6" SPINOX 30-6 (5.5 kW, 400 V) - multistage stainless steel deep well pump with IPRO oil-filled motor
The 6" SPINOX with an IPRO oil-filled motor is a multistage deep well pump made entirely of AISI 304 stainless steel, designed to draw and pump clean raw water from drilled deep wells with a minimum internal diameter of 160 mm. The pump is powered by an IPRO IOM oil-filled motor. The series includes a range of models with varying hydraulic parameters and a wide range of power ratings, allowing you to select a model to meet the needs of a specific high-capacity installation.
Who it's for
-
Farms and orchards with high water demand – an output of 415 l/min can supply extensive irrigation systems for fields, orchards and covered crops from a single water source.
-
Managers of multi-family buildings and residential developments – a single deep well can supply utility water to several buildings or an entire community in locations without access to the municipal water network.
-
Water supply and fire protection system contractors – the increased flow rate is suitable for systems requiring large volumes of water, including hydrant systems and fire protection tanks.
-
Industrial plants and companies carrying out drainage work – drawing technical water for process needs, as well as dewatering excavations and areas with high groundwater levels.
Applications
- Drawing and pumping raw water from larger-diameter drilled deep wells before treatment.
- Supplying water to multi-family buildings, residential developments and farms with high water demand.
- Supplying extensive irrigation and sprinkler systems, and lowering groundwater levels.
- Water supply and fire protection systems requiring increased flow rates.
With performance varying by model, 6" SPINOX pumps with IPRO oil-filled motors are suitable for supplying a single large facility as well as installations serving several buildings or large-scale irrigation systems. The 6" SPINOX 30-6 deep well pump (5.5 kW, 400 V) with an IPRO oil-filled motor is selected individually to match the specifications of the well, including its depth, diameter and required output.
The 6" SPINOX pump is not a water treatment device and does not certify that the water
is suitable for human consumption. If the water is to be used for drinking,
cooking or other household purposes, an appropriate water treatment system and
water quality monitoring at the point of use must be provided.
Features, description and technical data
The 6" SPINOX with an IPRO oil-filled motor is a multistage submersible pump whose key
structural components – the suction and discharge connections, housing, shaft, impeller and
diffuser – are all made of AISI 304 stainless steel. This design provides increased
resistance to wear and a long service life when operating in contact with raw water, which may
contain fine mineral contaminants. The mechanical seal features a ceramic / SiC / NBR
configuration. The pump is factory-fitted with a check valve to prevent water from flowing
back through the discharge pipe when the pump stops.
The pump is driven by an IPRO IOM oil-filled motor, cooled and lubricated by oil contained
in the sealed motor chamber. The power cable length is selected to suit the specific
device variant and well depth. The pump operates continuously, in a vertical or horizontal
position, at a maximum pumped liquid temperature of 35°C and insulation class F.
- Device type: multistage submersible pump
- Motor IPRO: IPRO (IOM oil-filled motor)
- Model: 6" SPINOX 30-6
- Motor power: 5.5 kW
- Power supply: 400 V
- Motor design: oil-filled
- Set diameter: 131 mm (with 4" motor) / 145 mm (with 6" motor)
- Minimum well diameter: 160 mm
- Materials: suction/discharge connection, housing, shaft, impeller, diffuser – AISI 304 stainless steel; mechanical seal – ceramic / SiC / NBR
- Motor speed: 2850 rpm
- Max. pumped liquid temperature: 35°C
- Protection rating: IP68
- Operating mode: continuous
- Operating position: vertical / horizontal
- Built-in check valve: yes
Technical data may vary depending on the production batch – before installation, we recommend checking the device’s rating plate.
IPRO – 36 months (3 years) manufacturer’s warranty. Dambat provides warranty and post-warranty service.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – 6" SPINOX submersible pump with an IPRO oil-filled motor
What is the 6" SPINOX submersible pump with an IPRO oil-filled motor used for?
The 6" SPINOX with an IPRO oil-filled motor is a multistage submersible pump designed to
draw and pump raw / untreated water from larger-diameter drilled deep wells before treatment – including for supplying multi-family buildings,
farms, and water supply and fire protection systems.
How do I choose the right 6" SPINOX model for my well?
Choosing a model depends on the depth and diameter of the well and the required system capacity –
the series includes several hydraulic subcategories with different maximum capacities and power ratings.
What motors are available for the 6" SPINOX submersible pump?
The 6" SPINOX hydraulics can be paired with a 4" or 6" motor, depending on the
model: an IPRO WMC water-filled motor, an IPRO IOM oil-filled motor, or an oil-filled motor
from the Italian brand IBO Italy. The specific variant (motor type and diameter) is indicated
in the product name.
How can I protect the 6" SPINOX pump from running dry?
The pump can be used with dry-run protection that operates without
requiring additional probes or sensors to be installed directly in the well, simplifying
installation compared with solutions that require separate sensor wiring.
Where can I buy the 6" SPINOX submersible pump made by Dambat?
Dambat does not sell directly. The 6" SPINOX pump is available from our
trading partners, plumbing wholesalers, and authorized online distributors.
What warranty terms apply to the 6" SPINOX pump with an IPRO oil-filled motor?
IPRO – 36 months (3 years) manufacturer’s warranty. Dambat provides warranty and post-warranty service.
