6" SPINOX 36-6 (7.5 kW, 400 V) - multistage stainless steel submersible pump, IPRO water-filled motor
The 6" SPINOX with an IPRO water-filled motor is a multistage submersible pump made entirely of AISI 304 stainless steel, designed to draw and pump technically clean raw water from drilled deep wells with a minimum internal diameter of 160 mm. The pump is driven by an IPRO WMC water-filled motor. The series includes a range of models with varying hydraulic parameters and a wide power range, allowing you to choose a model to suit the needs of a specific high-capacity installation.
Who it's for
-
Farms and orchards with high water demand - a capacity of 415 l/min makes it possible to supply extensive irrigation systems for fields, orchards and covered crops from a single water source.
-
Managers of multi-family buildings and residential developments - a single deep well can supply utility water to several buildings or an entire community in locations without access to the municipal network.
-
Water supply and fire protection system contractors - the increased flow capacity is suitable for systems requiring large volumes of water, including hydrant systems and fire water tanks.
-
Industrial plants and companies carrying out drainage work - drawing technical water for processes and draining excavations and areas with high groundwater levels.
Applications
- Drawing and pumping raw water from larger-diameter drilled deep wells before treatment.
- Supplying water to multi-family buildings, residential developments and farms with high demand.
- Supplying extensive irrigation and sprinkler systems, and lowering groundwater levels.
- Water supply and fire protection systems requiring increased flow capacity.
With output depending on the capacity of the selected model, 6" SPINOX pumps with IPRO water-filled motors are suitable for supplying a single large facility as well as installations serving several buildings or large-scale irrigation systems. The 6" SPINOX 36-6 submersible pump (7.5 kW, 400 V) with an IPRO water-filled motor is selected individually to match the parameters of the specific well - its depth, diameter and required capacity.
The 6" SPINOX pump is not a water treatment device and does not certify
that the water is suitable for human consumption – if the water is to be used for drinking,
cooking or other household purposes, an appropriate water treatment system must be provided, along with
water quality monitoring at the point of use.
Features, description and technical data
The 6" SPINOX with an IPRO water-filled motor is a multistage submersible pump whose key
structural components – suction and discharge ports, housing, shaft, impeller and
diffuser – are all made of AISI 304 stainless steel. This construction provides increased
wear resistance and a long service life when handling raw water that may
contain fine mineral contaminants. The mechanical seal uses a ceramic / SiC / NBR
configuration. The pump is factory-fitted with a check valve
to prevent water from flowing back through the discharge pipe after the pump stops.
The pump is powered by an IPRO WMC water-filled motor. The power cable length is selected
to suit the specific device variant and well depth. The pump operates continuously,
in a vertical or horizontal position, at a maximum pumped liquid temperature of 35°C
and insulation class F.
- Device type: multistage submersible pump
- Motor brand: IPRO (WMC water-filled motor)
- Model: 6" SPINOX 36-6
- Motor power: 7.5 kW
- Power supply: 400 V
- Motor design: water-filled
- Set diameter: 131 mm (with 4" motor) / 145 mm (with 6" motor)
- Minimum well diameter: 160 mm
- Materials: suction/discharge ports, housing, shaft, impeller, diffuser – AISI 304 stainless steel; mechanical seal – ceramic / SiC / NBR
- Motor speed: 2850 rpm
- Max. pumped liquid temperature: 35°C
- Protection rating: IP68
- Operating mode: continuous
- Operating position: vertical / horizontal
- Built-in check valve: yes
Technical data may vary depending on the production batch - we recommend checking the device's rating plate before installation.
IPRO - 36-month (3-year) manufacturer's warranty. Warranty and post-warranty service provided by Dambat.
Dambat - a trusted manufacturer of pumps and hydrotechnical equipment with quality certifications.
Frequently asked questions (FAQ) - 6" SPINOX submersible pump with an IPRO water-filled motor
What is the 6" SPINOX submersible pump with an IPRO water-filled motor used for?
The 6" SPINOX with an IPRO water-filled motor is a multistage submersible pump designed to draw
and pump raw / untreated water from larger-diameter deep boreholes before treatment - including
for supplying multi-unit buildings, farms, and water supply and fire protection systems.
How do I choose the right 6" SPINOX model for my well?
The model choice depends on the well's depth and diameter and the required system capacity -
the series includes several hydraulic subcategories with different maximum capacities and power ratings.
What motors are available for the 6" SPINOX submersible pump?
The 6" SPINOX hydraulics can be paired with a 4" or 6" motor, depending on the
model: an IPRO WMC water-filled motor, an IPRO IOM oil-filled motor, or an oil-filled motor
from the Italian brand IBO Italy. The specific option (motor type and diameter) is indicated
in the product name.
How can I protect the 6" SPINOX pump from running dry?
The pump can be used with dry-run protection that works without
requiring additional probes or sensors to be installed directly in the well, simplifying
installation compared with solutions that require separate sensor wiring.
Where can I buy the 6" SPINOX submersible pump manufactured by Dambat?
Dambat does not sell directly. The 6" SPINOX pump is available from our
sales partners, plumbing wholesalers, and authorized online distributors.
What are the warranty terms for the 6" SPINOX pump with an IPRO water-filled motor?
IPRO - 36-month (3-year) manufacturer's warranty. Warranty and post-warranty service provided by Dambat.
