6" SPINOX 36-13 (15 kW, 400 V) - multistage stainless steel submersible pump with an IPRO water-filled motor
The 6" SPINOX with an IPRO water-filled motor is a multistage submersible pump made entirely of AISI 304 stainless steel, designed for drawing and pumping technically clean raw water from drilled deep wells with a minimum internal diameter of 160 mm. The pump is driven by an IPRO WMC water-filled motor. The range includes a number of models with different hydraulic parameters and a wide power range, allowing the model to be selected to suit the requirements of a specific high-capacity installation.
Who it's for
-
Farms and orchards with high water demand - a capacity of 415 l/min makes it possible to supply extensive irrigation systems for fields, orchards and covered crops from a single source.
-
Managers of multi-family buildings and housing estates - a single deep well can supply utility water to several buildings or an entire community in locations without access to the municipal water network.
-
Water supply and fire protection system contractors - the increased flow rate is suitable for systems requiring large volumes of water, including hydrant systems and fire water tanks.
-
Industrial plants and companies carrying out drainage work - drawing technical water for processes, and draining excavations and areas with high groundwater levels.
Applications
- Drawing and pumping raw water from larger-diameter drilled deep wells before treatment.
- Water supply for multi-family buildings, housing estates and farms with high demand.
- Supplying extensive irrigation and sprinkler systems, and lowering groundwater levels.
- Water supply and fire protection systems requiring increased flow rates.
Depending on the capacity of the selected model, 6" SPINOX pumps with an IPRO water-cooled motor are suitable for supplying a single, larger facility as well as installations serving several buildings or large-scale irrigation systems. The 6" SPINOX 36-13 submersible pump (15 kW, 400 V) with an IPRO water-cooled motor is selected individually to match the specifications of the particular well - its depth, diameter, and required capacity.
The 6" SPINOX pump is not a water treatment device and does not certify that the water
is suitable for human consumption. If the water is to be used for drinking,
cooking or other household purposes, an appropriate water treatment system and
water quality monitoring at the point of use must be provided.
Features, description and technical data
The 6" SPINOX with an IPRO water-filled motor is a multistage deep-well pump in which all
key structural components – the suction and discharge connections, housing, shaft, impeller and
diffuser – are made of AISI 304 stainless steel. This construction provides increased
wear resistance and a long service life when operating in contact with raw water, which may
contain fine mineral impurities. The mechanical seal uses a ceramic / SiC / NBR configuration.
The pump is factory-fitted with a check valve to prevent water from flowing back in the discharge
pipe after the pump stops.
The pump is driven by an IPRO WMC water-filled motor. The power cable length is selected
for the specific device variant and well depth. The pump operates in continuous mode,
in a vertical or horizontal position, at a maximum pumped liquid temperature of 35°C
and with insulation class F.
- Device type: multistage deep-well pump
- Motor brand: IPRO (WMC water-filled motor)
- Model: 6" SPINOX 36-13
- Motor power: 15 kW
- Power supply: 400 V
- Motor design: water-filled
- Pump set diameter: 131 mm (with 4" motor) / 145 mm (with 6" motor)
- Minimum well diameter: 160 mm
- Materials: suction/discharge connection, housing, shaft, impeller, diffuser – AISI 304 stainless steel; mechanical seal – ceramic / SiC / NBR
- Motor speed: 2850 rpm
- Max. pumped liquid temperature: 35°C
- Protection rating: IP68
- Operating mode: continuous
- Operating position: vertical / horizontal
- Built-in check valve: yes
Technical specifications may vary by production batch. Before installation, we recommend checking the device’s nameplate.
IPRO – 36 months (3 years) manufacturer’s warranty. Warranty and post-warranty service provided by Dambat.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certifications.
Frequently asked questions (FAQ) – 6" SPINOX submersible pump with an IPRO water-filled motor
What is the 6" SPINOX submersible pump with an IPRO water-filled motor used for?
The 6" SPINOX with an IPRO water-filled motor is a multistage submersible pump designed to draw and pump raw/untreated water from larger-diameter drilled deep wells before treatment. It is intended, among other uses, to supply multifamily buildings, farms, and water supply and fire protection systems.
How do I choose the right 6" SPINOX model for my well?
The right model depends on the well’s depth and diameter and the installation’s required flow rate. The series includes several hydraulic subcategories with different maximum flow rates and power ratings.
Which motors are available for the 6" SPINOX submersible pump?
The 6" SPINOX hydraulic section can be paired with a 4" or 6" motor, depending on the model: an IPRO WMC water-filled motor, an IPRO IOM oil-filled motor, or an oil-filled motor from the Italian brand IBO Italy. The specific variant (motor type and diameter) is indicated in the product name.
How can I protect the 6" SPINOX pump against dry running?
The pump can be used with dry-run protection that works without installing additional probes or sensors directly in the well, simplifying installation compared with solutions that require separate sensor wiring.
Where can I buy the 6" SPINOX submersible pump manufactured by Dambat?
Dambat does not sell directly. The 6" SPINOX pump is available from our business partners, plumbing wholesalers, and authorized online distributors.
What warranty terms apply to the 6" SPINOX pump with an IPRO water-filled motor?
IPRO – 36 months (3 years) manufacturer’s warranty. Warranty and post-warranty service provided by Dambat.
