6" SPINOX 36-8 (9.2 kW, 400 V) - multistage stainless steel deep well pump with an IPRO oil-filled motor
The 6" SPINOX with an IPRO oil-filled motor is a multistage deep well pump made entirely of AISI 304 stainless steel, designed for drawing and pumping clean, untreated water from drilled deep wells with a minimum internal diameter of 160 mm. The pump is driven by an IOM oil-filled motor made by IPRO. The series includes a range of models with varying hydraulic parameters and a wide range of power ratings, allowing you to choose a model to suit the needs of a specific high-capacity system.
Who it's for
-
Farms and orchards with high water demand - a capacity of 415 l/min can supply extensive irrigation systems for fields, orchards, and covered crops from a single water source.
-
Managers of multi-family buildings and residential communities - a single deep well can supply domestic water to several buildings or an entire community in locations without access to the municipal water network.
-
Water supply and fire protection system contractors - the increased flow rate is suitable for systems requiring large amounts of water, including hydrant systems and fire water tanks.
-
Industrial plants and companies carrying out dewatering work - drawing process water and dewatering excavations and sites with high groundwater levels.
Applications
- Drawing and pumping untreated water from larger-diameter drilled deep wells before treatment.
- Supplying water to multi-family buildings, residential communities, and farms with high water demand.
- Supplying extensive irrigation and sprinkler systems, and lowering groundwater levels.
- Water supply and fire protection systems requiring increased flow rates.
W Depending on the output of the selected model, 6" SPINOX pumps with an IPRO oil-filled motor are suitable for supplying a single large facility, as well as for systems serving several buildings or large-scale irrigation systems. The 6" SPINOX 36-8 deep well pump (9.2 kW, 400 V) with an IPRO oil-filled motor is individually selected to match the parameters of the specific well - its depth, diameter, and required output.
The 6" SPINOX pump is not a water treatment device and does not certify that the water is fit for human consumption. If the water is to be used for drinking, cooking, or other household purposes, an appropriate water treatment system and water quality monitoring at the point of use must be provided.
Features, description and technical data
The 6" SPINOX with an IPRO oil-filled motor is a multistage submersible pump in which all key structural components – the suction and discharge ports, housing, shaft, impeller, and diffuser – are made of AISI 304 stainless steel. This construction provides increased wear resistance and a long service life when operating in contact with raw water, which may contain fine mineral contaminants. The mechanical seal uses a ceramic / SiC / NBR arrangement. The pump comes factory-equipped with a check valve to prevent water from flowing back through the discharge pipe after the pump stops.
The pump is driven by an IPRO IOM oil-filled motor, cooled and lubricated by oil in a sealed motor chamber. The power cable length is selected for the specific device variant and well depth. The pump operates continuously, in a vertical or horizontal position, at a maximum pumped liquid temperature of 35°C and insulation class F.
- Device type: multistage submersible pump
- IPRO motor: IPRO (IOM oil-filled motor)
- Model: 6" SPINOX 36-8
- Motor power: 9.2 kW
- Power supply: 400 V
- Motor construction: oil-filled
- Set diameter: 131 mm (with 4" motor) / 145 mm (with 6" motor)
- Minimum well diameter: 160 mm
- Materials: suction/discharge ports, housing, shaft, impeller, diffuser – AISI 304 stainless steel; mechanical seal – ceramic / SiC / NBR
- Motor speed: 2850 rpm
- Max. pumped liquid temperature: 35°C
- Protection rating: IP68
- Operating mode: continuous
- Operating position: vertical / horizontal
- Built-in check valve: yes
Technical data may vary depending on the production batch – before installation, we recommend checking the device’s nameplate.
IPRO – 36 months (3 years) manufacturer’s warranty. Dambat provides warranty and post-warranty service.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certifications.
Frequently Asked Questions (FAQ) – 6" SPINOX submersible pump with an IPRO oil-filled motor
What is the 6" SPINOX submersible pump with an IPRO oil-filled motor used for?
The 6" SPINOX with an IPRO oil-filled motor is a multistage submersible pump designed to
draw and pump raw / untreated water from larger-diameter deep-drilled wells, before treatment –
including for supplying multifamily buildings,
farms, and water supply and fire protection systems.
How do I choose the right 6" SPINOX model for my well?
The model selection depends on the well’s depth and diameter and the required system capacity –
the series includes several hydraulic subcategories with different maximum capacities and power ratings.
What motors are available for the 6" SPINOX submersible pump?
The 6" SPINOX hydraulic section can be paired with a 4" or 6" motor, depending on the
model: an IPRO WMC water-filled motor, an IPRO IOM oil-filled motor, or an oil-filled motor
from the Italian brand IBO Italy. The specific variant (motor type and diameter) is indicated
in the product name.
How can I protect the 6" SPINOX pump from running dry?
The pump can be used with dry-run protection that works without
installing additional probes or sensors directly in the well, simplifying
installation compared with solutions that require separate sensor wiring.
Where can I buy the 6" SPINOX submersible pump manufactured by Dambat?
Dambat does not sell directly. The 6" SPINOX pump is available from our
sales partners, plumbing wholesalers, and authorized online distributors.
What warranty terms apply to the 6" SPINOX pump with an IPRO oil-filled motor?
IPRO – 36 months (3 years) manufacturer’s warranty. Dambat provides warranty and post-warranty service.
