6" SPINOX 30-17 (15 kW, 400 V) - multistage stainless steel deep-well pump with IPRO oil-filled motor
The 6" SPINOX with an IPRO oil-filled motor is a multistage deep-well pump made entirely
of AISI 304 stainless steel, designed to draw and pump clean, untreated water
from drilled deep wells with a minimum internal diameter of 160 mm. The pump
is driven by an IPRO IOM oil-filled motor. The series includes a range of models with different
hydraulic parameters and a wide range of power ratings, making it possible to select a model to
meet the needs of a specific high-output installation.
Who it's for
-
Farms and orchards with high water demand - an output of 415 l/min makes it possible to supply extensive irrigation systems for fields, orchards and covered crops from a single water source.
-
Managers of multifamily buildings and housing estates - a single deep-well water source can supply several buildings or an entire community with domestic water in locations without access to the municipal water network.
-
Water supply and fire protection system contractors - the high flow rate is suitable for systems requiring large volumes of water, including hydrant systems and fire water tanks.
-
Industrial plants and companies carrying out drainage work - drawing technical water for process requirements and draining excavations and areas with high groundwater levels.
Applications
- Drawing and pumping raw water from large-diameter drilled deep wells before treatment.
- Supplying water to multifamily buildings, housing estates and farms with high demand.
- Supplying extensive irrigation and sprinkler systems and lowering groundwater levels.
- Water supply and fire protection systems requiring increased flow rates.
WDepending on the performance of the selected model, 6" SPINOX pumps with IPRO oil-filled motors
are suitable for supplying a single large facility as well as installations
serving several buildings or large-scale irrigation systems. The 6" SPINOX 30-17 deep-well pump
(15 kW, 400 V) with an IPRO oil-filled motor is selected individually to match the
parameters of the specific well - its depth, diameter and required output.
The 6" SPINOX pump does not treat water and does not certify that it is suitable for human consumption. If the water is to be used for drinking, cooking or other household purposes, an appropriate water treatment system and water quality monitoring at the point of use must be provided.
Features, description and technical data
The 6" SPINOX with an IPRO oil-filled motor is a multistage submersible pump in which all key structural components – the suction and discharge ports, housing, shaft, impeller, and diffuser – are made of AISI 304 stainless steel. This design provides increased wear resistance and a long service life when operating in contact with raw water, which may contain fine mineral contaminants. The mechanical seal uses a ceramic / SiC / NBR arrangement. The pump is factory-equipped with a check valve to prevent water from flowing back through the discharge pipe after the pump stops.
The pump is driven by an IPRO IOM oil-filled motor, cooled and lubricated by oil in a sealed motor chamber. The power cable length is selected for the specific device variant and well depth. The pump operates in continuous mode, in a vertical or horizontal position, at a maximum pumped liquid temperature of 35°C and insulation class F.
- Device type: multistage submersible pump
- IPRO motor: IPRO (IOM oil-filled motor)
- Model: 6" SPINOX 30-17
- Motor power: 15 kW
- Power supply: 400 V
- Motor construction: oil-filled
- Unit diameter: 131 mm (with 4" motor) / 145 mm (with 6" motor)
- Minimum well diameter: 160 mm
- Materials: suction/discharge ports, housing, shaft, impeller, diffuser – AISI 304 stainless steel; mechanical seal – ceramic / SiC / NBR
- Motor speed: 2850 rpm
- Max. pumped liquid temperature: 35°C
- Protection rating: IP68
- Operating mode: continuous
- Operating position: vertical / horizontal
- Built-in check valve: yes
Technical specifications may vary by production batch. Before installation, we recommend checking the device’s nameplate.
IPRO – 36 months (3 years) manufacturer’s warranty. Dambat provides warranty and post-warranty service.
Dambat – a trusted manufacturer of pumps and hydro-engineering equipment with quality certifications.
Frequently asked questions (FAQ) – 6" SPINOX submersible pump with an IPRO oil-filled motor
What is the 6" SPINOX submersible pump with an IPRO oil-filled motor used for?
The 6" SPINOX with an IPRO oil-filled motor is a multistage submersible pump designed to draw and pump raw / untreated water from large-diameter deep wells before treatment. It is used, among other things, to supply multifamily buildings, farms, and water supply and fire protection systems.
How do I choose the right 6" SPINOX model for my well?
The right model depends on the well’s depth and diameter and the installation’s required capacity. The series includes several hydraulic subcategories with different maximum capacities and power ratings.
What motors are available for the 6" SPINOX submersible pump?
The 6" SPINOX hydraulics can be paired with a 4" or 6" motor, depending on the model: an IPRO WMC water-filled motor, an IPRO IOM oil-filled motor, or an oil-filled motor from the Italian brand IBO Italy. The product name specifies the particular variant (motor type and diameter).
How can I protect the 6" SPINOX pump from running dry?
The pump can be used with dry-run protection that works without installing additional probes or sensors directly in the well, simplifying installation compared with solutions that require separate sensor wiring.
Where can I buy the 6" SPINOX submersible pump manufactured by Dambat?
Dambat does not sell directly. The 6" SPINOX pump is available from our sales partners, plumbing wholesalers, and authorized online distributors.
What are the warranty terms for the 6" SPINOX pump with an IPRO oil-filled motor?
IPRO – 36 months (3 years) manufacturer’s warranty. Dambat provides warranty and post-warranty service.
