6" SPINOX 46-12 (18.5 kW, 400 V) - multistage stainless steel deep well pump, IPRO water-filled motor
The 6" SPINOX with an IPRO water-filled motor is a multistage deep well pump made entirely of AISI 304 stainless steel, designed for drawing and pumping clean raw water from drilled deep wells with a minimum internal diameter of 160 mm. The pump is driven by an IPRO WMC water-filled motor. The series includes a range of models with different hydraulic specifications and a wide range of power ratings, allowing you to select a model to suit the needs of a specific high-output installation.
Who it's for
-
Farms and orchards with high water demand – the output of 415 l/min can supply extensive irrigation systems for fields, orchards and covered crops from a single water source.
-
Managers of multi-family buildings and housing estates – a single deep well can supply utility water to several buildings or an entire housing association in locations without access to the municipal network.
-
Water supply and fire protection system contractors – the increased flow rate is suitable for systems requiring large volumes of water, including hydrant systems and fire protection tanks.
-
Industrial plants and companies carrying out drainage work – drawing technical water for processes and draining excavations and areas with high groundwater levels.
Applications
- Intake and pumping of raw water from larger-diameter drilled deep wells before treatment.
- Water supply for multi-family buildings, housing estates and farms with high demand.
- Supplying extensive irrigation and sprinkler systems and lowering groundwater levels.
- Water supply and fire protection systems requiring increased flow rates.
With performance depending on the selected model, 6" SPINOX pumps with IPRO water-filled motors are suitable for supplying a single large facility, as well as for installations serving several buildings or large-scale irrigation systems. The 6" SPINOX 46-12 submersible pump (18.5 kW, 400 V) with an IPRO water-filled motor is individually selected to suit the specifications of the specific well - its depth, diameter and required capacity.
The 6" SPINOX pump is not a water treatment device and does not certify
that the water is fit for human consumption. If the water is to be used for drinking,
cooking or other household purposes, an appropriate water treatment system and
water quality testing at the point of use must be provided.
Features, description and technical specifications
The 6" SPINOX with an IPRO water-filled motor is a multistage submersible pump in which all
key structural components – the suction and discharge connections, housing, shaft, impeller and
diffuser – are made of AISI 304 stainless steel. This design provides increased
wear resistance and a long service life when operating in contact with raw water, which may
contain fine mineral contaminants. The mechanical seal is made of ceramic / SiC / NBR.
The pump is factory-fitted with a check valve,
preventing water from flowing back through the discharge pipe after the pump stops.
The pump is driven by an IPRO WMC water-filled motor. The power cable length is selected
for the specific device variant and well depth. The pump operates continuously,
in a vertical or horizontal position, at a maximum pumped liquid temperature of 35°C
and insulation class F.
- Device type: multistage submersible pump
- Motor brand: IPRO (WMC water-filled motor)
- Model: 6" SPINOX 46-12
- Motor power: 18.5 kW
- Power supply: 400 V
- Motor design: water-filled
- Unit diameter: 131 mm (with 4" motor) / 145 mm (with 6" motor)
- Minimum well diameter: 160 mm
- Materials: suction/discharge connection, housing, shaft, impeller, diffuser – AISI 304 stainless steel; mechanical seal – ceramic / SiC / NBR
- Motor speed: 2850 rpm
- Max. pumped liquid temperature: 35°C
- Protection rating: IP68
- Operating mode: continuous
- Operating position: vertical / horizontal
- Built-in check valve: yes
Technical data may vary depending on the production batch - before installation, we recommend checking the device's rating plate.
IPRO - 36 months (3 years) manufacturer's warranty. Warranty and post-warranty service provided by Dambat.
Dambat - a trusted manufacturer of pumps and hydrotechnical equipment with quality certifications.
Frequently asked questions (FAQ) - 6" SPINOX submersible pump with an IPRO water-filled motor
What is the 6" SPINOX submersible pump with an IPRO water-filled motor used for?
The 6" SPINOX with an IPRO water-filled motor is a multistage submersible pump designed to draw
and pump raw / untreated water from larger-diameter deep drilled wells before treatment - including
for supplying multi-family buildings, farms, and water supply and fire protection systems.
How do I choose the right 6" SPINOX model for my well?
Model selection depends on the well's depth and diameter and the required system capacity -
the series includes several hydraulic subcategories with different maximum capacities and power ratings.
What motors are available for the 6" SPINOX submersible pump?
The 6" SPINOX hydraulic section can be paired with a 4" or 6" motor - depending on the
model - with an IPRO WMC water-filled motor, an IPRO IOM oil-filled motor, or an oil-filled
motor from the Italian brand IBO Italy. The specific variant (motor type and diameter) is indicated
in the product name.
How can I protect the 6" SPINOX pump from running dry?
The pump can be used with dry-run protection that operates without
requiring additional probes or sensors to be installed directly in the well, simplifying
installation compared with solutions that require separate sensor wiring.
Where can I buy a 6" SPINOX submersible pump manufactured by Dambat?
Dambat does not sell directly. The 6" SPINOX pump is available from our
trade partners, plumbing wholesalers, and authorized online distributors.
What warranty conditions apply to the 6" SPINOX pump with an IPRO water-filled motor?
IPRO - 36 months (3 years) manufacturer's warranty. Warranty and post-warranty service provided by Dambat.
