6" SPINOX 30-17 (15 kW, 400 V) - multistage stainless steel submersible pump, IPRO water-filled motor
The 6" SPINOX with an IPRO water-filled motor is a multistage submersible pump made entirely of AISI 304 stainless steel, designed to draw and pump clean, technically untreated raw water from drilled deep wells with a minimum internal diameter of 160 mm. The pump is driven by an IPRO WMC water-filled motor. The series includes a range of models with different hydraulic parameters and a wide power range, allowing you to select a model to match the requirements of a specific high-output installation.
Who it's for
-
Farms and orchards with high water demand – an output of 415 l/min can supply extensive irrigation systems for fields, orchards, and covered crops from a single intake.
-
Managers of multifamily buildings and housing estates – a single deep well can supply water to several buildings or an entire community in locations without access to the municipal water network.
-
Water supply and fire protection system contractors – increased flow is suitable for systems requiring large volumes of water, including hydrant systems and fire protection tanks.
-
Industrial plants and companies carrying out dewatering work – drawing technical water for process requirements and dewatering excavations and sites with high groundwater levels.
Applications
- Drawing and pumping raw water from larger-diameter drilled deep wells before treatment.
- Water supply for multifamily buildings, housing estates, and farms with high water demand.
- Supplying extensive irrigation and sprinkler systems and lowering groundwater levels.
- Water supply and fire protection systems requiring increased flow rates.
With performance depending on the selected model, 6" SPINOX pumps with IPRO water-filled motors are suitable both for supplying a single, larger facility and for installations serving several buildings or large-scale irrigation systems. The 6" SPINOX 30-17 submersible pump (15 kW, 400 V) with an IPRO water-filled motor is selected individually to match the parameters of the specific well: its depth, diameter, and required output.
The 6" SPINOX pump does not treat water and does not certify that it is suitable for human consumption – if the water is to be used for drinking, cooking, or other household purposes, an appropriate water treatment system and water quality monitoring at the point of use must be provided.
Features, description, and technical data
The 6" SPINOX with an IPRO water-filled motor is a multistage submersible pump in which all key structural components – the suction and discharge connections, housing, shaft, impeller, and diffuser – are made of AISI 304 stainless steel. This design provides increased wear resistance and a long service life when operating in contact with raw water that may contain fine mineral impurities. The mechanical seal uses a ceramic / SiC / NBR arrangement. The pump is factory-fitted with a check valve to prevent water from flowing back through the discharge pipe after the pump stops.
The pump is powered by an IPRO WMC water-filled motor. The power cable length is selected according to the specific device variant and well depth. The pump operates continuously, in a vertical or horizontal position, at a maximum pumped liquid temperature of 35°C and insulation class F.
- Device type: multistage submersible pump
- Motor brand: IPRO (WMC water-filled motor)
- Model: 6" SPINOX 30-17
- Motor power: 15 kW
- Power supply: 400 V
- Motor design: water-filled
- Unit diameter: 131 mm (with 4" motor) / 145 mm (with 6" motor)
- Minimum well diameter: 160 mm
- Materials: suction/discharge connection, housing, shaft, impeller, diffuser – AISI 304 stainless steel; mechanical seal – ceramic / SiC / NBR
- Motor speed: 2850 rpm
- Max. pumped liquid temperature: 35°C
- Protection rating: IP68
- Operating mode: continuous
- Operating position: vertical / horizontal
- Built-in check valve: yes
Technical data may vary between production batches. We recommend checking the device nameplate before installation.
IPRO – 36-month (3-year) manufacturer’s warranty. Dambat provides warranty and post-warranty service.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certifications.
Frequently asked questions (FAQ) – 6" SPINOX submersible pump with an IPRO water-filled motor
What is the 6" SPINOX submersible pump with an IPRO water-filled motor used for?
The 6" SPINOX with an IPRO water-filled motor is a multistage submersible pump designed to draw and pump raw / untreated water from large-diameter drilled wells before treatment. Applications include supplying multifamily buildings, farms, and water supply and fire protection systems.
How do I choose the right 6" SPINOX model for my well?
Model selection depends on the well’s depth and diameter, as well as the installation’s required output. The series includes several hydraulic subcategories with different maximum outputs and power ratings.
Which motors are available for the 6" SPINOX submersible pump?
The 6" SPINOX hydraulic assembly can be paired, depending on the model, with a 4" or 6" diameter motor: an IPRO WMC water-filled motor, an IPRO IOM oil-filled motor, or an oil-filled motor by the Italian brand IBO Italy. The product name specifies the particular variant (motor type and diameter).
How can I protect the 6" SPINOX pump from dry running?
The pump can be used with dry-run protection that works without requiring additional probes or sensors to be installed directly in the well, simplifying installation compared with solutions that require separate sensor wiring.
Where can I buy the 6" SPINOX submersible pump manufactured by Dambat?
Dambat does not sell directly to customers. The 6" SPINOX pump is available from our retail partners, plumbing wholesalers, and authorized online distributors.
What warranty terms apply to the 6" SPINOX pump with an IPRO water-filled motor?
IPRO – 36-month (3-year) manufacturer’s warranty. Dambat provides warranty and post-warranty service.