6" SPINOX 30-15 (13 kW, 400 V) - multistage stainless steel submersible pump with IPRO water-filled motor
The 6" SPINOX with IPRO water-filled motor is a multistage submersible pump made entirely of AISI 304 stainless steel, designed for drawing and pumping clean, untreated water from drilled deep wells with a minimum internal diameter of 160 mm. The pump is driven by an IPRO WMC water-filled motor. The series includes a range of models with different hydraulic parameters and a wide power range, allowing the right model to be selected for the needs of a specific high-capacity installation.
Who it's for
-
Farms and orchards with high water demand - a capacity of 415 l/min makes it possible to supply extensive irrigation systems for fields, orchards and greenhouse crops from a single water source.
-
Managers of multi-family buildings and housing estates - a single deep well can supply water to several buildings or an entire community in locations without access to the municipal water network.
-
Water supply and fire protection system contractors - the increased flow rate is suitable for systems requiring large volumes of water, including hydrant systems and fire protection tanks.
-
Industrial plants and companies carrying out dewatering work - drawing process water and dewatering excavations and areas with high groundwater levels.
Applications
- Drawing and pumping untreated water from larger-diameter drilled deep wells before treatment.
- Water supply for multi-family buildings, housing estates and farms with high demand.
- Supplying extensive irrigation and sprinkler systems, as well as lowering groundwater levels.
- Water supply and fire protection systems requiring increased flow rates.
With performance depending on the selected model, 6" SPINOX pumps with IPRO water-filled motors are suitable for supplying a single, larger facility as well as installations serving several buildings or larger-scale irrigation systems. The 6" SPINOX 30-15 submersible pump (13 kW, 400 V) with an IPRO water-filled motor is selected individually to match the parameters of the specific well - its depth, diameter, and required capacity.
The 6" SPINOX pump is not a water treatment device and does not certify that the water is suitable for human consumption. If the water is to be used for drinking, cooking, or other domestic purposes, an appropriate water treatment system and water quality monitoring at the point of use must be provided.
Features, description and technical data
The 6" SPINOX with an IPRO water-filled motor is a multistage submersible pump in which all key structural components – the suction and discharge ports, housing, shaft, impeller, and diffuser – are made of AISI 304 stainless steel. This construction provides increased wear resistance and a long service life when operating in contact with untreated water, which may contain fine mineral contaminants. The mechanical seal uses a ceramic / SiC / NBR configuration. The pump comes factory-equipped with a check valve to prevent water from flowing back through the discharge pipe after the pump stops.
The pump is driven by an IPRO WMC water-filled motor. The power cable length is selected for the specific device variant and well depth. The pump operates continuously, in a vertical or horizontal position, at a maximum pumped-liquid temperature of 35°C and insulation class F.
- Device type: multistage submersible pump
- Motor brand: IPRO (WMC water-filled motor)
- Model: 6" SPINOX 30-15
- Motor power: 13 kW
- Power supply: 400 V
- Motor construction: water-filled
- Unit diameter: 131 mm (with 4" motor) / 145 mm (with 6" motor)
- Minimum well diameter: 160 mm
- Materials: suction/discharge port, housing, shaft, impeller, diffuser – AISI 304 stainless steel; mechanical seal – ceramic / SiC / NBR
- Motor speed: 2850 rpm
- Max. temperature of pumped liquid: 35°C
- Protection rating: IP68
- Operating mode: continuous
- Operating position: vertical / horizontal
- Built-in check valve: yes
Technical data may vary by production batch. Before installation, we recommend checking the device’s nameplate.
IPRO – 36 months (3 years) of manufacturer’s warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certifications.
Frequently Asked Questions (FAQ) – 6" SPINOX submersible pump with an IPRO water-filled motor
What is the 6" SPINOX submersible pump with an IPRO water-filled motor used for?
The 6" SPINOX with an IPRO water-filled motor is a multistage submersible pump designed to draw and pump raw/untreated water from large-diameter drilled wells before treatment, including for supplying multifamily buildings, farms, and water supply and fire protection systems.
How do I choose the right 6" SPINOX model for my well?
The right model depends on the well’s depth and diameter, as well as the required system capacity. The range includes several hydraulic subcategories with different maximum flow rates and power ratings.
What motors are available for the 6" SPINOX submersible pump?
The 6" SPINOX hydraulics can be paired with a 4" or 6" motor, depending on the model: an IPRO WMC water-filled motor, an IPRO IOM oil-filled motor, or an oil-filled motor from the Italian brand IBO Italy. The product name specifies the particular option (motor type and diameter).
How can I protect the 6" SPINOX pump against dry running?
The pump can be used with dry-run protection that works without installing additional probes or sensors directly in the well, simplifying installation compared with solutions that require separate sensor wiring.
Where can I buy the 6" SPINOX submersible pump manufactured by Dambat?
Dambat does not sell directly to customers. The 6" SPINOX pump is available from our retail partners, plumbing wholesalers, and authorized online distributors.
What are the warranty terms for the 6" SPINOX pump with an IPRO water-filled motor?
IPRO – 36 months (3 years) of manufacturer’s warranty. Warranty and post-warranty service is provided by Dambat.
