6" SPINOX 30-5 (5.5 kW, 400 V) - multistage stainless steel submersible pump, IPRO oil-filled motor
The 6" SPINOX with an IPRO oil-filled motor is a multistage submersible pump made entirely
of AISI 304 stainless steel, designed for drawing and pumping technically clean raw water
from drilled deep wells with a minimum internal diameter of 160 mm. The pump
is powered by an IPRO IOM oil-filled motor. The series includes a range of models with different
hydraulic parameters and a wide range of power ratings, allowing you to select a model to
meet the needs of a specific high-capacity installation.
Who it's for
-
Farms and orchards with high water demand – the capacity of 415 l/min allows extensive irrigation systems for fields, orchards, and greenhouse crops to be supplied from a single water source.
-
Managers of multi-family buildings and housing estates – a single deep well can supply water to several buildings or an entire community in locations without access to the municipal water network.
-
Water supply and fire protection system contractors – the increased flow rate is suitable for systems requiring large volumes of water, including hydrant systems and fire water tanks.
-
Industrial plants and companies carrying out dewatering work – drawing process water for industrial operations and dewatering excavations and areas with high groundwater levels.
Applications
- Drawing and pumping raw water from larger-diameter drilled deep wells before treatment.
- Supplying water to multi-family buildings, housing estates, and farms with high demand.
- Supplying extensive irrigation and sprinkler systems, and lowering the groundwater level.
- Water supply and fire protection systems requiring increased flow rates.
WDepending on the performance of the selected model, 6" SPINOX pumps with IPRO oil-filled motors
are suitable for supplying a single larger facility as well as installations
serving several buildings or larger-scale irrigation systems. The 6" SPINOX 30-5 submersible pump
(5.5 kW, 400 V) with an IPRO oil-filled motor is individually selected to match the parameters of
the specific well – its depth, diameter, and required output.
The 6" SPINOX pump is not a water treatment device and does not certify that the water
is suitable for human consumption. If the water is to be used for drinking,
cooking or other domestic purposes, an appropriate water treatment system must be provided, along with
water quality monitoring at the point of use.
Features, description and technical data
The 6" SPINOX with an IPRO oil-filled motor is a multistage submersible pump in which all
key structural components – the suction and discharge connections, housing, shaft, impeller and
diffuser – are made of AISI 304 stainless steel. This design provides increased
wear resistance and a long service life when operating in contact with raw water, which may
contain fine mineral contaminants. The mechanical seal is made of ceramic / SiC / NBR.
The pump is factory-fitted with a check valve
to prevent water from flowing back through the discharge pipe after the pump stops.
The pump is driven by an IPRO IOM oil-filled motor, cooled and lubricated by oil contained
in a sealed motor chamber. The power cable length is selected for the specific
device variant and well depth. The pump operates in continuous mode, in a vertical
or horizontal position, at a maximum pumped liquid temperature of 35°C and insulation class F.
- Device type: multistage submersible pump
- IPRO motor: IPRO (IOM oil-filled motor)
- Model: 6" SPINOX 30-5
- Motor power: 5.5 kW
- Power supply: 400 V
- Motor design: oil-filled
- Set diameter: 131 mm (with 4" motor) / 145 mm (with 6" motor)
- Minimum well diameter: 160 mm
- Materials: suction/discharge connection, housing, shaft, impeller, diffuser – AISI 304 stainless steel; mechanical seal – ceramic / SiC / NBR
- Motor speed: 2850 rpm
- Max. pumped liquid temperature: 35°C
- Protection rating: IP68
- Operating mode: continuous
- Installation position: vertical / horizontal
- Built-in check valve: yes
Technical data may vary depending on the production batch. We recommend checking the device's rating plate before installation.
IPRO – 36 months (3 years) manufacturer's warranty. Dambat provides warranty and post-warranty service.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certifications.
Frequently asked questions (FAQ) – 6" SPINOX submersible pump with an IPRO oil-filled motor
What is the 6" SPINOX submersible pump with an IPRO oil-filled motor used for?
The 6" SPINOX with an IPRO oil-filled motor is a multistage submersible pump designed to draw and pump raw/untreated water from large-diameter drilled deep wells before treatment. It is suitable for supplying multifamily buildings, farms, and water supply and fire protection systems, among other uses.
How do I choose the right 6" SPINOX model for my well?
The choice of model depends on the well's depth and diameter and the required system capacity. The series includes several hydraulic subcategories with different maximum capacities and power ratings.
Which motors are available for the 6" SPINOX submersible pump?
The 6" SPINOX hydraulics can be paired with a 4" or 6" motor, depending on the model: an IPRO WMC water-filled motor, an IPRO IOM oil-filled motor, or an oil-filled motor from the Italian brand IBO Italy. The product name specifies the particular version (motor type and diameter).
How can I protect the 6" SPINOX pump from running dry?
The pump can be used with dry-run protection that works without installing additional probes or sensors directly in the well, simplifying installation compared with solutions that require separate sensor wiring.
Where can I buy the 6" SPINOX submersible pump made by Dambat?
Dambat does not sell directly. The 6" SPINOX pump is available from our business partners, plumbing wholesalers and authorized online distributors.
What are the warranty terms for the 6" SPINOX pump with an IPRO oil-filled motor?
IPRO – 36 months (3 years) manufacturer's warranty. Dambat provides warranty and post-warranty service.
