6" SPINOX 30-7 (7.5 kW, 400 V) - multistage stainless steel submersible pump, IPRO water-filled motor
The 6" SPINOX with an IPRO water-filled motor is a multistage submersible pump made entirely of AISI 304 stainless steel, designed for drawing and pumping clean, untreated water from drilled deep wells with a minimum internal diameter of 160 mm. The pump is driven by an IPRO WMC water-filled motor. The series includes a range of models with different hydraulic parameters and a wide range of power ratings, allowing you to choose a model to suit the needs of a specific high-output installation.
Who it's for
-
Farms and orchards with high water demand – an output of 415 l/min can supply extensive irrigation systems for fields, orchards and crops grown under cover from a single water source.
-
Managers of multi-family buildings and housing developments – a single deep well can supply several buildings or an entire community with domestic water in locations without access to the municipal water network.
-
Water supply and fire protection system contractors – the increased flow rate is suitable for systems requiring large volumes of water, including hydrant systems and fire protection tanks.
-
Industrial plants and companies carrying out dewatering work – drawing process water and dewatering excavations and areas with high groundwater levels.
Applications
- Drawing and pumping raw water from larger-diameter drilled deep wells before treatment.
- Supplying water to multi-family buildings, housing developments and farms with high demand.
- Supplying extensive irrigation and sprinkler systems, and lowering groundwater levels.
- Water supply and fire protection systems requiring increased flow rates.
Depending on the capacity of the selected model, 6" SPINOX pumps with an IPRO water-cooled motor are suitable for supplying a single larger facility, as well as installations serving several buildings or large-scale irrigation systems. The 6" SPINOX 30-7 deep-well pump (7.5 kW, 400 V) with an IPRO water-cooled motor is selected individually based on the specifications of the particular well—its depth, diameter, and required capacity.
The 6" SPINOX pump is not a water treatment device and does not certify
that the water is suitable for human consumption – if the water is to be used for drinking,
cooking or other household purposes, an appropriate treatment system and
water quality monitoring at the point of use must be provided.
Features, description and technical data
The 6" SPINOX with an IPRO water-filled motor is a multistage submersible pump in which all
key structural components – the suction and discharge connectors, housing, shaft, impeller, and
diffuser – are made of AISI 304 stainless steel. This design provides increased
wear resistance and a long service life when operating in contact with raw water, which may
contain fine mineral contaminants. The mechanical seal is made of ceramic / SiC / NBR. The pump
is factory-equipped with a check valve to prevent water from flowing back in the discharge
pipeline after the pump stops.
The pump is driven by an IPRO WMC water-filled motor. The power cable length is selected
for the specific device variant and well depth. The pump operates continuously,
in a vertical or horizontal position, at a maximum pumped liquid temperature of 35°C
and insulation class F.
- Device type: multistage submersible pump
- Motor brand: IPRO (WMC water-filled motor)
- Model: 6" SPINOX 30-7
- Motor power: 7.5 kW
- Power supply: 400 V
- Motor design: water-filled
- Set diameter: 131 mm (with 4" motor) / 145 mm (with 6" motor)
- Minimum well diameter: 160 mm
- Materials: suction/discharge connector, housing, shaft, impeller, diffuser – AISI 304 stainless steel; mechanical seal – ceramic / SiC / NBR
- Motor speed: 2850 rpm
- Max. pumped liquid temperature: 35°C
- Protection rating: IP68
- Operating mode: continuous
- Operating position: vertical / horizontal
- Built-in check valve: yes
Technical specifications may vary depending on the production batch – before installation, we recommend checking the device's nameplate.
IPRO – 36 months (3 years) manufacturer's warranty. Warranty and post-warranty service provided by Dambat.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – 6" SPINOX submersible pump with an IPRO water-filled motor
What is the 6" SPINOX submersible pump with an IPRO water-filled motor used for?
The 6" SPINOX with an IPRO water-filled motor is a multistage submersible pump designed to draw
and pump raw / untreated water from larger-diameter drilled deep wells before treatment – for example,
to supply multi-family buildings, farms, and water supply and fire protection systems.
How do I choose the right 6" SPINOX model for my well?
The model selection depends on the well's depth and diameter and the required system capacity –
the series includes several hydraulic subcategories with different maximum capacities and power ratings.
Which motors are available for the 6" SPINOX submersible pump?
The 6" SPINOX hydraulics can be paired with a 4" or 6" diameter motor, depending on the
model: an IPRO WMC water-filled motor, an IPRO IOM oil-filled motor, or an oil-filled motor
from the Italian brand IBO Italy. The specific variant (motor type and diameter) is indicated
in the product name.
How can I protect the 6" SPINOX pump from running dry?
The pump can be used with dry-run protection that works without
requiring additional probes or sensors to be installed directly in the well, simplifying
installation compared with solutions that require separate sensor wiring.
Where can I buy the 6" SPINOX submersible pump manufactured by Dambat?
Dambat does not sell directly. The 6" SPINOX pump is available from our
sales partners, plumbing wholesalers, and authorized online distributors.
What warranty terms apply to the 6" SPINOX pump with an IPRO water-filled motor?
IPRO – 36 months (3 years) manufacturer's warranty. Warranty and post-warranty service provided by Dambat.
