6" SPINOX 30-21 (18.5 kW, 400 V) - multistage stainless steel submersible pump, IPRO water-filled motor
The 6" SPINOX with an IPRO water-filled motor is a multistage submersible pump made entirely of AISI 304 stainless steel, designed for drawing and pumping clean raw water from drilled deep wells with a minimum internal diameter of 160 mm. The pump is driven by an IPRO WMC water-filled motor. The series includes a range of models with different hydraulic specifications and a wide power range, allowing you to choose a model to suit the needs of a specific high-capacity installation.
Who it's for
-
Farms and orchards with high water demand - an output of 415 l/min makes it possible to supply extensive irrigation systems for fields, orchards and covered crops from a single water source.
-
Managers of multi-family buildings and residential complexes - a single deep well can supply several buildings or an entire residential community with domestic water in locations without access to the municipal water network.
-
Water supply and fire protection system contractors - the increased flow rate is suitable for systems requiring large volumes of water, including hydrant systems and fire water tanks.
-
Industrial plants and companies carrying out dewatering work - drawing process water and dewatering excavations and areas with high groundwater levels.
Applications
- Drawing and pumping raw water from larger-diameter drilled deep wells before treatment.
- Water supply for multi-family buildings, residential complexes and farms with high demand.
- Supplying extensive irrigation and sprinkler systems, as well as lowering groundwater levels.
- Water supply and fire protection systems requiring increased flow rates.
Depending on the performance of the selected model, 6" SPINOX pumps with an IPRO water-filled motor are suitable for supplying a single, larger facility, as well as for installations serving several buildings or larger-scale irrigation systems. The 6" SPINOX 30-21 submersible pump (18.5 kW, 400 V) with an IPRO water-filled motor is selected individually to match the specifications of the particular well - its depth, diameter, and required output.
The 6" SPINOX pump is not a water treatment device and does not certify that the water is suitable for human consumption. If the water is to be used for drinking, cooking, or other household purposes, an appropriate water treatment system must be provided, along with water quality monitoring at the point of use.
Features, description and technical data
The 6" SPINOX with an IPRO water-filled motor is a multistage submersible pump in which all key structural components – the suction and discharge nozzles, housing, shaft, impeller, and diffuser – are made of AISI 304 stainless steel. This design provides increased wear resistance and a long service life when operating in contact with raw water, which may contain fine mineral contaminants. The mechanical seal uses a ceramic / SiC / NBR configuration. The pump is factory-fitted with a check valve to prevent water from flowing back through the discharge pipe after the pump stops.
The pump is driven by an IPRO WMC water-filled motor. The power cable length is selected to suit the specific device variant and well depth. The pump operates continuously, in a vertical or horizontal position, at a maximum pumped liquid temperature of 35°C and with insulation class F.
- Device type: multistage submersible pump
- Motor brand: IPRO (WMC water-filled motor)
- Model: 6" SPINOX 30-21
- Motor power: 18.5 kW
- Power supply: 400 V
- Motor design: water-filled
- Set diameter: 131 mm (with 4" motor) / 145 mm (with 6" motor)
- Minimum well diameter: 160 mm
- Materials: suction/discharge nozzle, housing, shaft, impeller, diffuser – AISI 304 stainless steel; mechanical seal – ceramic / SiC / NBR
- Motor speed: 2850 rpm
- Max. temperature of pumped liquid: 35°C
- Protection rating: IP68
- Operating mode: continuous
- Operating position: vertical / horizontal
- Built-in check valve: yes
Technical data may vary depending on the production batch. Before installation, we recommend checking the device’s nameplate.
IPRO – 36 months (3 years) of manufacturer’s warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certifications.
Frequently asked questions (FAQ) – 6" SPINOX deep-well pump with an IPRO water-filled motor
What is the 6" SPINOX deep-well pump with an IPRO water-filled motor used for?
The 6" SPINOX with an IPRO water-filled motor is a multistage deep-well pump designed to draw and pump raw / untreated water from larger-diameter drilled wells before treatment, including for supplying multi-family buildings, farms, and water supply and fire protection systems.
How do I choose the right 6" SPINOX model for my well?
The model selection depends on the well’s depth and diameter and the installation’s required capacity. The series includes several hydraulic subcategories with different maximum capacities and power ratings.
What motors are available for the 6" SPINOX deep-well pump?
The 6" SPINOX hydraulics can be paired with a 4" or 6" diameter motor, depending on the model: an IPRO WMC water-filled motor, an IPRO IOM oil-filled motor, or an oil-filled motor from the Italian brand IBO Italy. The product name specifies the exact version (motor type and diameter).
How can I protect the 6" SPINOX pump from running dry?
The pump can work with dry-run protection that does not require additional probes or sensors to be installed directly in the well, simplifying installation compared with solutions that require separate sensor wiring.
Where can I buy the 6" SPINOX deep-well pump manufactured by Dambat?
Dambat does not sell directly. The 6" SPINOX pump is available from our business partners, plumbing wholesalers, and authorized online distributors.
What warranty terms apply to the 6" SPINOX pump with an IPRO water-filled motor?
IPRO – 36 months (3 years) of manufacturer’s warranty. Warranty and post-warranty service is provided by Dambat.
