOX pump with an IPRO oil-filled motor?
IPRO – 36 months (3 years) of manufacturer's warranty. Warranty and post-warranty service provided by Dambat.
- Diameter: 6”,
- Lift: 189.0 m,
- Capacity: 1035.0 l/min.,
- Power: 22.0 kW,
- Power supply: 300–400 V,
- Frequency: 50 Hz,
- Current: 50.3 A,
- Motor speed: 2850 rpm,
- Insulation class: F,
- Operating mode: continuous,
- Protection rating: IP68,
- Connection [DN/cale]: 4,
- Operating position: Vertical,
- Max. liquid temperature: 35°C,
- Max. number of starts per hour: ,
- Max. immersion depth: 150 m,
- Power cable length: 1.5 m,
- Diameter/height dimensions: 145/2917 mm,
- Weight: 119.5 kg,
----------
MATERIALS
• Suction/discharge connection: AISI 304 stainless steel,
• Housing: AISI 304 stainless steel,
• Shaft and rotor: AISI 304 stainless steel,
• Impeller: AISI 304 stainless steel,
• Diffuser: AISI 304 stainless steel,
• Mechanical seal: Ceramic/SiC/NBR,
• Water-cooled motor.
6" SPINOX 46-14 (22 kW, 400 V) – a multistage stainless-steel submersible pump with an IPRO oil-filled motor
6" SPINOX with an IPRO oil-filled motor is a multistage submersible pump made entirely of AISI 304 stainless steel, intended for drawing and pumping technically clean water raw water from drilled deep-water intakes with a minimum internal diameter of 160 mm. The pump is powered by an IOM oil-filled motor from IPRO. The series includes a range of models with varying hydraulic parameters and a wide power range, allowing the model to be selected according to the requirements of a specific, high-capacity installation.
For whom
- Farms and orchards with high water demand – the capacity of 415 l/min allows extensive irrigation systems for fields, orchards, and covered crops to be supplied from a single intake.
- Managers of multi-family buildings and housing estates – a single deep-water intake can supply several buildings or an entire community with domestic water in locations without access to the municipal network.
- Water supply and fire protection system contractors – the increased flow rate is suitable for systems requiring large quantities of water, including hydrant systems and fire water tanks.
- Industrial plants and companies carrying out drainage works – drawing technical water for processes and draining excavations and areas with high groundwater levels.
Applications
- Drawing and pumping raw water from larger-diameter drilled deep wells before treatment.
- Supplying water to multi-family buildings, housing estates, and farms with high demand.
- Supplying extensive irrigation and sprinkler systems and lowering groundwater levels.
- Water supply and fire protection systems requiring increased flow capacity.
Depending on the output of the selected model, 6" SPINOX pumps with an IPRO oil-filled motor is suitable both for supplying a single larger facility and for installations serving several buildings or larger-scale irrigation systems. The submersible pump 6" SPINOX 46-14 (22 kW, 400 V) with an IPRO oil-filled motor is individually selected for parameters of a specific well – its depth, diameter and required capacity.
The 6" SPINOX pump is not a water treatment device and does not confirm the its suitability for human consumption must be ensured – if the water is to be used for drinking, cooking or other household purposes, an appropriate treatment system and quality control of the water at the point of collection.
Features, description and technical data
The 6" SPINOX with an IPRO oil-filled motor is a multistage submersible pump in which all key structural components – the suction and discharge connections, housing, shaft, impeller and diffuser – are made of AISI 304 stainless steel. This design provides increased providing increased wear resistance and a long service life when operating in contact with raw water, which may may contain fine mineral impurities. The mechanical seal is made in a ceramic / SiC / NBR configuration. The pump is factory-fitted with a check valve, preventing water from flowing back into the discharge pipeline after the pump stops.
The drive is provided by an IPRO IOM oil-filled motor, cooled and lubricated by the oil located in a sealed motor chamber. The length of the power cable is selected for the specific depending on the device variant and well depth. The pump operates continuously in a vertical position or horizontal, at a maximum pumped liquid temperature of 35°C and insulation class F.
- Device type: multistage submersible pump
- Motor IPRO: IPRO (IOM oil-filled motor)
- Model: 6" SPINOX 46-14
- Motor power: 22 kW
- Power supply: 400 V
- Motor design: oil-filled
- Set diameter: 131 mm (with a 4" motor) / 145 mm (with a 6" motor)
- Minimum well diameter: 160 mm
- Materials: suction/discharge connection, housing, shaft, impeller, diffuser – AISI 304 stainless steel; mechanical seal – ceramic / SiC / NBR
- Motor speed: 2850 rpm
- Max. pumped liquid temperature: 35°C
- Protection rating: IP68
- Operating mode: continuous
- Operating position: vertical / horizontal
- Built-in check valve: yes
Technical data may vary depending on the production batch; before installation, we recommend checking the device's rating plate.
IPRO – 36 months (3 years) of manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certifications.
Frequently Asked Questions (FAQ) – 6" SPINOX deep-well pump with an IPRO oil-filled motor
What is the 6" SPINOX deep-well pump with an IPRO oil-filled motor used for?
The 6" SPINOX with an IPRO oil-filled motor is a multistage deep-well pump designed for drawing and pumping raw/untreated water from drilled deep wells of larger diameter, before the treatment process – including for supplying multi-family buildings, farms, as well as water supply and fire protection systems.
How do I choose the right 6" SPINOX model for my well?
Model selection depends on the well's depth and diameter and the required system capacity – the series includes several hydraulic subcategories with different maximum capacities and power ratings.
What motors are available for the 6" SPINOX deep-well pump?
The 6" SPINOX hydraulics can be paired with a 4" or 6" diameter motor, depending on the model – with an IPRO WMC water-filled motor, an IPRO IOM oil-filled motor, or an oil-filled an Italian IBO Italy motor. The specific variant (motor type and diameter) is indicated in the product name.
How can I protect the 6" SPINOX pump against dry running?
The pump can work with dry-run protection that operates without the need to install additional probes or sensors directly in the well, simplifying installation compared with solutions requiring separate sensor wiring.
Where can I buy the 6" SPINOX deep-well pump manufactured by Dambat?
Dambat does not sell directly. The 6" SPINOX pump is available from our trade partners, plumbing wholesalers, and authorized distributors online.
What warranty terms apply to the 6" SPINOX pump with an IPRO oil-filled motor?
IPRO – 36 months (3 years) of manufacturer's warranty. Warranty and post-warranty service provided by Dambat.